Palm kernel shell and coconut shell are used as a precursor for the production of activated carbon, a way of mitigating the tons of waste produced in Ghana. The raw Palm kernel shell and coconut shell were activated chemically using H3PO4. A maximum activated carbon yield of 26.3 g was obtained for Palm kernel shell and 22.9 g for coconut shell at 400oC, an impregnation ratio of 1.2 and 1-hour carbonization time. Scanning electron microscopy reveals well-developed cavities of the H3PO4 activated coconut shell and Palm kernel shell compared to the non-activated carbon. Iodine number of 743.02 mg/g and 682.11 mg/g, a porosity of 0.31 and 0.49 and the electrical conductivity of 2010 μS/cm and 778 μS /cm were obtained for the AC prepared from the coconut shell and Palm kernel shell respectively. The results of this work show that high-quality activated carbon can be manufactured locally from coconut shell and Palm kernel shell waste, and a scale-up of this production will go a long way to reduce the tons of coconut shell and Palm kernel shell waste generated in the country.
Fabrication and Characterization of Activated Carbon from Charcoal Coconut Shell Minahasa, Indonesia