scholarly journals Quantitative annular dark-field imaging in the scanning transmission electron microscope - a review

2021 ◽  
Author(s):  
Christian Dwyer
Keyword(s):  
Electron Microscope ◽  
Transmission Electron Microscope ◽  
Scanning Transmission Electron Microscope ◽  
Dark Field ◽  
Scanning Transmission Electron ◽  
Dark Field Imaging ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Annular Dark Field ◽  
Field Imaging

Resolution in the Scanning Transmission Electron Microscope

1972 ◽  
Vol 30 ◽  
pp. 454-455
Author(s):  
M. G. R. Thomson
Keyword(s):  
Electron Microscope ◽  
Transmission Electron Microscope ◽  
Spherical Aberration ◽  
Signal To Noise Ratio ◽  
Scanning Transmission Electron Microscope ◽  
Dark Field ◽  
Objective Lens ◽  
Scanning Transmission Electron ◽  
Transmission Electron ◽  
Scanning Transmission

The variation of contrast and signal to noise ratio with change in detector solid angle in the high resolution scanning transmission electron microscope was discussed in an earlier paper. In that paper the conclusions were that the most favourable conditions for the imaging of isolated single heavy atoms were, using the notation in figure 1, either bright field phase contrast with β0⋍0.5 α0, or dark field with an annular detector subtending an angle between ao and effectively π/2.The microscope is represented simply by the model illustrated in figure 1, and the objective lens is characterised by its coefficient of spherical aberration Cs. All the results for the Scanning Transmission Electron Microscope (STEM) may with care be applied to the Conventional Electron Microscope (CEM). The object atom is represented as detailed in reference 2, except that ϕ(θ) is taken to be the constant ϕ(0) to simplify the integration. This is reasonable for θ ≤ 0.1 θ0, where 60 is the screening angle.

Multislice Simulation of Adf Stem Images

1987 ◽  
Vol 45 ◽  
pp. 188-191
Author(s):  
E. J. Kirkland ◽  
R. F. Loane ◽  
J. Silcox
Keyword(s):  
Electron Microscope ◽  
Transmission Electron Microscope ◽  
Scattering Amplitude ◽  
Signal To Noise Ratio ◽  
Scanning Transmission Electron Microscope ◽  
Dark Field ◽  
Heavy Atoms ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Annular Dark Field

The multislice method (e.g. Goodman and Moodie) of simulating bright field conventional transmission electron microscope (BF-CTEM) images of crystalline specimens can be extended to simulation of scanning transmission electron microscope (STEM) images of similar specimens in the annular dark field (ADF) mode. According to the reciprocity theorem (Pogany and Turner and Cowley) BF-CTEM would be equivalent to BF STEM with a point detector. Such a detector (STEM) however would yield an exceedingly small signal to noise ratio. Thus, STEM has found more use in the ADF mode (e.g. Crewe et al.) exploiting the large contrast arising from heavy atoms. In BF imaging (CTEM and STEM) the constrast is roughly proportional to the scattering amplitude f α Z3/4 whereas in DF (CTEM and STEM) imaging it is roughly proportional to the scattering cross σ α Z3/2 where Z is atomic number, a form that is advantageous foatom discrimination.

scholarly journals Determination of Dy substitution site in Nd2−xDyxFe14B by HAADF-STEM and illustration of magnetic anisotropy of “g” and “f” sites, before and after substitution

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Syed Kamran Haider ◽  
Min-Chul Kang ◽  
Jisang Hong ◽  
Young Soo Kang ◽  
Cheol-Woong Yang ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Magnetic Anisotropy ◽  
Transmission Electron Microscope ◽  
Magnetic Moment ◽  
Scanning Transmission Electron Microscope ◽  
Dark Field ◽  
Product Analysis ◽  
Scanning Transmission Electron ◽  
Transmission Electron ◽  
Scanning Transmission

AbstractNd2Fe14B and Nd2−xDyxFe14B (x = 0.25, 0.50) particles were prepared by the modified co-precipitation followed by reduction–diffusion process. Bright field scanning transmission electron microscope (BF-STEM) image revealed the formation of Nd–Fe–B trigonal prisms in [− 101] viewing zone axis, confirming the formation of Nd2Fe14B/Nd2−xDyxFe14B. Accurate site for the Dy substitution in Nd2Fe14B crystal structure was determined as “f” site by using high-angle annular dark field scanning transmission electron microscope (HAADF-STEM). It was found that all the “g” sites are occupied by the Nd, meanwhile Dy occupied only the “f” site. Anti-ferromagnetic coupling at “f” site decreased the magnetic moment values for Nd1.75Dy0.25Fe14B (23.48 μB) and Nd1.5Dy0.5Fe14B (21.03 μB) as compared to Nd2Fe14B (25.50 μB). Reduction of magnetic moment increased the squareness ratio, coercivity and energy product. Analysis of magnetic anisotropy at constant magnetic field confirmed that “f” site substitution did not change the patterns of the anisotropy. Furthermore, magnetic moment of Nd2Fe14B, Nd2−xDyxFe14B, Nd (“f” site), Nd (“g” site) and Dy (“f” site) was recorded for all angles between 0° and 180°.

scholarly journals Determination of Dy Substitution Site in Nd2-xDyxFe14B by HAADF-STEM and Illustration of Magnetic Anisotropy of “g” and “f” Sites, Before and After Substitution

2021 ◽  
Author(s):  
Young Kang ◽  
Syed Haider ◽  
Min-Chul Kang ◽  
Jisang Hong ◽  
Cheol-Woong Yang ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Magnetic Anisotropy ◽  
Transmission Electron Microscope ◽  
Magnetic Moment ◽  
Scanning Transmission Electron Microscope ◽  
Dark Field ◽  
Product Analysis ◽  
Scanning Transmission Electron ◽  
Transmission Electron ◽  
Scanning Transmission

Abstract Nd2Fe14B and Nd2 − xDyxFe14B (x = 0.25,0.50) particles were prepared by the modified co-precipitation followed by reduction-diffusion process. Bright field scanning transmission electron microscope (BF-STEM) image revealed the formation of Nd-Fe-B trigonal prisms in [-101] viewing zone axis, confirming the formation of Nd2Fe14B/Nd2 − xDyxFe14B. Accurate site for the Dy substitution in Nd2Fe14B crystal structure was determined as “f” site by using high-angle annular dark field scanning transmission electron microscope (HAADF-STEM). It was found that all the “g” sites are occupied by the Nd, where’s and Dy occupied only the “f” site. Anti-ferromagnetic coupling at “f” site decreased the magnetic moment values for Nd1.75Dy0.25Fe14B (23.48 µB) and Nd1.5Dy0.5Fe14B (21.03 µB) as compared to Nd2Fe14B (25.50 µB). Reduction of magnetic moment increased the squareness ratio, coercivity and energy product. Analysis of magnetic anisotropy at constant magnetic field confirmed that “f” site substitution did not change the patterns of the anisotropy. Furthermore, magnetic moment of Nd2Fe14B, Nd2 − xDyxFe14B, Nd (“f” site), Nd (“g” site) and Dy (“f” site) was recorded for all angles between 0-180o.

Analytical High-Resolution TEM Study on Au/TiO2 Catalysts

1999 ◽  
Vol 589 ◽  
Author(s):  
T. Akita ◽  
K. Tanaka ◽  
S. Tsubota ◽  
M. Haruta
Keyword(s):  
Electron Microscope ◽  
High Resolution ◽  
Transmission Electron Microscope ◽  
Scanning Transmission Electron Microscope ◽  
Dark Field ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Annular Dark Field ◽  
High Resolution Tem ◽  
Electron Energy Loss

AbstractHRTEM(High-Resolution Transmission Electron Microscope), HAADF-STEM (High Angle Annular Dark Field Scanning Transmission Electron Microscope) and EELS(Electron Energy Loss Spectroscopy) techniques were applied for the characterization of Au/TiO2 catalysts. HAADFSTEM provides precise size distributions for Au particles smaller than ∼2nm in diameter. It was observed that many small particles under 2nm were supported on anatase TiO2 having a large surface area. The HAADF-STEM method was examined as a way to measure the shape of Au particles. EELS measurements were also used to examine the interface between Au and TiO2 support to study electronic structure effects.

Quantitative compositional mapping of InxGa1-XAs/GaAs quantum wells by annular dark field imaging

1995 ◽  
Vol 53 ◽  
pp. 294-295
Author(s):  
S. Hillyard ◽  
Y.-P. Chen ◽  
W.J. Schaff ◽  
L.F. Eastman ◽  
J. Silcox
Keyword(s):  
Electron Microscope ◽  
High Resolution ◽  
Quantum Wells ◽  
Transmission Electron Microscope ◽  
Dark Field ◽  
Thickness Variation ◽  
Dark Field Imaging ◽  
Transmission Electron ◽  
Annular Dark Field ◽  
Field Imaging

Annular dark field imaging in the scanning transmission electron microscope (STEM) exhibits both high resolution and Z-contrast. It is intrinsically quantitative since image data can be recorded directly from linear detectors into digital memory. Annular dark field imaging has been used, along with energy filtered imaging to correct for sample thickness variation, to map out the In concentration in InxGa1-xAs quantum wells with near atomic resolution and sensitivity. This approach is similar to “chemical lattice imaging”, which maps out composition variation using a conventional transmission electron microscope image and a vector pattern recognition algorithm.The quantum wells were grown by molecular-beam epitaxy (MBE). Figure 1 shows a typical high resolution annular dark field image of a 50 Å wide nominal In0.3Ga0.7As/GaAs quantum well. The linescan in figure 2 gives the actual numbers making up the image. Barring contaminants and lattice imperfections, the change in intensity with position is caused by two things: variation of In concentration and thickness.

Sign in / Sign up

Export Citation Format

Share Document