scholarly journals Automobile injury trends in the contemporary fleet: Belted occupants in frontal collisions

2019 ◽  
Vol 20 (6) ◽  
pp. 607-612 ◽  
Author(s):  
Jason Forman ◽  
Gerald S. Poplin ◽  
C. Greg Shaw ◽  
Timothy L. McMurry ◽  
Kristin Schmidt ◽  
...  
Keyword(s):  
2007 ◽  
Author(s):  
David E. Raymond ◽  
Paul C. Begeman ◽  
Hai-Chun Chien ◽  
Cynthia A. Bir

Author(s):  
Russell Frieder ◽  
Sri Kumar

Motor vehicle collisions frequently result in serious or fatal inuries to occupants [1–4]. Frontal collisions are amongst the most severe types of accidents. The use of safety systems such as seat belts and airbags has been shown to reduce the severity of injuries sustained by occupants [5–10]. It is well known that frontal airbags act as supplemental restraints to seat belts in protecting occupants. Airbag deployment occurs through a reaction of chemicals in the inflator that rapidly produces gas and fills the canvas bag. The filled bag acts a cushion between the occupant and the vehicle’s interior components. The supplemental restraint provided by the airbag increases the amount of time and distance over which the occupant’s body decelerates, and accordingly reduces the potential for injury. The time at which the airbag deployment is initiated during the crash sequence can have an effect on the nature of the contact between occupant and airbag. Though properly timed, frontal airbags have been shown to reduce injuries sustained to occupants[11], it has been reported that airbags that deploy too late may cause injury[12]. To date, there have been a very limited number of studies that have addressed the biomechanical effects of late airbag deployment. The purpose of this study is to determine the biomechanical effects of late airbag deployment and restraint use on various sizes of occupants through computer simulation.


Author(s):  
Paul T. Semones ◽  
David A. Renfroe

Tire tread separations on light trucks and SUVs have resulted in numerous catastrophic highway accidents over the past two decades in the United States. These accidents frequently involve single-vehicle rollovers or deviations of the impaired vehicle into oncoming traffic, where high speed frontal collisions may ensue. On light trucks and SUVs equipped with a Hotchkiss rear suspension, one explanation for the loss of driver control during an in-process rear tire tread separation is solid axle tramp response to the imbalanced separating tire. This explanation has met with some controversy. The present study will demonstrate that the imbalance forces generated at highway speeds from a partially detreaded tire are sufficient to induce continuous cyclical axle tramp, and can even be sufficient to completely elevate rear-axle tires out of contact with the paved roadway. This imbalance-induced tramping action may be exacerbated during braking and the vehicle’s terminal yaw, when rear traction is crucial to avoiding a catastrophic accident. In addition to test data, several field examples of such events are presented. A key metric of solid axle response to an imbalanced, partially detreaded tire is shock absorber motion. In the present study, shock absorber displacement on the test vehicles, as measured during highway speed tread separation axle tramp events, is found to oscillate through a stroke generally less than one inch (2.5 cm) in length at a frequency in excess of 10 Hz. Peak instantaneous velocities of the shock absorber have been observed as high as 40 in/s (16 cm/s) or more during straight driving under axle tramp conditions. Confirming several previously published findings, the present study shows that increasing shock damping force at the higher operational velocities of the shock absorber reduces the magnitude of axle tramp and assists in keeping the rear axle tires in contact with the ground. Additionally, increasing the distance between the shock absorbers by moving them closer to the wheels provides the same advantage.


1998 ◽  
Author(s):  
R. W. Rudd ◽  
E. M. Sieveka ◽  
J. R. Crandall ◽  
J. Pellettiere ◽  
S. Lynn ◽  
...  

1980 ◽  
Author(s):  
Thomas F. Maclaughlin ◽  
Roger A. Saul ◽  
Samuel Daniel
Keyword(s):  

2015 ◽  
Vol 15 (06) ◽  
pp. 1540044
Author(s):  
ZHENHAI GAO ◽  
CHUZHAO LI ◽  
HONGYU HU ◽  
KAISHU ZHAO ◽  
HUI ZHAO ◽  
...  

The influence of cervical muscles on the head/neck responses to frontal collisions is an important issue in the design of vehicle safety systems. In this study, spring-type muscles based on a Hybrid III 50th percentile dummy were used. A spring was used to simulate the cervical muscle with the instinctual physiological reaction of a driver. A total of 10 volunteers were recruited for the simulated collision tests and the maximum voluntary contraction tests, and test data were used to establish and design the spring-type muscles. Sled tests were performed using a modified dummy with spring-type muscles, which had similar mechanical characteristics to a human body. The results showed that Ax increased 3.58%, Ay decreased [Formula: see text]10.32%, Az increased 3.21%, Fx increased 12.22%, Fz increased 3.80%, and My decreased significantly ([Formula: see text]16.70% in average) at first but then increased 5.57%, in average. Cervical muscles with the instinctual physiological reaction may increase the potential head injury and potential cervical longitudinal shear injury while decreasing the potential cervical extension injury. The study provides reference for designing dummies by taking into consideration the instinctual physiological reaction of the driver to a collision.


Sign in / Sign up

Export Citation Format

Share Document