scholarly journals Sfi1p has conserved centrin-binding sites and an essential function in budding yeast spindle pole body duplication

2003 ◽  
Vol 162 (7) ◽  
pp. 1211-1221 ◽  
Author(s):  
John V. Kilmartin
Keyword(s):  
Single Molecule ◽  
Protein A ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Binding Motif ◽  
Temperature Sensitive ◽  
Pole Body ◽  
Human Proteins ◽  
Z Domain ◽  
Essential Function

Centrins are calmodulin-like proteins present in microtubule-organizing centers. The Saccharomyces cerevisiae centrin, Cdc31p, was functionally tagged with a single Z domain of protein A, and used in pull-down experiments to isolate Cdc31p-binding proteins. One of these, Sfi1p, localizes to the half-bridge of the spindle pole body (SPB), where Cdc31p is also localized. Temperature-sensitive mutants in SFI1 show a defect in SPB duplication and genetic interactions with cdc31-1. Sfi1p contains multiple internal repeats that are also present in a Schizosaccharomyces pombe protein, which also localizes to the SPB, and in several human proteins, one of which localizes close to the centriole region. Cdc31p binds directly to individual Sfi1 repeats in a 1:1 ratio, so a single molecule of Sfi1p binds multiple molecules of Cdc31p. The centrosomal human protein containing Sfi1 repeats also binds centrin in the repeat region, showing that this centrin-binding motif is conserved.

scholarly journals Spc42p: a phosphorylated component of the S. cerevisiae spindle pole body (SPD) with an essential function during SPB duplication.

1996 ◽  
Vol 132 (5) ◽  
pp. 887-901 ◽  
Author(s):  
A D Donaldson ◽  
J V Kilmartin
Keyword(s):  
Nuclear Membrane ◽  
Spindle Pole Body ◽  
Coiled Coil ◽  
Spindle Pole ◽  
Normal Function ◽  
Temperature Sensitive ◽  
Pole Body ◽  
Polymeric Layer ◽  
Essential Function ◽  
Mutant Cells

The 42-kD component of the S. cerevisiae spindle pole body (SPB) localizes to the electron-dense central plaque of the SPB. We have cloned the corresponding gene SPC42 (spindle pole component) and show that it is essential. Seven temperature-sensitive (ts) mutants in SPC42 were prepared by error-prone PCR. We found that a change to a proline residue in a potential coiled-coil region of Spc42p was responsible for the ts phenotype in at least three alleles, suggesting that formation of the coiled-coil is essential in normal function. The mutant cells showed a phenotype of predominantly single or bilobed SPBs often with an accumulation of unstructured electron-dense material associated with the bridge structure adjacent to the SPB. This phenotype suggests a defect in SPB duplication. This was confirmed by examining synchronized mutant cells that lose viability when SPB duplication is attempted. Spc42p is a phosphoprotein which shows some cell cycle-regulated phosphorylation. Overexpression of Spc42p causes the formation of a disc- or dome-shaped polymer composed of phosphorylated Spc42p, which is attached to the central plaque and associated with the outer nuclear membrane. Taken together, these data suggest that Spc42p forms a polymeric layer at the periphery of the SPB central plaque which has an essential function during SPB duplication and may facilitate attachment of the SPB to the nuclear membrane.

scholarly journals A microtubule polymerase cooperates with the kinesin-6 motor and a microtubule cross-linker to promote bipolar spindle assembly in the absence of kinesin-5 and kinesin-14 in fission yeast

2017 ◽  
Vol 28 (25) ◽  
pp. 3647-3659 ◽  
Author(s):  
Masashi Yukawa ◽  
Tomoki Kawakami ◽  
Masaki Okazaki ◽  
Kazunori Kume ◽  
Ngang Heok Tang ◽  
...  
Keyword(s):  
Fission Yeast ◽  
Chromosome Segregation ◽  
Spindle Pole Body ◽  
Spindle Assembly ◽  
Spindle Pole ◽  
Temperature Sensitive ◽  
Bipolar Spindle ◽  
Pole Body ◽  
Cross Linker ◽  
Spindle Elongation

Accurate chromosome segregation relies on the bipolar mitotic spindle. In many eukaryotes, spindle formation is driven by the plus-end–directed motor kinesin-5 that generates outward force to establish spindle bipolarity. Its inhibition leads to the emergence of monopolar spindles with mitotic arrest. Intriguingly, simultaneous inactivation of the minus-end–directed motor kinesin-14 restores spindle bipolarity in many systems. Here we show that in fission yeast, three independent pathways contribute to spindle bipolarity in the absence of kinesin-5/Cut7 and kinesin-14/Pkl1. One is kinesin-6/Klp9 that engages with spindle elongation once short bipolar spindles assemble. Klp9 also ensures the medial positioning of anaphase spindles to prevent unequal chromosome segregation. Another is the Alp7/TACC-Alp14/TOG microtubule polymerase complex. Temperature-sensitive alp7cut7pkl1 mutants are arrested with either monopolar or very short spindles. Forced targeting of Alp14 to the spindle pole body is sufficient to render alp7cut7pkl1 triply deleted cells viable and promote spindle assembly, indicating that Alp14-mediated microtubule polymerization from the nuclear face of the spindle pole body could generate outward force in place of Cut7 during early mitosis. The third pathway involves the Ase1/PRC1 microtubule cross-linker that stabilizes antiparallel microtubules. Our study, therefore, unveils multifaceted interplay among kinesin-dependent and -independent pathways leading to mitotic bipolar spindle assembly.

scholarly journals The Mammalian γ-Tubulin Complex Contains Homologues of the Yeast Spindle Pole Body Components Spc97p and Spc98p

1998 ◽  
Vol 141 (3) ◽  
pp. 663-674 ◽  
Author(s):  
Steven M. Murphy ◽  
Lenore Urbani ◽  
Tim Stearns
Keyword(s):  
Mammalian Cells ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Microtubule Organizing Centers ◽  
Molecular Weights ◽  
Microtubule Polymerization ◽  
Pole Body ◽  
Human Proteins ◽  
Body Components ◽  
Cytoplasmic Complex

γ-Tubulin is a universal component of microtubule organizing centers where it is believed to play an important role in the nucleation of microtubule polymerization. γ-Tubulin also exists as part of a cytoplasmic complex whose size and complexity varies in different organisms. To investigate the composition of the cytoplasmic γ-tubulin complex in mammalian cells, cell lines stably expressing epitope-tagged versions of human γ-tubulin were made. The epitope-tagged γ-tubulins expressed in these cells localize to the centrosome and are incorporated into the cytoplasmic γ-tubulin complex. Immunoprecipitation of this complex identifies at least seven proteins, with calculated molecular weights of 48, 71, 76, 100, 101, 128, and 211 kD. We have identified the 100- and 101-kD components of the γ-tubulin complex as homologues of the yeast spindle pole body proteins Spc97p and Spc98p, and named the corresponding human proteins hGCP2 and hGCP3. Sequence analysis revealed that these proteins are not only related to their respective homologues, but are also related to each other. GCP2 and GCP3 colocalize with γ-tubulin at the centrosome, cosediment with γ-tubulin in sucrose gradients, and coimmunoprecipitate with γ-tubulin, indicating that they are part of the γ-tubulin complex. The conservation of a complex involving γ-tubulin, GCP2, and GCP3 from yeast to mammals suggests that structurally diverse microtubule organizing centers such as the yeast spindle pole body and the animal centrosome share a common molecular mechanism for microtubule nucleation.

scholarly journals Role of calmodulin and Spc110p interaction in the proper assembly of spindle pole body compenents.

1996 ◽  
Vol 133 (1) ◽  
pp. 111-124 ◽  
Author(s):  
H A Sundberg ◽  
L Goetsch ◽  
B Byers ◽  
T N Davis
Keyword(s):  
Spindle Pole Body ◽  
Spindle Pole ◽  
Immunofluorescent Staining ◽  
Temperature Sensitive ◽  
Restrictive Temperature ◽  
Nonpermissive Temperature ◽  
Carboxy Terminus ◽  
Calmodulin Binding ◽  
Pole Body ◽  
Mutant Cells

Previously we demonstrated that calmodulin binds to the carboxy terminus of Spc110p, an essential component of the Saccharomyces cerevisiae spindle pole body (SPB), and that this interaction is required for chromosome segregation. Immunoelectron microscopy presented here shows that calmodulin and thus the carboxy terminus of Spc110p localize to the central plaque. We created temperature-sensitive SPC110 mutations by combining PCR mutagenesis with a plasmid shuffle strategy. The temperature-sensitive allele spc110-220 differs from wild type at two sites. The cysteine 911 to arginine mutation resides in the calmodulin-binding site and alone confers a temperature-sensitive phenotype. Calmodulin overproduction suppresses the temperature sensitivity of spc110-220. Furthermore, calmodulin levels at the SPB decrease in the mutant cells at the restrictive temperature. Thus, calmodulin binding to Spc110-220p is defective at the nonpermissive temperature. Synchronized mutant cells incubated at the nonpermissive temperature arrest as large budded cells with a G2 content of DNA and suffer considerable lethality. Immunofluorescent staining demonstrates failure of nuclear DNA segregation and breakage of many spindles. Electron microscopy reveals an aberrant nuclear structure, the intranuclear microtubule organizer (IMO), that differs from a SPB but serves as a center of microtubule organization. The IMO appears during nascent SPB formation and disappears after SPB separation. The IMO contains both the 90-kD and the mutant 110-kD SPB components. Our results suggest that disruption of the calmodulin Spc110p interaction leads to the aberrant assembly of SPB components into the IMO, which in turn perturbs spindle formation.

scholarly journals Nuf2, a spindle pole body-associated protein required for nuclear division in yeast.

1994 ◽  
Vol 125 (4) ◽  
pp. 853-866 ◽  
Author(s):  
M A Osborne ◽  
G Schlenstedt ◽  
T Jinks ◽  
P A Silver
Keyword(s):  
Nuclear Division ◽  
Spindle Pole Body ◽  
Coiled Coil ◽  
Temperature Shift ◽  
Spindle Pole ◽  
Temperature Sensitive ◽  
Yeast Saccharomyces Cerevisiae ◽  
Culture Cells ◽  
Pole Body ◽  
Associated Proteins

The NUF2 gene of the yeast Saccharomyces cerevisiae encodes an essential 53-kd protein with a high content of potential coiled-coil structure similar to myosin. Nuf2 is associated with the spindle pole body (SPB) as determined by coimmunofluorescence with known SPB proteins. Nuf2 appears to be localized to the intranuclear region and is a candidate for a protein involved in SPB separation. The nuclear association of Nuf2 can be disrupted, in part, by 1 M salt but not by the detergent Triton X-100. All Nuf2 can be removed from nuclei by 8 M urea extraction. In this regard, Nuf2 is similar to other SPB-associated proteins including Nufl/SPC110, also a coiled-coil protein. Temperature-sensitive alleles of NUF2 were generated within the coiled-coil region of Nuf2 and such NUF2 mutant cells rapidly arrest after temperature shift with a single undivided or partially divided nucleus in the bud neck, a shortened mitotic spindle and their DNA fully replicated. In sum, Nuf2 is a protein associated with the SPB that is critical for nuclear division. Anti-Nuf2 antibodies also recognize a mammalian 73-kd protein and display centrosome staining of mammalian tissue culture cells suggesting the presence of a protein with similar function.

scholarly journals Localization of Core Spindle Pole Body (SPB) Components during SPB Duplication in Saccharomyces cerevisiae

1999 ◽  
Vol 145 (4) ◽  
pp. 809-823 ◽  
Author(s):  
Ian R. Adams ◽  
John V. Kilmartin
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Temperature Sensitive ◽  
Large Plaque ◽  
Temperature Sensitive Mutants ◽  
Pole Body ◽  
Cytoplasmic Face ◽  
Preceding Cell

We have examined the process of spindle pole body (SPB) duplication in Saccharomyces cerevisiae by electron microscopy and found several stages. These include the assembly, probably from the satellite, of a large plaque-like structure, the duplication plaque, on the cytoplasmic face of the half-bridge and its insertion into the nuclear envelope. We analyzed the role of the main SPB components in the formation of these structures by identifying them from an SPB core fraction by mass spectrometry. Temperature-sensitive mutants for two of the components, Spc29p and Nud1p, were prepared to partly define their function. The composition of two of the intermediates in SPB duplication, the satellite and the duplication plaque, was examined by immunoelectron microscopy. Both contain cytoplasmic SPB components showing that duplication has already been partly achieved by the end of the preceding cell cycle when the satellite is formed. We show that by overexpression of SPB components the structure of the satellite can be changed and SPB duplication inhibited by disrupting the attachment of the plaque-like intermediate to the half-bridge. We present a model for SPB duplication where binding of SPB components to either end of the bridge structure ensures two separate SPBs.

scholarly journals Two spatially distinct Kinesin-14 Pkl1 and Klp2 generate collaborative inward forces against Kinesin-5 Cut7 inS. pombe

2017 ◽  
Author(s):  
Masashi Yukawa ◽  
Yusuke Yamada ◽  
Tomoaki Yamauchi ◽  
Takashi Toda
Keyword(s):  
Fission Yeast ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Force Balance ◽  
Temperature Sensitive ◽  
Spindle Microtubule ◽  
Pole Body ◽  
Summary Statement ◽  
Proper Force ◽  
Individual Motor

ABSTRACTKinesin motors play central roles in bipolar spindle assembly. In many eukaryotes, spindle pole separation is driven by Kinesin-5 that generates outward force. This outward force is balanced by antagonistic inward force elicited by Kinesin-14 and/or Dynein. In fission yeast, two Kinesin-14s, Pkl1 and Klp2, play an opposing role against Kinesin-5/Cut7. However, how these two Kinesin-14s coordinate individual activities remains elusive. Here we show that while deletion of eitherpkl1orklp2rescues temperature sensitivecut7mutants, onlypkl1deletion can bypass the lethality caused bycut7deletion. Pkl1 is tethered to the spindle pole body, while Klp2 is localized along the spindle microtubule. Forced targeting of Klp2 to the spindle pole body, however, compensates for Pkl1 functions, indicating that cellular localizations, rather than individual motor specificities, differentiate between the two Kinesin-14s. Interestingly, human Kinesin-14/HSET can replace either Pkl1 or Klp2. Moreover, overproducing HSET induces monopolar spindles, reminiscent of the phenotype of Cut7 inactivation. Taken together, this study has uncovered the biological mechanism of how two different Kinesin-14s exert their antagonistic roles against Kinesin-5 in a spatially distinct manner.SUMMARY STATEMENTProper force-balance generated by Kinesin-5 and Kinesin-14 is crucial for spindle bipolarity. Two fission yeast Kinesin-14s localize to different structures, thereby collaboratively producing inward forces against Kinesin-5-mediated outward force.Abbreviations usedGBPGFP-binding proteinMWP complexMsd1-Wdr8-Pkl1 complexSPBspindle pole bodytstemperature sensitiveγ-TuCthe γ-tubulin complex

scholarly journals Mps3p is a novel component of the yeast spindle pole body that interacts with the yeast centrin homologue Cdc31p

2002 ◽  
Vol 159 (6) ◽  
pp. 945-956 ◽  
Author(s):  
Sue L. Jaspersen ◽  
Thomas H. Giddings ◽  
Mark Winey
Keyword(s):  
Mitotic Spindle ◽  
Spindle Pole Body ◽  
Integral Membrane Protein ◽  
Spindle Pole ◽  
Temperature Sensitive ◽  
Nonpermissive Temperature ◽  
Reading Frame ◽  
Pole Body ◽  
Monopolar Spindle

Accurate duplication of the Saccharomyces cerevisiae spindle pole body (SPB) is required for formation of a bipolar mitotic spindle. We identified mutants in SPB assembly by screening a temperature-sensitive collection of yeast for defects in SPB incorporation of a fluorescently marked integral SPB component, Spc42p. One SPB assembly mutant contained a mutation in a previously uncharacterized open reading frame that we call MPS3 (for monopolar spindle). mps3-1 mutants arrest in mitosis with monopolar spindles at the nonpermissive temperature, suggesting a defect in SPB duplication. Execution point experiments revealed that MPS3 function is required for the first step of SPB duplication in G1. Like cells containing mutations in two other genes required for this step of SPB duplication (CDC31 and KAR1), mps3-1 mutants arrest with a single unduplicated SPB that lacks an associated half-bridge. MPS3 encodes an essential integral membrane protein that localizes to the SPB half-bridge. Genetic interactions between MPS3 and CDC31 and binding of Cdc31p to Mps3p in vitro, as well as the fact that Cdc31p localization to the SPB is partially dependent on Mps3p function, suggest that one function for Mps3p during SPB duplication is to recruit Cdc31p, the yeast centrin homologue, to the half-bridge.

scholarly journals NDC10: a gene involved in chromosome segregation in Saccharomyces cerevisiae.

1993 ◽  
Vol 121 (3) ◽  
pp. 503-512 ◽  
Author(s):  
P Y Goh ◽  
J V Kilmartin
Keyword(s):  
Chromosome Segregation ◽  
Staining Pattern ◽  
Essential Gene ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Polyploid Cell ◽  
Temperature Sensitive ◽  
Sensitive Mutant ◽  
Pole Body

A mutant, ndc10-1, was isolated by anti-tubulin staining of temperature-sensitive mutant banks of budding yeast. ndc10-1 has a defect chromosome segregation since chromosomes remains at one pole of the anaphase spindle. This produces one polyploid cell and one aploid cell, each containing a spindle pole body (SPD. NDC10 was cloned and sequenced and is identical to CBF2 (Jiang, W., J. Lechnermn and J. Carbon. 1993. J. Cell Biol. 121:513) which is the 110-kD component of a centromere DNA binding complex (Lechner, J., and J. Carbon. 1991. Cell. 61:717-725). NDC10 is an essential gene. Antibodies to Ndc10p labeled the SPB region in nearly all the cells examined including nonmitotic cells. In some cells with short spindles which may be in metaphase, staining was also observed along the spindle. The staining pattern and the phenotype of ndc10-1 are consistent with Cbf2p/Ndc10p being a kinetochore protein, and provide in vivo evidence for its role in the attachment of chromosomes to the spindle.

Sign in / Sign up

Export Citation Format

Share Document