Theory of RPOD adjustment of air volume for mine intelligent ventilation

2021 ◽  
pp. 1-14
Author(s):  
Peng Jia ◽  
Jinzhang Jia ◽  
Lei Song ◽  
Zhuang Li ◽  
Bin Li
Keyword(s):  
Air Volume

Rancang Bangun Sistem Monitoring Pengukuran Volume Air Berbasis IoT Menggunakan Arduino Wemos

2020 ◽  
Vol 6 (2) ◽  
pp. 147-153
Author(s):  
Muhamad Yusup ◽  
Po. Abas Sunarya ◽  
Krisandi Aprilyanto
Keyword(s):  
Waste Water ◽  
Waste Water Treatment ◽  
Water Reservoir ◽  
Ultrasonic Sensor ◽  
Automated System ◽  
Volume Formula ◽  
Air Volume ◽  
Database Server ◽  
A Company ◽  
Height Data

System The process of counting and storing in a manual water reservoir analysis has a high percentage of error rate compared to an automated system. In a company industry, especially in the WWT (Waste Water Treatment) section, it has several reservoir tanks as stock which are still counted manually. The ultrasonic sensor is placed at the top of the WWT tank in a hanging position. Basically, to measure the volume in a tank only variable height is always changing. So by utilizing the function of the ultrasonic sensor and also the tube volume formula, the stored AIR volume can be monitored in real time based on IoT using the Blynk application. From the sensor, height data is obtained which then the formula is processed by Arduino Wemos and then information is sent to the MySQL database server via the WIFI network.

Behaviour of air injection nozzles in dissolved air flotation

1995 ◽  
Vol 31 (3-4) ◽  
pp. 25-35 ◽  
Author(s):  
E. M. Rykaart ◽  
J. Haarhoff
Keyword(s):  
Bubble Coalescence ◽  
Second Phase ◽  
Initial Growth ◽  
Two Phase ◽  
Dissolved Air Flotation ◽  
Nozzle Orifice ◽  
Pressure Release ◽  
Air Volume ◽  
Air Flotation ◽  
Dissolved Air

A simple two-phase conceptual model is postulated to explain the initial growth of microbubbles after pressure release in dissolved air flotation. During the first phase bubbles merely expand from existing nucleation centres as air precipitates from solution, without bubble coalescence. This phase ends when all excess air is transferred to the gas phase. During the second phase, the total air volume remains the same, but bubbles continue to grow due to bubble coalescence. This model is used to explain the results from experiments where three different nozzle variations were tested, namely a nozzle with an impinging surface immediately outside the nozzle orifice, a nozzle with a bend in the nozzle channel, and a nozzle with a tapering outlet immediately outside the nozzle orifice. From these experiments, it is inferred that the first phase of bubble growth is completed at approximately 1.7 ms after the start of pressure release.

Experimental study of the effects of air volume ratios on the air curtain dust cleaning in fully mechanized working face

2021 ◽  
Vol 293 ◽  
pp. 126109
Author(s):  
Hao Wang ◽  
Weimin Cheng ◽  
Zhanyou Sa ◽  
Jie Liu ◽  
Ran Zhang ◽  
...  
Keyword(s):  
Experimental Study ◽  
Air Curtain ◽  
Air Volume ◽  
Working Face

Effect of interstitial fluid (kerosene) on pressure-volume characteristics of rat lung

1982 ◽  
Vol 52 (1) ◽  
pp. 260-266 ◽  
Author(s):  
W. F. Urmey ◽  
S. M. Scharf ◽  
R. Brown ◽  
D. Carlson ◽  
P. Song
Keyword(s):  
Interstitial Fluid ◽  
Transpulmonary Pressure ◽  
Progressive Increase ◽  
Rat Lung ◽  
Interstitial Edema ◽  
Maximal Volume ◽  
Air Volume ◽  
Lung Expansion ◽  
Volume Characteristics ◽  
Alveolar Edema

Although pulmonary interstitial edema has been estimated to decrease pulmonary compliance (CL), it has been experimentally difficult to demonstrate whether the observed changes in CL are directly due to the presence of interstitial fluid or if they result instead from concomitant pulmonary vascular engorgement and/or alveolar edema. Since kerosene-inflated lungs do not leak, we were able to use kerosene to measure the effect on CL of the accumulation of interstitial fluid (kerosene) in the postmortem rat lung. Pressure-volume (PV) studies of the lung were done during the progressive increase in interstitial fluid (kerosene). Analysis of the deflation limbs of the quasistatic PV curves obtained following serial inflations with kerosene indicated that the maximal volume of kerosene [MV35, equal to the maximum tissue plus airway volume at a transpulmonary pressure (Ptp) of 35 cmH2O] was 3.8 +/- 1.2 ml (31.0 +/- 11.8%) greater than TLC35 [air volume at Ptp of 35 cmH2O prior to kerosene inflation]. The increases in interstitial kerosene volume had no effect on kerosene PV characteristics, as was demonstrated by superimposing lung PV curves obtained at various states of interstitial filling. We conclude that the interstitial compartment is large and very compliant and that the presence of even great amounts of fluid limited to this compartment does not restrict lung expansion.

Construction Ventilation Scheme Optimization of Underground Main Powerhouse Based on CFD

2013 ◽  
Vol 368-370 ◽  
pp. 619-623
Author(s):  
Zhen Liu ◽  
Xiao Ling Wang ◽  
Ai Li Zhang
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Flow Field ◽  
Air Flow ◽  
Scheme Optimization ◽  
Pressure Distributions ◽  
Air Volume ◽  
Computational Fluid Dynamics Cfd ◽  
Traditional Construction ◽  
Ventilation Scheme

For the purpose of avoiding the deficiency of the traditional construction ventilation, the ventilation of the underground main powerhouse is simulated by the computational fluid dynamics (CFD) to optimize ventilation parameters. A 3D unsteady RNG k-ε model is performed for construction ventilation in the underground main powerhouse. The air-flow field and CO diffusion in the main powerhouse are simulated and analyzed. The two construction ventilation schemes are modelled for the main powerhouse. The optimized ventilation scheme is obtained by comparing the air volume and pressure distributions of the different ventilation schemes.

scholarly journals The Analysis for Energy Consumption of Marine Air Conditioning System Based on VAV and VWV

2018 ◽  
Vol 38 ◽  
pp. 04012
Author(s):  
Sai Feng Xu ◽  
Xing Lin Yang ◽  
Zou Ying Le
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Air Conditioning ◽  
Water Volume ◽  
Pump System ◽  
Air Conditioning System ◽  
Variable Air Volume ◽  
Air Volume ◽  
Marine Air ◽  
Variable Water

For ocean-going vessels sailing in different areas on the sea, the change of external environment factors will cause frequent changes in load, traditional ship air-conditioning system is usually designed with a fixed cooling capacity, this design method causes serious waste of resources. A new type of sea-based air conditioning system is proposed in this paper, which uses the sea-based source heat pump system, combined with variable air volume, variable water technology. The multifunctional cabins’ dynamic loads for a ship navigating in a typical Eurasian route were calculated based on Simulink. The model can predict changes in full voyage load. Based on the simulation model, the effects of variable air volume and variable water volume on the energy consumption of the air-conditioning system are analyzed. The results show that: When the VAV is coupled with the VWV, the energy saving rate is 23.2%. Therefore, the application of variable air volume and variable water technology to marine air conditioning systems can achieve economical and energy saving advantages.

Sign in / Sign up

Export Citation Format

Share Document