Assessment of burn surface area

2019 ◽  
pp. 67-76
Author(s):  
Rowan Pritchard-Jones ◽  
Kayvan Shokrollahi
Keyword(s):  
Surface Area ◽  
Body Surface Area ◽  
Body Surface ◽  
Gold Standard ◽  
Burn Injury ◽  
Total Body Surface Area ◽  
Injured Patient ◽  
Crucial Step ◽  
Total Body

Assessment of total body surface area of a burn injured patient is a crucial step in managing burn injury. The chapter describes a number of techniques from using the size of the patient’s palm as an estimate of 1% to the gold standard Lund and Browder Chart. Key caveats are explained, copies of the charts included as well as the use of the CE certified app Mersey Burns.

511 Point-of-care 3-dimensional Body Mapping for Determining Total Body Surface Area in Severely Burned Patients

2020 ◽  
Vol 41 (Supplement_1) ◽  
pp. S92-S93
Author(s):  
Julia Loegering ◽  
Kevin Webb ◽  
Jesse Ahlquist ◽  
Kevin Krause ◽  
Karen Xu ◽  
...  
Keyword(s):  
Surface Area ◽  
Body Surface Area ◽  
Body Surface ◽  
Gold Standard ◽  
Burn Injury ◽  
Point Of Care ◽  
Total Body Surface Area ◽  
Body Mapping ◽  
Burn Care ◽  
Total Body

Abstract Introduction With severe burn injury, there is systemic fluid loss due to inflammatory responses in damaged tissue, leading to disruption of cellular processes. Patient fluid levels are restored with the calculation of total body surface area (TBSA). Clinically used TBSA equations are often outdated and inaccurate with error up to 20%, resulting in misinformed treatment and subsequent sequelae including prolonged hospital length of stay and increased mortality. Our objective, therefore, was to create a point-of-care (POC) system employing 3D imaging technology to accurately calculate TBSA for all patient population varieties. Methods Our team employed an iPad attachable, infrared scanner to create 3D models of the human body. From these models, TBSA can be extrapolated using scan processing software. Subject scans were collected on our device and on a gold standard scanner for comparison of TBSA output. Clinical testing on burn patients is occurring at present to establish scanning precision of TBSA in the burn care environment. Results Non-clinical verification tests of the 3D scanned TBSA revealed a 4.05% error when compared to the gold standard, and precision error of 3.8%. Additionally, we introduced the device into the burn unit for preliminary testing with a physician user and non-patient subjects. The subjects were scanned in a prone position to mimic burn care workflow. Clinician scanning error was 1.41% when compared to the gold standard scan of the same subject. Clinical precision study results are on-going in collection. Conclusions Our device introduces an improved method of TBSA estimation to assist clinicians in making accurate burn care decisions and further precision medicine with greater anthropomteric data, notably for children. This device is one of the first POC-3D scanning technologies to be used in a burn setting and may also be employed at outlying medical facilities. Destructive wildfires and combat burn injuries highlight the need for such a device to standardize the triage of burn victims with and away from experienced medical staff. Applicability of Research to Practice 3D body mapping points to an enhanced method of TBSA calculation and minimally disruptive to the burn workflow. Future developments of 3D scanning include deep learning algorithms to identify and better assess burned surface area. Additionally, further automation of TBSA scan processing to reduce user error in calculation and improve burn injury outcomes.

scholarly journals Prevalence and associated predictors for patients developing chronic neuropathic pain following burns

2020 ◽  
Vol 8 ◽  
Author(s):  
Kevin M Klifto ◽  
A Lee Dellon ◽  
C Scott Hultman
Keyword(s):  
Mechanical Ventilation ◽  
Neuropathic Pain ◽  
Surface Area ◽  
Body Surface Area ◽  
Body Surface ◽  
Burn Injury ◽  
Total Body Surface Area ◽  
Chronic Neuropathic Pain ◽  
Burn Center ◽  
Total Body

Abstract Background Chronic pain, unrelated to the burn itself, can manifest as a long-term complication in patients sustaining burn injuries. The purpose of this study was to determine the prevalence of chronic neuropathic pain (CNP) and compare burn characteristics between patients who developed CNP and patients without CNP who were treated at a burn center. Methods A single-center, retrospective analysis of 1880 patients admitted to the adult burn center was performed from 1 January 2014 to 1 January 2019. Patients included were over the age of 15 years, sustained a burn injury and were admitted to the burn center. CNP was diagnosed clinically following burn injury. Patients were excluded from the definition of CNP if their pain was due to an underlying illness or medication. Comparisons between patients admitted to the burn center with no pain and patients admitted to the burn center who developed CNP were performed. Results One hundred and thirteen of the 1880 burn patients developed CNP as a direct result of burn injury over 5 years with a prevalence of 6.01%. Patients who developed CNP were a significantly older median age (54 years vs. 46 years, p = 0.002), abused alcohol (29% vs. 8%, p < 0.001), abused substances (31% vs. 9%, p < 0.001), were current daily smokers (73% vs. 33%, p < 0.001), suffered more full-thickness burns (58% vs. 43%, p < 0.001), greater median percent of total body surface area (%TBSA) burns (6 vs. 3.5, p < 0.001), were more often intubated on mechanical ventilation (33% vs. 14%, p < 0.001), greater median number of surgeries (2 vs. 0, p < 0.001) and longer median hospital length of stay (LOS) (10 days vs. 3 days, p < 0.001), compared to those who did not develop CNP, respectively. Median patient follow-up was 27 months. Conclusions The prevalence of CNP over 5 years was 6.01% in the burn center. Older ages, alcohol abuse, substance abuse, current daily smoking, greater percent of total body surface area (%TBSA) burns, third degree burns, being intubated on mechanical ventilation, having more surgeries and longer hospital LOS were associated with developing CNP following burn injury, compared to patients who did not develop CNP following burn injury.

scholarly journals Recovery from an Eighty-Percent Total Body Surface Area Burn Injury Sustained at Work

2012 ◽  
Vol 63 (2) ◽  
pp. 223-226
Author(s):  
Helga Hahn
Keyword(s):  
Intensive Care Unit ◽  
Intensive Care ◽  
Surface Area ◽  
Body Surface Area ◽  
Body Surface ◽  
Initial Treatment ◽  
Burn Injury ◽  
Total Body Surface Area ◽  
Hot Water ◽  
Total Body

Recovery from an Eighty-Percent Total Body Surface Area Burn Injury Sustained at WorkThis article presents a case of severe burn injury at work involving 80 % of body surface area and patient treatment and rehabilitation, which resulted in preserved working ability. The worker was injured by hot water and steam. After initial treatment in the intensive care unit, he underwent comprehensive clinical and outpatient rehabilitation that took 92 weeks, after which he returned to work. His working disability was 100 % after the initial treatment in the intensive care unit, but rehabilitation improved it to 50 %. It should always be kept in mind that even patients with serious or life-threatening injuries can be reintegrated into the workforce if patients, physicians, occupational physicians, and employers all work together.

Referral Patterns of Burn Injury in Rural Kenya

2020 ◽  
Author(s):  
Mary A Hunter ◽  
Kimutai Sylvester ◽  
Russell E White ◽  
David T Harrington ◽  
Patrick M Vivier ◽  
...  
Keyword(s):  
Travel Time ◽  
Surface Area ◽  
Body Surface Area ◽  
Body Surface ◽  
Burn Injury ◽  
Trauma System ◽  
Total Body Surface Area ◽  
Bivariate Analysis ◽  
Rural Kenya ◽  
Total Body

Abstract Burn injury represents a substantial burden of disease in resource-limited settings. Kenya has no formal trauma system and referral practices for burn injuries are not well understood. The purpose of this study was to determine the factors associated with burn injury referrals in rural Kenya. A retrospective chart review was conducted for patients with burn injury from January 1, 2014 to December 31, 2017 at a 300-bed faith-based, teaching hospital in southwest Kenya. Bivariate analysis compared referred and non-referred patients. Multivariable logistic regression was used to assess the association between burn severity and odds of referral adjusting for age, sex, insurance, time from injury to arrival, and estimated travel time from home to hospital. The study included 171 patients with burn injury; 11 patients were excluded due to missing referral data. Of the 160 patients, 31.9% (n = 51) were referred. Referral patients had higher average total body surface area burn (23.1 ± 2.4% vs 11.1 ± 1.2%, P < .001), were more likely to have full-thickness burns (41.3% vs 25.5%, P = .05), and less likely to present to the referral hospital within 24 hours after injury (47.8% vs 73.0%, P = .005). Referral patients had longer travel time to hospital (90+ min: 52.9% vs 22.0%, P < .001). Odds of referral increased 1.62 times (95% confidence interval: 1.19–2.22) for every 10% increase in total body surface area burn. Without a coordinated trauma system, referrals represent a substantial portion of burn injury patients at a hospital in rural Kenya. Referred patients present with more severe burns and experience delays to presentation.

Fluid therapy in burns

2012 ◽  
Vol 19 (3) ◽  
pp. 213-214
Author(s):  
Folke Sjöberg
Keyword(s):  
Surface Area ◽  
Body Surface Area ◽  
Body Surface ◽  
Fluid Therapy ◽  
Burn Injury ◽  
Total Body Surface Area ◽  
Treatment Strategies ◽  
Survival Chance ◽  
Area Burned ◽  
Total Body

Outcome after burn injury, as also paralleled by other trauma, has been improving steadily over the years. In this aspect a significant improvement was seen especially in the 1970-ties when the 50% survival chance from a burn injury increased from 45% total body surface area burned (TBSA%) in a 21 year old patient up to almost 80% (TBSA%). Although this improvement may be claimed to have many reasons, a significant one that needs to be stressed is the introduction of more thorough use of protocolized fluid treatment strategies

Pediatric Treadmill Friction Burns to the Hand: Outcomes of an Initial Nonoperative Approach

2020 ◽  
Author(s):  
Nikita Batra ◽  
Yinan Zheng ◽  
Emily C Alberto ◽  
Omar Z Ahmed ◽  
Megan Cheng ◽  
...  
Keyword(s):  
Surface Area ◽  
Body Surface Area ◽  
Body Surface ◽  
Cox Regression ◽  
Total Body Surface Area ◽  
Wound Management ◽  
Cox Regression Analysis ◽  
Treatment Type ◽  
Total Body ◽  
Hand Burns

Abstract Treadmill burns that occur from friction mechanism are a common cause of hand burns in children. These burns are deeper and more likely to require surgical intervention compared to hand burns from other mechanisms. The purpose of this study was to identify the factors associated with healing time using an initial nonoperative approach. A retrospective chart review was performed examining children (<15 years) who were treated for treadmill burns to the hand between 2012 and 2019. Patient age, burn depth, total body surface area of the hand injury, and time to healing were recorded. Topical wound management strategies (silver sheet, silver cream, non-silver sheet, and non-silver cream) and associated treatment durations were determined. For patients with burns to bilateral hands, the features, treatment, and outcomes of each hand were assessed separately. Cox regression analysis was used to evaluate the association between time to healing and patient characteristics and treatment type. Seventy-seven patients with 86 hand burns (median age 3 years, range 1–11) had a median total body surface area per hand burn of 0.8% (range 0.1–1.5%). Full-thickness burns (n = 47, 54.7%) were associated with longer time to healing compared to partial-thickness burns (HR 0.28, CI 0.15–0.54, P < .001). Silver sheet treatment was also associated with more rapid time to healing compared to treatment with a silver cream (HR 2.64, CI 1.01–6.89, P = .047). Most pediatric treadmill burns can be managed successfully with a nonoperative approach. More research is needed to confirm the superiority of treatment with silver sheets compared to treatment with silver creams.

scholarly journals The validation study on a three-dimensional burn estimation smart-phone application: accurate, free and fast?

2018 ◽  
Vol 6 ◽  
Author(s):  
A. K. W. Cheah ◽  
T. Kangkorn ◽  
E. H. Tan ◽  
M. L. Loo ◽  
S. J. Chong
Keyword(s):  
Surface Area ◽  
Body Surface Area ◽  
Body Surface ◽  
Validation Study ◽  
Total Body Surface Area ◽  
Three Dimensional ◽  
Smart Phone ◽  
Conventional Methods ◽  
Total Body ◽  
Smart Phone Application

Abstract Background Accurate total body surface area burned (TBSAB) estimation is a crucial aspect of early burn management. It helps guide resuscitation and is essential in the calculation of fluid requirements. Conventional methods of estimation can often lead to large discrepancies in burn percentage estimation. We aim to compare a new method of TBSAB estimation using a three-dimensional smart-phone application named 3D Burn Resuscitation (3D Burn) against conventional methods of estimation—Rule of Palm, Rule of Nines and the Lund and Browder chart. Methods Three volunteer subjects were moulaged with simulated burn injuries of 25%, 30% and 35% total body surface area (TBSA), respectively. Various healthcare workers were invited to use both the 3D Burn application as well as the conventional methods stated above to estimate the volunteer subjects’ burn percentages. Results Collective relative estimations across the groups showed that when used, the Rule of Palm, Rule of Nines and the Lund and Browder chart all over-estimated burns area by an average of 10.6%, 19.7%, and 8.3% TBSA, respectively, while the 3D Burn application under-estimated burns by an average of 1.9%. There was a statistically significant difference between the 3D Burn application estimations versus all three other modalities (p < 0.05). Time of using the application was found to be significantly longer than traditional methods of estimation. Conclusions The 3D Burn application, although slower, allowed more accurate TBSAB measurements when compared to conventional methods. The validation study has shown that the 3D Burn application is useful in improving the accuracy of TBSAB measurement. Further studies are warranted, and there are plans to repeat the above study in a different centre overseas as part of a multi-centre study, with a view of progressing to a prospective study that compares the accuracy of the 3D Burn application against conventional methods on actual burn patients.

Sign in / Sign up

Export Citation Format

Share Document