scholarly journals Grey water footprint as a tool for wastewater treatment plant assessment– Hostivice case study

2021 ◽  
pp. 1-10
Author(s):  
Lada Stejskalová ◽  
Libor Ansorge ◽  
Jiří Kučera ◽  
Dagmar Vološinová
2018 ◽  
Vol 14 (1) ◽  
pp. 137-144
Author(s):  
Pelin Soyertaş Yapıcıoğlu

Abstract Available fresh water demand of a growing population is a fundamental concern of water resource sustainability. Dairy industry wastewater treatment plants have been considered a major polluter due to the high organic content and large wastewater discharges. Grey water footprint (GWF) was developed by the Water Footprint Network (WFN) as a measure of the water pollution loading. In this study, four treatment scenarios including no treatment process (Scenario-1), primary treatment using Dissolved Air Flotation (DAF) (Scenario-2), secondary treatment using DAF and a Upflow Sludge Bed (UASB) reactor (Scenario-3), and a DAF and UASB with a reuse application applying reverse osmosis (RO) (Scenario-4) have been studied for a full-scale dairy industry wastewater treatment plant. For these four scenarios, GWF assessment was undertaken using the WFN method by taking into consideration three pollutant parameters, chemical oxygen demand (COD), fats, oil and grease (FOG) and total suspended solids (TSS). The results show that the GWF of Scenario-4 for COD was lowest with the value of −5,609 m3/d and Scenario-1 has the highest GWF for TSS with the value of 41,026 m3/d. According to the assessment results, reuse applications decrease the GWF values.


2001 ◽  
Vol 44 (2-3) ◽  
pp. 235-242 ◽  
Author(s):  
B. De heyder ◽  
P. Ockier ◽  
R. Jansen ◽  
R. Huiberts

Several process units at a wastewater treatment plant (WWTP) can produce a significant level of sound and thus induce sound nuisance for nearby residents. The risk for sound nuisance should be considered by making a prognosis of sound impact in an early project phase (planning, design). A prognosis requires information with respect to the sound characteristics of the different process units. This paper reports the development of empirical models for the sound power of relevant process units in the water line at Aquafin WWTPs. The used methodology for model derivation and validation allowed us to minimize the required number of measurements. Besides the methodology, the paper describes in detail the derivation and validation of the empirical model for the splashing water of screw pumps. Also the use of all the derived empirical models to determine the sound impact of a wastewater treatment plant at close distance is illustrated with a case-study.


2012 ◽  
Vol 66 (8) ◽  
pp. 1684-1690 ◽  
Author(s):  
Russell Yap ◽  
Michael Holmes ◽  
William Peirson ◽  
Michael Whittaker ◽  
Richard Stuetz ◽  
...  

Dissolved air flotation (DAF) incorporating filtration (DAFF) is used at the Bolivar wastewater treatment plant (WWTP) to polish lagoon effluent for reuse. Elevated algal populations are frequently experienced and can lead to increased coagulant requirements and process control issues. Streaming current detectors (SCDs) and a charge demand analyser (CDA) were used to monitor the full-scale plant. This was followed by an optimisation study using a pilot plant with a CDA. It was found that the normal operational charge demand range for DAF at Bolivar was between −46 and −40 μeq L−1. Decreasing the pH of coagulation reduced coagulant consumption and facilitated more sensitive CDA responses to changes in alum dose.


Water SA ◽  
2018 ◽  
Vol 44 (4 October) ◽  
Author(s):  
Tilik Tena Wondim ◽  
Bloodless Dzwairo

The challenge of selecting an appropriate wastewater treatment plant (WWTP) site is addressed in this study, using the case study of Bahir Dar City, Ethiopia. An innovative approach is proposed for selecting the WWTP site. Fifteen practically feasible alternatives were identified based on the geographical information system (GIS) based hydraulic design and considering the overall economy of the system. The three dimensions of sustainability were considered while evaluatingalternatives through incorporating economic, social, energy and environmental criteria in decision-making. The multiple attribute decision making (MADM) method was applied to prioritize the alternatives. Four scenarios representing the different perspectives of choices were used for weight elicitation. The results of the study show that the developed decisionmaking approach identified practically feasible alternatives. The framework and decision-making methodology developed in this study helped to facilitate the decision making by local government in a holistic view that incorporates environmental management in the city of Bahir Dar.


Sign in / Sign up

Export Citation Format

Share Document