scholarly journals Development and Validation of a Stability-Indicating Column High-Performance Liquid Chromatographic Assay Method for Determination of Nebivolol in Tablet Formulation

2008 ◽  
Vol 91 (3) ◽  
pp. 557-561 ◽  
Author(s):  
Pankaj K Kachhadia ◽  
Ashish S Doshi ◽  
Hitendra S Joshi
Keyword(s):  
High Performance ◽  
High Performance Liquid Chromatographic ◽  
Assay Method ◽  
Array Detector ◽  
Solution Stability ◽  
Pharmaceutical Dosage Forms ◽  
Stability Indicating ◽  
Relative Standard ◽  
Liquid Chromatographic

Abstract A simple, precise, and accurate isocratic reversed-phase (RP) stability-indicating column high-performance liquid chromatographic (HPLC) assay method was developed and validated for determination of nebivolol in solid pharmaceutical dosage forms. Isocratic RP-HPLC separation was achieved on a Phenomenex Luna C8 (2) column (250 mm 4.6 mm id, 5 m particle size) using mobile phase composed of acetonitrilepH 3.5 phosphate buffer (35 + 65, v/v) at a flow rate of 1.0 mL/min, and detection was performed at 280 nm using a photodiode array detector. The drug was subjected to oxidation, hydrolysis, photolysis, and heat to apply stress conditions. The method was validated for specificity, linearity, precision, accuracy, robustness, and solution stability. The method was linear in the drug concentration range of 40160 g/mL with a correlation coefficient of 0.9999. The repeatability relative standard deviation (RSD) for 6 samples was 0.69, and the intermediate precision (RSD) for 6 samples was 1.39. The accuracy (recovery) was between 98.57 and 99.55. Degradation products produced as a result of stress studies did not interfere with detection of nebivolol, and the assay can thus be considered stability-indicating.

scholarly journals New High-Performance Liquid Chromatographic Method for Determination of Clopidogrel in Coated Tablets

2008 ◽  
Vol 91 (1) ◽  
pp. 67-72 ◽  
Author(s):  
Juliana Sippel ◽  
Letcia L Sfair ◽  
Elfrides E S Schapoval ◽  
Martin Steppe
Keyword(s):  
Mobile Phase ◽  
High Performance ◽  
Chromatographic Method ◽  
High Performance Liquid Chromatographic ◽  
Array Detector ◽  
Aqueous Sample ◽  
Liquid Chromatographic Method ◽  
Relative Standard ◽  
Liquid Chromatographic

Abstract A new high-performance liquid chromatographic method was developed and validated for clopidogrel determination in pharmaceutical formulations. The system consisted of an ACE 5 octadecylsilane (C18; 150 4.6 mm id), 5.0 m particle size column; methanol0.1 triethylamine (75 + 25, v/v), pH 5.3, mobile phase at a flow rate of 1.2 mL/min; and a diode array detector set at 220 nm. Specificity, linearity, precision, accuracy, and robustness were the parameters evaluated. The retention time for clopidogrel was 6.8 min. To estimate specificity, an aqueous sample solution was subjected to degradation by ultraviolet light and by acid, alkaline, and oxidation media. The peaks of degradation products did not interfere with the compound signal, and there was no interference when a placebo solution was analyzed. Linearity over a concentration range of 10.0 to 90.0 g/mL was shown (correlation coefficient = 0.9998). Low values of relative standard deviation indicated the adequate intraday and interday precision. The average recovery was found as 99.16. In the robustness test, small modifications to the mobile phase composition did not affect the determination of clopidogrel. The proposed method proved to be simple, fast, and cost efficient for the intended use.

scholarly journals Validated Column High-Performance Liquid Chromatographic Method for Determination of Aspirin and Clopidogrel in Combined Tablets in the Presence of Degradation Products Formed Under ICHRecommended Stress Conditions

2009 ◽  
Vol 92 (1) ◽  
pp. 152-157 ◽  
Author(s):  
Pankaj K Kachhadia ◽  
Ashish S Doshi ◽  
Hitendra S Joshi
Keyword(s):  
High Performance ◽  
Degradation Products ◽  
Parent Compound ◽  
High Performance Liquid Chromatographic ◽  
Stress Conditions ◽  
Assay Method ◽  
Forced Degradation ◽  
Relative Standard ◽  
Liquid Chromatographic

Abstract The development and validation of a column high-performance liquid chromatographic assay method for the determination of aspirin and clopidogrel in tablet formulation are described. The combination formulation was subjected to International Conference on Harmonization-recommended stress conditions. Separation of the drugs from the degradation products formed under stress conditions was achieved on an octasilyl (C8) column using 0.3 orthophosphoric acidacetonitrile (65 + 35, v/v) mobile phase. The method was validated for specificity, linearity, limits of detection and quantification, precision, accuracy, and robustness. The method was found to be specific against placebo interference and during the forced degradation. The response was linear in the concentration range of 30.0120.0 g/mL for aspirin and 15.060.0 g/mL for clopidogrel, with a correlation coefficient of 0.9999 for both. The relative standard deviation values for intra- and interday precision were <2.0. The accuracy was between 99.12 and 99.83 for aspirin and 98.20 and 100.35 for clopidogrel. Stress testing showed degradation products that were well-separated from the parent compound, confirming the stability-indicating capacity of the method.

scholarly journals Simultaneous Determination of Paracetamol, Phenylephrine Hydrochloride, Oxolamine Citrate and Chlorpheniramine Maleate by HPLC in Pharmaceutical Dosage Forms

2011 ◽  
Vol 8 (3) ◽  
pp. 1275-1279 ◽  
Author(s):  
Ozan Pirol ◽  
Murat Sukuroglu ◽  
Tuncel Ozden
Keyword(s):  
High Performance ◽  
High Performance Liquid Chromatographic ◽  
Dosage Forms ◽  
Control Analysis ◽  
Chlorpheniramine Maleate ◽  
Pharmaceutical Dosage Forms ◽  
Phenylephrine Hydrochloride ◽  
Relative Standard ◽  
Liquid Chromatographic

A new high performance liquid chromatographic (HPLC) method was developed for the determination of paracetamol, phenylephrine hydrochloride, oxolamine citrate and chlorpheniramine maleate in combined pharmaceutical formulations and dosage forms. The separation was performed on an Agilent Zorbax SB-CN column with the mobile phase consisting of 0.02 M phosphate buffer (pH:4) and acetonitrile (85:15,v/v) in flow rate 1.5 mL at 22 °C. The overall retention time of the analytes was 3.5 min. The method was validated with respect to linearity, precision, accuracy and recovery. The relative standard deviation for 10 replicate measurements of paracetamol, phenylephrine HCl, oxolamine citrate and chlorpheniramine maleate were 0.12, 0.36 0.18 and 0.59%, respectively. Total recoveries of analytes were 99.99, 100.56, 100.20 and 99.60%, respectively. No chromatographic interference from the tablet excipients was found. The linearity of paracetamol, phenylephrine HCl, oxolamine citrate and chlorpheniramine maleate were in the range of 20-120 μg/mL, 0.4-2.4 μg/mL, 8-48 μg/mL and 0.16-0.96 μg/mL, respectively. This simple, fast, economical and precise high performance liquid chromatographic method can be adopted for routine quality control analysis.

Stability Indicating Liquid Chromatographic Method for the Determination of Fenofibrate and its Application to Kinetic Studies

2013 ◽  
Vol 5 (4) ◽  
pp. 1866-1874
Author(s):  
K. Srinivasa Rao ◽  
Keshar N K ◽  
N Jena ◽  
M.E.B Rao ◽  
A K Patnaik
Keyword(s):  
Degradation Products ◽  
Kinetic Studies ◽  
Pharmaceutical Formulations ◽  
Assay Method ◽  
Pharmaceutical Dosage Form ◽  
Stability Indicating ◽  
Zero Order Kinetics ◽  
Relative Standard ◽  
Liquid Chromatographic

A stability-indicating LC assay method was developed for the quantitative determination of fenofibrate (FFB) in pharmaceutical dosage form in the presence of its degradation products and kinetic determinations were evaluated in acidic, alkaline and peroxide degradation conditions. Chromatographic separation was achieved by use of Zorbax C18 column (250 × 4.0 mm, 5 μm). The mobile phase was established by mixing phosphate buffer (pH adjusted 3 with phosphoric acid) and acetonitrile (30:70 v/v). FFB degraded in acidic, alkaline and hydrogen peroxide conditions, while it was more stable in thermal and photolytic conditions. The described method was linear over a range of 1.0-500 μg/ml for determination of FFB (r= 0.9999). The precision was demonstrated by relative standard deviation (RSD) of intra-day (RSD= 0.56– 0.91) and inter-day studies (RSD= 1.47). The mean recovery was found to be 100.01%. The acid and alkaline degradations of FFB in 1M HCl and 1M NaOH solutions showed an apparent zero-order kinetics with rate constants 0.0736 and 0.0698  min−1 respectively and the peroxide degradation with 5% H2O2 demonstrated an apparent first-order kinetics with rate constant k = 0.0202 per min. The t1/2, t90   values are also determined for all the kinetic studies. The developed method was found to be simple, specific, robust, linear, precise, and accurate for the determination of FFB in pharmaceutical formulations.  

scholarly journals Determination of Finasteride in Tablets by High Performance Liquid Chromatography

2007 ◽  
Vol 4 (1) ◽  
pp. 109-116 ◽  
Author(s):  
K. Basavaiah ◽  
B. C. Somashekar
Keyword(s):  
High Performance ◽  
Internal Standard ◽  
High Performance Liquid Chromatographic ◽  
Reversed Phase ◽  
Calibration Graph ◽  
Official Method ◽  
Pharmaceutical Dosage Forms ◽  
Bulk Drug ◽  
Liquid Chromatographic

A rapid, highly sensitive high performance liquid chromatographic method has been developed for the determination of finasteride(FNS) in bulk drug and in tablets. FNS was eluted from a ODS C18reversed phase column at laboratory temperature (30 ± 2°C) with a mobile phase consisting of methanol and water (80+20) at a flow rate of 1 mL min-1with UV detection at 225 nm. The retention time was ∼ 6.1 min and each analysis took not more than 10 min. Quantitation was achieved by measurement of peak area without using any internal standard. Calibration graph was linear from 2.0 to 30 μg mL-1with limits of detection (LOD) and quantification (LOQ) being 0.2 and 0.6 μg mL-1, respectively. The method was validated according to the current ICH guidelines. Within-day co efficients of variation (CV) ranged from 0.31 to 0.69% and between-day CV were in the range 1.2-3.2%. Recovery of FNS from the pharmaceutical dosage forms ranged from 97.89 – 102.9 with CV of 1.41-4.13%. The developed method was compared with the official method for FNS determination in its tablet forms.

scholarly journals Development of a New High-Performance Liquid Chromatographic Method for the Determination of Ceftazidime

2008 ◽  
Vol 91 (4) ◽  
pp. 739-743 ◽  
Author(s):  
Andréia de Haro Moreno ◽  
Hérida Regina Nunes Salgado
Keyword(s):  
High Performance ◽  
High Performance Liquid Chromatographic ◽  
Reversed Phase ◽  
Hplc Method ◽  
Calibration Graph ◽  
Raw Material ◽  
Relative Standard ◽  
Validation Parameters ◽  
Liquid Chromatographic

Abstract A rapid, accurate, and sensitive high-performance liquid chromatographic (HPLC) method was developed and validated for the determination of ceftazidime in pharmaceuticals. The method validation parameters yielded good results and included range, linearity, precision, accuracy, specificity, and recovery. The excipients in the commercial powder for injection did not interfere with the assay. Reversed-phase chromatography was used for the HPLC separation on a Waters C18 (WAT 054275; Milford, MA) column with methanolwater (70 + 30, v/v) as the mobile phase pumped isocratically at a flow rate of 1.0 mL/min. The effluent was monitored at 245 nm. The calibration graph for ceftazidime was linear from 50.0 to 300.0 g/mL. The values for interday and intraday precision (relative standard deviation) were <1. The results obtained by the HPLC method were calculated statistically by analysis of variance. We concluded that the HPLC method is satisfactory for the determination of ceftazidime in the raw material and pharmaceuticals.

Sign in / Sign up

Export Citation Format

Share Document