Corrosion in Tinplate Cans Used for Food Storage. Part 3: Effects of Cysteine, NaCl, and Tomatoes on Corrosion of Tin, Iron and Tinplate

Tinplate cans used to contain foodstuff are fabricated from steel coated with a thin layer of tin and then overcoated with a thin polymeric layer. Previous papers in this series investigated the corrosion behavior of tinplate cans containing chopped tomatoes or one of the chemical components found in cans of chopped tomatoes. The amino acid cysteine was found to be an aggressive agent that can cause corrosion and blackening of the can headspace region. In this study, the corrosion phenomena associated with tinplate cans were investigated by studying the behavior, individually, of uncoated pure tin, iron, and tinplate in chopped tomato, NaCl, and cysteine solutions using electrochemistry, optical microscopy, X-ray diffraction, scanning electron microscopy, and Raman spectroscopy. Black corrosion products, identified as sulfides, formed when the tin, iron, and tinplate specimens were exposed to cysteine solution at three different pH values. The black corrosion products were also found on both iron and tinplate when the samples were immersed in tomato solution. These results indicate that blackening on bare iron and tinplate could form easily from the decomposition of chemical compounds in heated tomatoes.

Effects of Composite Coatings Functionalized with Material Additives Applied on Textile Materials for Cut Resistant Protective Gloves

The objective of the present work was to evaluate the effects of different types of particles added to a polymer paste applied onto a textile carrier on the cut resistance of the resulting material. Knitted aramid textile samples were coated in laboratory conditions using a polymer paste that was functionalized with 12 types of reinforcing particles of different chemical compositions and size fractions. Cut resistance was tested in accordance with the standard EN ISO 13997:1999 and the results were subjected to statistical analysis. The effects of additive particles on the microstructure of the polymeric layer were assessed by means of scanning electron microscopy. The type and size of the particles affected the cut resistance of the functionalized knitted fabric. They were also found to change the morphology of the porous structure. Composite coatings containing the smallest additive particles exhibited the best cut resistance properties.

Photophysical and Electro-Optical Properties of Copolymers Bearing Blue and Red Chromophores for Single-Layer White OLEDs

In this study, novel copolymers consisting of blue and red chromophores are presented to induce emission tuning, enabling the definition of white light emission in a single polymeric layer. These aromatic polyether sulfones exhibit high molecular weights, excellent solubility and processability via solution deposition techniques. In addition, by carefully controlling the molar ratios of chromophores composition, the energy transfer mechanism, from blue to red chromophores, takes place enabling us to define properly the emission covering the entire range of the visible spectrum. The optical and photophysical properties of the monomers and copolymers were thoroughly investigated via NIR-Vis-far UV Spectroscopic Ellipsometry (SE), Absorbance and Photoluminescence (PL). These copolymers are used as an emissive layer and applied in solution-processed WOLED devices. The fabricated WOLED devices have been subsequently studied and characterized in terms of their electroluminescence properties. Finally, the WOLED devices possess high color stability and demonstrate CIE Coordinates (0.33, 0.38), which approach closely the pure white light CIE coordinates.

Manufacture of Binary Nanofeatured Polymeric Films Using Nanosphere Lithography and Ultraviolet Roller Imprinting

This paper describes the manufacture of binary nanostructured films utilizing nanosphere lithography and ultraviolet (UV) roller imprinting. To manufacture the binary nanofeatured template, polystyrene nanocolloids of two distinct dimensions (900 and 300 nm) were primarily self-assembly spun coated on a silicon substrate. A roller imprinting facility equipped with polydimethylsiloxane molds and ultraviolet radiation was employed. During the imprinting procedure, the roller was steered by a motor and compressed the ultraviolet-curable polymeric layer against the glass substrate, where the nanofeatured layer was cured by the UV light source. Binary nanofeatured films were thus obtained. The influence of distinct processing variables on the imprinting of nanofeatured films was investigated. The empirical data suggested that with appropriate processing conditions, binary nanofeatured plastic films can be satisfactorily manufactured. It also demonstrated that roller imprinting combined with ultraviolet radiation can offer an easy yet effective method to prepare binary nanofeatured films, with a miniatured processing time and enhanced part quality.

Controlled Release Utilizing Initiated Chemical Vapor Deposited (iCVD) of Polymeric Nanolayers

This review will focus on the controlled release of pharmaceuticals and other organic molecules utilizing polymeric nanolayers grown by initiated chemical vapor deposited (iCVD). The iCVD layers are able conform to the geometry of the underlying substrate, facilitating release from one- and two-dimensional nanostructures with high surface area. The reactors for iCVD film growth can be customized for specific substrate geometries and scaled to large overall dimensions. The absence of surface tension in vapor deposition processes allows the synthesis of pinhole-free layers, even for iCVD layers <10 nm thick. Such ultrathin layers also provide rapid transport of the drug across the polymeric layer. The mild conditions of the iCVD process avoid damage to the drug which is being encapsulated. Smart release is enabled by iCVD hydrogels which are responsive to pH, temperature, or light. Biodegradable iCVD layers have also be demonstrated for drug release.