scholarly journals Patronin mediates a switch from kinesin-13–dependent poleward flux to anaphase B spindle elongation

2013 ◽  
Vol 203 (1) ◽  
pp. 35-46 ◽  
Author(s):  
Haifeng Wang ◽  
Ingrid Brust-Mascher ◽  
Gul Civelekoglu-Scholey ◽  
Jonathan M. Scholey
Keyword(s):  
Drosophila Melanogaster ◽  
Chromosome Segregation ◽  
Present Evidence ◽  
Spindle Poles ◽  
Spindle Elongation ◽  
Anaphase B ◽  
Poleward Flux

Anaphase B spindle elongation contributes to chromosome segregation during Drosophila melanogaster embryo mitosis. We propose that this process is driven by a kinesin-5–generated interpolar microtubule (MT; ipMT) sliding filament mechanism that engages when poleward flux is turned off. In this paper, we present evidence that anaphase B is induced by the minus end–stabilizing protein Patronin, which antagonizes the kinesin-13 depolymerase KLP10A at spindle poles, thereby switching off the depolymerization of the minus ends of outwardly sliding ipMTs to suppress flux. Although intact cortices, kinetochore MTs, and midzone augmentation are dispensable, this Patronin-based change in ipMT minus-end dynamics is sufficient to induce the elongation of spindles capable of separating chromosomes.

scholarly journals The microtubule cross-linker Feo controls the midzone stability, motor composition, and elongation of the anaphase B spindle in Drosophila embryos

2015 ◽  
Vol 26 (8) ◽  
pp. 1452-1462 ◽  
Author(s):  
Haifeng Wang ◽  
Ingrid Brust-Mascher ◽  
Jonathan M. Scholey
Keyword(s):  
Chromosome Segregation ◽  
Cross Linking ◽  
Cross Link ◽  
Spindle Poles ◽  
Cross Linker ◽  
Spindle Elongation ◽  
Anaphase B ◽  
Drosophila Embryos ◽  
Poleward Flux

Chromosome segregation during anaphase depends on chromosome-to-pole motility and pole-to-pole separation. We propose that in Drosophila embryos, the latter process (anaphase B) depends on a persistent kinesin-5–generated interpolar (ip) microtubule (MT) sliding filament mechanism that “engages” to push apart the spindle poles when poleward flux is turned off. Here we investigated the contribution of the midzonal, antiparallel MT-cross-linking nonmotor MAP, Feo, to this “slide-and-flux-or-elongate” mechanism. Whereas Feo homologues in other systems enhance the midzone localization of the MT-MT cross-linking motors kinesin-4, -5 and -6, the midzone localization of these motors is respectively enhanced, reduced, and unaffected by Feo. Strikingly, kinesin-5 localizes all along ipMTs of the anaphase B spindle in the presence of Feo, including at the midzone, but the antibody-induced dissociation of Feo increases kinesin-5 association with the midzone, which becomes abnormally narrow, leading to impaired anaphase B and incomplete chromosome segregation. Thus, although Feo and kinesin-5 both preferentially cross-link MTs into antiparallel polarity patterns, kinesin-5 cannot substitute for loss of Feo function. We propose that Feo controls the organization, stability, and motor composition of antiparallel ipMTs at the midzone, thereby facilitating the kinesin-5–driven sliding filament mechanism underlying proper anaphase B spindle elongation and chromosome segregation.

Mitotic motors and chromosome segregation: the mechanism of anaphase B

2011 ◽  
Vol 39 (5) ◽  
pp. 1149-1153 ◽  
Author(s):  
Ingrid Brust-Mascher ◽  
Jonathan M. Scholey
Keyword(s):  
Chromosome Segregation ◽  
Cyclin B ◽  
Spindle Poles ◽  
Mitotic Motors ◽  
Balance Of Forces ◽  
Spindle Elongation ◽  
Anaphase B ◽  
Relationship Of ◽  
The Relationship ◽  
Acting In Concert

Anaphase B spindle elongation plays an important role in chromosome segregation. In the present paper, we discuss our model for anaphase B in Drosophila syncytial embryos, in which spindle elongation depends on an ip (interpolar) MT (microtubule) sliding filament mechanism generated by homotetrameric kinesin-5 motors acting in concert with poleward ipMT flux, which acts as an ‘on/off’ switch. Specifically, the pre-anaphase B spindle is maintained at a steady-state length by the balance between ipMT sliding and ipMT depolymerization at spindle poles, producing poleward flux. Cyclin B degradation at anaphase B onset triggers: (i) an MT catastrophe gradient causing ipMT plus ends to invade the overlap zone where ipMT sliding forces are generated; and (ii) the inhibition of ipMT minus-end depolymerization so flux is turned ‘off’, tipping the balance of forces to allow outward ipMT sliding to push apart the spindle poles. We briefly comment on the relationship of this model to anaphase B in other systems.

scholarly journals Nsk1 ensures accurate chromosome segregation by promoting association of kinetochores to spindle poles during anaphase B

2011 ◽  
Vol 22 (23) ◽  
pp. 4486-4502 ◽  
Author(s):  
Graham J. Buttrick ◽  
John C. Meadows ◽  
Theresa C. Lancaster ◽  
Vincent Vanoosthuyse ◽  
Lindsey A. Shepperd ◽  
...  
Keyword(s):  
Chromosome Segregation ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Growth Defect ◽  
Catalytic Subunits ◽  
Spindle Poles ◽  
Sister Chromatids ◽  
Anaphase B ◽  
Novel Protein

Type 1 phosphatase (PP1) antagonizes Aurora B kinase to stabilize kinetochore–microtubule attachments and to silence the spindle checkpoint. We screened for factors that exacerbate the growth defect of Δdis2 cells, which lack one of two catalytic subunits of PP1 in fission yeast, and identified Nsk1, a novel protein required for accurate chromosome segregation. During interphase, Nsk1 resides in the nucleolus but spreads throughout the nucleoplasm as cells enter mitosis. Following dephosphorylation by Clp1 (Cdc14-like) phosphatase and at least one other phosphatase, Nsk1 localizes to the interface between kinetochores and the inner face of the spindle pole body during anaphase. In the absence of Nsk1, some kinetochores become detached from spindle poles during anaphase B. If this occurs late in anaphase B, then the sister chromatids of unclustered kinetochores segregate to the correct daughter cell. These unclustered kinetochores are efficiently captured, retrieved, bioriented, and segregated during the following mitosis, as long as Dis2 is present. However, if kinetochores are detached from a spindle pole early in anaphase B, then these sister chromatids become missegregated. These data suggest Nsk1 ensures accurate chromosome segregation by promoting the tethering of kinetochores to spindle poles during anaphase B.

scholarly journals Central-spindle microtubules are strongly coupled to chromosomes during both anaphase A and anaphase B

2019 ◽  
Vol 30 (19) ◽  
pp. 2503-2514 ◽  
Author(s):  
Che-Hang Yu ◽  
Stefanie Redemann ◽  
Hai-Yin Wu ◽  
Robert Kiewisz ◽  
Tae Yeon Yoo ◽  
...  
Keyword(s):  
Chromosome Segregation ◽  
Tomographic Reconstruction ◽  
Mitotic Spindles ◽  
Strongly Coupled ◽  
Central Spindle ◽  
Spindle Poles ◽  
Meiotic Spindles ◽  
Spindle Microtubules ◽  
Anaphase B ◽  
Chromosome Motion

Spindle microtubules, whose dynamics vary over time and at different locations, cooperatively drive chromosome segregation. Measurements of microtubule dynamics and spindle ultrastructure can provide insight into the behaviors of microtubules, helping elucidate the mechanism of chromosome segregation. Much work has focused on the dynamics and organization of kinetochore microtubules, that is, on the region between chromosomes and poles. In comparison, microtubules in the central-spindle region, between segregating chromosomes, have been less thoroughly characterized. Here, we report measurements of the movement of central-spindle microtubules during chromosome segregation in human mitotic spindles and Caenorhabditis elegans mitotic and female meiotic spindles. We found that these central-spindle microtubules slide apart at the same speed as chromosomes, even as chromosomes move toward spindle poles. In these systems, damaging central-spindle microtubules by laser ablation caused an immediate and complete cessation of chromosome motion, suggesting a strong coupling between central-spindle microtubules and chromosomes. Electron tomographic reconstruction revealed that the analyzed anaphase spindles all contain microtubules with both ends between segregating chromosomes. Our results provide new dynamical, functional, and ultrastructural characterizations of central-spindle microtubules during chromosome segregation in diverse spindles and suggest that central-spindle microtubules and chromosomes are strongly coupled in anaphase.

scholarly journals Anaphase A: Melting Microtubules Move Chromosomes toward Spindle Poles

2017 ◽  
Author(s):  
Charles L. Asbury
Keyword(s):  
Fluorescence Microscopy ◽  
Mechanistic Models ◽  
Chromosome Movement ◽  
Load Bearing ◽  
Spindle Poles ◽  
Sister Chromatids ◽  
Spindle Elongation ◽  
Anaphase B ◽  
Chromosome Movements ◽  
Cellular Movement

The separation of sister chromatids during anaphase is the culmination of mitosis and one of the most strikingly beautiful examples of cellular movement. It consists of two distinct processes: Anaphase A, the movement of chromosomes toward spindle poles via shortening of the connecting fibers, and anaphase B, separation of the two poles from one another via spindle elongation. I focus here on anaphase A chromosome-to-pole movement. The chapter begins by summarizing classical observations of chromosome movements, which support the current understanding of anaphase mechanisms. Live cell fluorescence microscopy studies showed that poleward chromosome movement is associated with disassembly, or ‘melting’ of the kinetochore-attached microtubule fibers that link chromosomes to poles. Microtubule-marking techniques established that kinetochore-fiber disassembly often occurs through a ‘pac-man’ mechanism, where tubulin subunits are lost from kinetochore-attached plus ends and the kinetochore appears to consume its microtubule track as it moves poleward. In addition, kinetochore-fiber disassembly in many cells occurs partly through ‘flux’, where the microtubules flow continuously toward the poles and tubulin subunits are lost from minus ends. Molecular mechanistic models for how load-bearing attachments are maintained to disassembling microtubule ends, and how the forces are generated to drive pac-man and flux-based movements, are discussed.

scholarly journals Central spindle microtubules are strongly coupled to chromosomes during both anaphase A and anaphase B

2019 ◽  
Author(s):  
Che-Hang Yu ◽  
Stefanie Redemann ◽  
Hai-Yin Wu ◽  
Robert Kiewisz ◽  
Tae Yeon Yoo ◽  
...  
Keyword(s):  
Chromosome Segregation ◽  
Tomographic Reconstruction ◽  
Mitotic Spindles ◽  
Strongly Coupled ◽  
Central Spindle ◽  
Spindle Poles ◽  
Meiotic Spindles ◽  
Spindle Microtubules ◽  
Anaphase B ◽  
Chromosome Motion

AbstractSpindle microtubules, whose dynamics vary over time and at different locations, cooperatively drive chromosome segregation. Measurements of microtubule dynamics and spindle ultrastructure can provide insight into the behaviors of microtubules, helping elucidate the mechanism of chromosome segregation. Much work has focused on the dynamics and organization of kinetochore microtubules, i.e. on the region between chromosomes and poles. In comparison, microtubules in the central spindle region, between segregating chromosomes, have been less thoroughly characterized. Here, we report measurements of the movement of central spindle microtubules during chromosome segregation in human mitotic spindles, and Caenorhabditis elegans mitotic and female meiotic spindles. We found that these central spindle microtubules slide apart at the same speed as chromosomes, even as chromosomes move towards spindle poles. In these systems, damaging central spindle microtubules by laser ablation caused an immediate and complete cessation of chromosome motion, suggesting a strong coupling between central spindle microtubules and chromosomes. Electron tomographic reconstruction revealed that the analyzed anaphase spindles all contain microtubules with both ends between segregating chromosomes. Our results provide new dynamical, functional, and ultrastructural characterizations of central spindle microtubules during chromosome segregation in diverse spindles, and suggest that central spindle microtubules and chromosomes are strongly coupled in anaphase.

Structure-function analysis of anaphase spindle elongation using isolated diatom spindles

1991 ◽  
Vol 49 ◽  
pp. 206-207
Author(s):  
W. Z. Cande ◽  
C.J. Hogan ◽  
M. Lee
Keyword(s):  
Morphological Changes ◽  
Function Analysis ◽  
Light And Electron Microscopy ◽  
Near Neighbor ◽  
Model Systems ◽  
Central Spindle ◽  
Spindle Poles ◽  
Spindle Elongation ◽  
Anaphase B

Diatom spindles are important model systems for describing the morphological changes associated with anaphase chromosome movement because the fibrous systems responsible for anaphase A (chromosome-to-pole movement) and anaphase B (spindle elongation) are spatially separate and the central spindle is a paracrystalline array of microtubules. The diatom central spindle, which is responsible for anaphase B, is constructed of two sets of interdigiting microtubules that originate from plate-like spindle poles and display specific near-neighbor interactions in the zone of microtubule overlap. The microtubules of each half-spindle are of relatively unifrom length such that the plus ends are clustered together in narrow zones at each edge of the zone of microtubule overlap. This has allowed us to monitor changes in extent of microtubule overlap in the light microscope with polarization optics. We have isolated spindles from synchronized populations of several species of dividing diatom cells to study the mechanochemistry of anaphase spindle elongation in vitro and to analyze the rearrangement of spindle components by light and electron microscopy during reactivation.

Kinesinsklp5+ andklp6+ are required for normal chromosome movement in mitosis

2002 ◽  
Vol 115 (5) ◽  
pp. 931-940 ◽  
Author(s):  
Robert R. West ◽  
Terra Malmstrom ◽  
J. Richard McIntosh
Keyword(s):  
Chromosome Segregation ◽  
Spindle Assembly Checkpoint ◽  
Extended Period ◽  
Normal Chromosome ◽  
Chromosome Movement ◽  
Dynamic Interactions ◽  
Spindle Elongation ◽  
Synthetically Lethal ◽  
Anaphase B ◽  
Null Mutants

Proper mitotic chromosome segregation requires dynamic interactions between spindle microtubules and kinetochores. Here we demonstrate that two related fission yeast kinesins, klp5+ and klp6+, are required for normal chromosome segregation in mitosis. Null mutants frequently lack a normal metaphase chromosome alignment. Chromosome pairs move back and forth along the spindle for an extended period prior to sister chromatid separation, a phenotype reminiscent of the loss of CENP-E in metazoans. Ultimately, sister chromatids segregate, regardless of chromosome position along the spindle, and viable daughter cells are usually produced. The initiation of anaphase B is sometimes delayed, but the rate of spindle elongation is similar to wildtype. Despite a delay, anaphase B often begins before anaphase A is completed. The klp5Δ and klp6Δ null mutants are synthetically lethal with a deletion of the spindle assembly checkpoint gene, bub1+, several mutants in components of the anaphase promoting complex, and a cold sensitive allele of the kinetochore and microtubule-binding protein, Dis1p. Klp5p-GFP and Klp6p-GFP localize to kinetochores from prophase to the onset of anaphase A, but relocalize to the spindle midzone during anaphase B. These data indicate that Klp5p and Klp6p are kinetochore kinesins required for normal chromosome movement in prometaphase.

scholarly journals The kinesin Eg5 drives poleward microtubule flux in Xenopus laevis egg extract spindles

2004 ◽  
Vol 167 (5) ◽  
pp. 813-818 ◽  
Author(s):  
David T. Miyamoto ◽  
Zachary E. Perlman ◽  
Kendra S. Burbank ◽  
Aaron C. Groen ◽  
Timothy J. Mitchison
Keyword(s):  
Xenopus Laevis ◽  
Chromosome Segregation ◽  
Spindle Poles ◽  
Egg Extract ◽  
Constant Rate ◽  
Quantitative Image ◽  
Meiotic Spindles ◽  
Kinesin Eg5 ◽  
Poleward Flux

Although mitotic and meiotic spindles maintain a steady-state length during metaphase, their antiparallel microtubules slide toward spindle poles at a constant rate. This “poleward flux” of microtubules occurs in many organisms and may provide part of the force for chromosome segregation. We use quantitative image analysis to examine the role of the kinesin Eg5 in poleward flux in metaphase Xenopus laevis egg extract spindles. Pharmacological inhibition of Eg5 results in a dose–responsive slowing of flux, and biochemical depletion of Eg5 significantly decreases the flux rate. Our results suggest that ensembles of nonprocessive Eg5 motors drive flux in metaphase Xenopus extract spindles.

scholarly journals Quantitative analysis of an anaphase B switch: predicted role for a microtubule catastrophe gradient

2007 ◽  
Vol 177 (6) ◽  
pp. 995-1004 ◽  
Author(s):  
Dhanya K. Cheerambathur ◽  
Gul Civelekoglu-Scholey ◽  
Ingrid Brust-Mascher ◽  
Patrizia Sommi ◽  
Alex Mogilner ◽  
...  
Keyword(s):  
Fluorescence Recovery After Photobleaching ◽  
Complete Recovery ◽  
Cyclin B ◽  
Spatial Gradient ◽  
Spindle Poles ◽  
Spindle Elongation ◽  
Anaphase B ◽  
Mechanical Switch ◽  
Lower Recovery ◽  
Drosophila Embryos

Anaphase B in Drosophila embryos is initiated by the inhibition of microtubule (MT) depolymerization at spindle poles, which allows outwardly sliding interpolar (ip) MTs to drive pole–pole separation. Using fluorescence recovery after photobleaching, we observed that MTs throughout the preanaphase B spindle are very dynamic and display complete recovery of fluorescence, but during anaphase B, MTs proximal to the poles stabilize and therefore display lower recovery than those elsewhere. Fluorescence microscopy of the MT tip tracker EB1 revealed that growing MT plus ends localize throughout the preanaphase B spindle but concentrate in the overlap region of interpolar MTs (ipMTs) at anaphase B onset. None of these changes occurred in the presence of nondegradable cyclin B. Modeling suggests that they depend on the establishment of a spatial gradient of MT plus-end catastrophe frequencies, decreasing toward the equator. The resulting redistribution of ipMT plus ends to the overlap zone, together with the suppression of minus-end depolymerization at the poles, could constitute a mechanical switch that initiates spindle elongation.

Sign in / Sign up

Export Citation Format

Share Document