scholarly journals Structure and polymerization of Acanthamoeba myosin-II filaments.

1982 ◽  
Vol 95 (3) ◽  
pp. 816-825 ◽  
Author(s):  
T D Pollard
Keyword(s):  
Heavy Chain ◽  
Divalent Cations ◽  
Critical Concentration ◽  
Myosin Ii ◽  
Thick Filament ◽  
Filament Formation ◽  
Polymerization Mechanism ◽  
Acid Ph ◽  
Thick Filaments

Acanthamoeba myosin-II forms filaments of two different sizes. Thin bipolar filaments 7 nm wide and 200 nm long consist of 16 myosin-II molecules. Thick bipolar filaments of variable width (14-19 nm) consist of 40 or more myosin-II molecules. Both have a central bare zone 90 nm long and myosin heads projecting laterally at the ends. The heads are arranged in rows spaced 15 nm apart. In the case of the thin myosin-II filaments there are two molecules per row. The thick filaments are formed rapidly and reversibly in the presence of 6-10 mM MgCl2 (or any of five other different divalent cations tested) by the lateral aggregation of thin myosin-II filaments. Acid pH also favors thick filament formation. Neither the myosin-II concentration (50-1,000 micrograms/ml) nor ATP has an effect on the morphology of the filaments. The polymerization mechanism was studied quantitatively by measuring the amount of polymer formed (Cp) under various conditions as a function of total myosin-II concentration (Ct). Above a critical concentration of 15-40 micrograms/ml, Cp was proportional to Ct with a slope of 0.5-0.95 depending on conditions. In the range of 0.8-4.9 heavy chain phosphates per molecule, phosphorylation has no effect on the morphology of either the thin or thick myosin-II filaments and only a small effect on the extent of polymerization.

scholarly journals The effect of heavy chain phosphorylation and solution conditions on the assembly of Acanthamoeba myosin-II.

1989 ◽  
Vol 109 (4) ◽  
pp. 1529-1535 ◽  
Author(s):  
J H Sinard ◽  
T D Pollard
Keyword(s):  
Light Scattering ◽  
Ionic Strength ◽  
Myosin Heavy Chain ◽  
Heavy Chain ◽  
Critical Concentration ◽  
Myosin Ii ◽  
Acidic Ph ◽  
Thick Filaments ◽  
Low Ionic Strength

At low ionic strength, Acanthamoeba myosin-II polymerizes into bipolar minifilaments, consisting of eight molecules, that scatter about three times as much light as monomers. With this light scattering assay, we show that the critical concentration for assembly in 50-mM KCl is less than 5 nM. Phosphorylation of the myosin heavy chain over the range of 0.7 to 3.7 P per molecule has no effect on its KCl dependent assembly properties: the structure of the filaments, the extent of assembly, and the critical concentration for assembly are the same. Sucrose at a concentration above a few percent inhibits polymerization. Millimolar concentrations of MgCl2 induce the lateral aggregation of fully formed minifilaments into thick filaments. Compared with dephosphorylated minifilaments, minifilaments of phosphorylated myosin have a lower tendency to aggregate laterally and require higher concentrations of MgCl2 for maximal light scattering. Acidic pH also induces lateral aggregation, whereas basic pH leads to depolymerization of the myosin-II minifilaments. Under polymerizing conditions, millimolar concentrations of ATP only slightly decrease the light scattering of either phosphorylated or dephosphorylated myosin-II. Barring further modulation of assembly by unknown proteins, both phosphorylated and dephosphorylated myosin-II are expected to be in the form of minifilaments under the ionic conditions existing within Acanthamoeba.

scholarly journals Molecular and ultrastructural defects in a Drosophila myosin heavy chain mutant: differential effects on muscle function produced by similar thick filament abnormalities.

1988 ◽  
Vol 107 (6) ◽  
pp. 2601-2612 ◽  
Author(s):  
P T O'Donnell ◽  
S I Bernstein
Keyword(s):  
Myosin Heavy Chain ◽  
Heavy Chain ◽  
Muscle Function ◽  
Flight Muscle ◽  
Thick Filament ◽  
Differential Sensitivity ◽  
Indirect Flight Muscle ◽  
Molecular Defect ◽  
Thick Filaments ◽  
Nuclease Mapping

We have determined the molecular defect of the Drosophila melanogaster myosin heavy chain (MHC) mutation Mhc and the mutation's effect on indirect flight muscle, jump muscle, and larval intersegmental muscle. We show that the Mhc1 mutation is essentially a null allele which results in the dominant-flightless and recessive-lethal phenotypes associated with this mutant (Mogami, K., P. T. O'Donnell, S. I. Bernstein, T. R. F. Wright, C. P. Emerson, Jr. 1986. Proc. Natl. Acad. Sci. USA. 83:1393-1397). The mutation is a 101-bp deletion in the MHC gene which removes most of exon 5 and the intron that precedes it. S1 nuclease mapping indicates that mutant transcripts follow two alternative processing pathways. Both pathways result in the production of mature transcripts with altered reading frames, apparently yielding unstable, truncated MHC proteins. Interestingly, the preferred splicing pathway uses the more distal of two available splice donor sites. We present the first ultrastrutural characterization of a completely MHC-null muscle and show that it lacks any discernable thick filaments. Sarcomeres in these muscles are completely disorganized suggesting that thick filaments play a critical role in sarcomere assembly. To understand why the Mhc1 mutation severely disrupts indirect flight muscle and jump muscle function in heterozygotes, but does not seriously affect the function of other muscle types, we examined the muscle ultrastructure of Mhc1/+ heterozygotes. We find that these organisms have a nearly 50% reduction in the number of thick filaments in indirect flight muscle, jump muscle, and larval intersegmental muscle. In addition, aberrantly shaped thick filaments are common in the jump muscle and larval intersegmental muscle. We suggest that the differential sensitivity of muscle function to the Mhc1 mutation is a consequence of the unique myofilament arrays in each of these muscles. The highly variable myofilament array of larval intersegmental muscle makes its function relatively insensitive to changes in thick filament number and morphology. Conversely, the rigid double hexagonal lattice of the indirect flight muscle, and the organized lattice of the jump muscle cannot be perturbed without interfering with the specialized and evolutionarily more complex functions they perform.

scholarly journals A Structural Model for Phosphorylation Control of Dictyostelium Myosin II Thick Filament Assembly

1999 ◽  
Vol 147 (5) ◽  
pp. 1039-1048 ◽  
Author(s):  
Wenchuan Liang ◽  
Hans M. Warrick ◽  
James A. Spudich
Keyword(s):  
Structural Model ◽  
Myosin Ii ◽  
Coiled Coil ◽  
Thick Filament ◽  
Tail Region ◽  
Filament Assembly ◽  
Dictyostelium Myosin ◽  
Thick Filaments ◽  
Coil Structure

Myosin II thick filament assembly in Dictyostelium is regulated by phosphorylation at three threonines in the tail region of the molecule. Converting these three threonines to aspartates (3×Asp myosin II), which mimics the phosphorylated state, inhibits filament assembly in vitro, and 3×Asp myosin II fails to rescue myosin II–null phenotypes. Here we report a suppressor screen of Dictyostelium myosin II–null cells containing 3×Asp myosin II, which reveals a 21-kD region in the tail that is critical for the phosphorylation control. These data, combined with new structural evidence from electron microscopy and sequence analyses, provide evidence that thick filament assembly control involves the folding of myosin II into a bent monomer, which is unable to incorporate into thick filaments. The data are consistent with a structural model for the bent monomer in which two specific regions of the tail interact to form an antiparallel tetrameric coiled–coil structure.

scholarly journals Thick filament substructures in Caenorhabditis elegans: evidence for two populations of paramyosin.

1993 ◽  
Vol 123 (2) ◽  
pp. 303-311 ◽  
Author(s):  
P R Deitiker ◽  
H F Epstein
Keyword(s):  
Electron Microscopy ◽  
Caenorhabditis Elegans ◽  
Structural Analysis ◽  
Heavy Chain ◽  
Thick Filament ◽  
Myosin Heavy Chain Isoforms ◽  
Nematode Caenorhabditis Elegans ◽  
Thick Filaments ◽  
Nacl Concentration ◽  
Two Populations

The thick filaments of the nematode Caenorhabditis elegans contain two myosin heavy chain isoforms A and B and paramyosin, the products of the myo-3, unc-54, and unc-15 genes, respectively. Dissociation of paramyosin from native thick filaments at pH 6.36 shows a biphasic function with respect to NaCl concentration. Electron microscopy of the remaining structures shows 15-nm core structures that label with monoclonal anti-paramyosin antibody at 72.5-nm intervals. Purified core structures also show 72.5 nm repeats by negative staining. Structural analysis of native thick filaments and dissociated structures suggests that the more dissociable paramyosin is removed radially as well as processively from the filament ends. Minor proteins with masses of 20, 28, and 30 kD cosediment stoichiometrically with paramyosin in purified core structures.

scholarly journals Axial arrangement of the myosin rod in vertebrate thick filaments: immunoelectron microscopy with a monoclonal antibody to light meromyosin.

1985 ◽  
Vol 101 (3) ◽  
pp. 1115-1123 ◽  
Author(s):  
T Shimizu ◽  
J E Dennis ◽  
T Masaki ◽  
D A Fischman
Keyword(s):  
Electron Microscopy ◽  
Monoclonal Antibody ◽  
Myosin Heavy Chain ◽  
Heavy Chain ◽  
Solid Phase ◽  
Strong Support ◽  
Thick Filament ◽  
Repeat Distance ◽  
Thick Filaments ◽  
Axial Translation

A monoclonal antibody, MF20, which has been shown previously to bind the myosin heavy chain of vertebrate striated muscle, has been proven to bind the light meromyosin (LMM) fragment by solid phase radioimmune assay with alpha-chymotryptic digests of purified myosin. Epitope mapping by electron microscopy of rotary-shadowed, myosin-antibody complexes has localized the antibody binding site to LMM at a point approximately 92 nm from the C-terminus of the myosin heavy chain. Since this epitope in native thick filaments is accessible to monoclonal antibodies, we used this antibody as a high affinity ligand to analyze the packing of LMM along the backbone of the thick filament. By immunofluorescence microscopy, MF20 was shown to bind along the entire A-band of chicken pectoralis myofibrils, although the epitope accessibility was greater near the ends than at the center of the A-bands. Thin-section, transmission electron microscopy of myofibrils decorated with MF20 revealed 50 regularly spaced, cross-striations in each half A-band, with a repeat distance of approximately 13 nm. These were numbered consecutively, 1-50, from the A-band to the last stripe, approximately 68 nm from the filament tips. These same striations could be visualized by negative staining of native thick filaments labeled with MF20. All 50 striations were of a consecutive, uninterrupted repeat which approximated the 14-15-nm axial translation of cross-bridges. Each half M-region contained five MF20 striations (approximately 13 nm apart) with a distance between stripes 1 and 1', on each half of the bare zone, of approximately 18 nm. This is compatible with a packing model with full, antiparallel overlap of the myosin rods in the bare zone region. Differences in the spacings measured with negatively stained myofilaments and thin-sectioned myofibrils have been shown to arise from specimen shrinkage in the fixed and embedded preparations. These observations provide strong support for Huxley's original proposal for myosin packing in thick filaments of vertebrate muscle (Huxley, H. E., 1963, J. Mol. Biol., 7:281-308) and, for the first time, directly demonstrate that the 14-15-nm axial translation of LMM in the thick filament backbone corresponds to the cross-bridge repeat detected with x-ray diffraction of living muscle.

The self-assembly of synthetic filaments of myosin isolated from Chaos carolinensis and Amoeba proteus

1977 ◽  
Vol 25 (1) ◽  
pp. 387-402
Author(s):  
J.S. Condeelis
Keyword(s):  
Ionic Strength ◽  
Self Assembly ◽  
Divalent Cations ◽  
Central Zone ◽  
Thick Filament ◽  
Amoeba Proteus ◽  
High Ionic Strength ◽  
Thick Filaments ◽  
Myosin Filaments ◽  
Low Ionic Strength

Synthetic myosin thick filaments were formed from preparations of electrophoretically homogeneous myosin isolated from Chaos carolinensis and Amoeba proteus when dialysed to physiological ionic strength and pH. Myosin dialysed directly against low ionic strength buffers formed native-like thick filaments in the presence and absence of exogenous divalent cations. The average dimensions of the synthetic filaments grown under these conditions were 455 nm long and 16 nm wide with a distinct bare central zone 174 nm long. Myosin predialysed against EGTA-EDTA solutions at high ionic strength and then dialysed to low ionic strength formed native-like filaments only in the presence of 1mM Mg2+. 1 mM Ca2+ could not be substituted for Mg2+ under these conditions to achieve native-like filaments. Filaments grown from predialysed myosin in the absence of Mg2+ resembled EGTA-dissociated myosin filaments observed in EGTA-treated cytoplasm and were highly branched, poorly formed filaments lacking a distinct bare central zone. The average dimensions of the filaments grown from predialysed myosin in the absence of Mg2+ were 328 nm long, 13 nm wide with a bare central zone 111 nm long. Under the conditions tested, myosin isolated from these amoebae did not demonstrate a divalent cation requirement for thick filament formation. The results obtained with myosin isolated from the 2 organisms were identical.

scholarly journals Caenorhabditis elegans Unc-45 Is a Component of Muscle Thick Filaments and Colocalizes with Myosin Heavy Chain B, but Not Myosin Heavy Chain a

2000 ◽  
Vol 148 (2) ◽  
pp. 375-384 ◽  
Author(s):  
Wanyuan Ao ◽  
Dave Pilgrim
Keyword(s):  
Caenorhabditis Elegans ◽  
Myosin Heavy Chain ◽  
Heavy Chain ◽  
Body Wall ◽  
Thick Filament ◽  
The Body ◽  
Temperature Sensitive ◽  
Filament Assembly ◽  
Thick Filaments ◽  
Body Wall Muscles

In the nematode Caenorhabditis elegans, animals mutant in the gene encoding the protein product of the unc-45 gene (UNC-45) have disorganized muscle thick filaments in body wall muscles. Although UNC-45 contains tetratricopeptide repeats (TPR) as well as limited similarity to fungal proteins, no biochemical role has yet been found. UNC-45 reporters are expressed exclusively in muscle cells, and a functional reporter fusion is localized in the body wall muscles in a pattern identical to thick filament A-bands. UNC-45 colocalizes with myosin heavy chain (MHC) B in wild-type worms as well as in temperature-sensitive (ts) unc-45 mutants, but not in a mutant in which MHC B is absent. Surprisingly, UNC-45 localization is also not seen in MHC B mutants, in which the level of MHC A is increased, resulting in near-normal muscle thick filament structure. Thus, filament assembly can be independent of UNC-45. UNC-45 shows a localization pattern identical to and dependent on MHC B and a function that appears to be MHC B–dependent. We propose that UNC-45 is a peripheral component of muscle thick filaments due to its localization with MHC B. The role of UNC-45 in thick filament assembly seems restricted to a cofactor for assembly or stabilization of MHC B.

Sign in / Sign up

Export Citation Format

Share Document