scholarly journals Blood flow synchronization in renal microcirculation - a high-resolution imaging study.

2021 ◽  
Author(s):  
Dmitry D Postnov ◽  
Donald Marsh ◽  
Will Cupples ◽  
Niels-Henrik Holstein-Rathlou ◽  
Olga Sosnovtseva

Aims: internephron signalling and interaction are fundamental for kidney function. Earlier studies have shown that nephrons signal to each other over short distances and adjust their activity accordingly. Micropuncture experiments revealed synchronous clusters of 2-3 nephrons formed from such interactions, while imaging and modelling results suggested the possibility of larger clusters. Such clusters are expected to play an important role in renal autoregulation, but their presence has not been confirmed and their size has not been estimated. In this study, we present methodology for high resolution renal blood flow imaging and apply it to estimate frequency and phase angle differences in kidney blood vessels under normal conditions and after administration of the vasoactive agents angiotensin II and acetylcholine. Methods and results: to resolve signals from separate arterioles in a sufficiently large field of view, we developed a method for renal laser speckle contrast imaging. Our setup provides imaging of blood flow in the kidney cortex with a limit of image resolution at 0.8 micrometres per pixel and the imaging frequency of 160Hz. We used the method to record from ~1.5x1.5 mm2 sections of the renal surface in anaesthetised Sprague-Dawley rats in unstimulated conditions and during IV infusion of the vasoconstrictor angiotensin II or the vasodilator acetylcholine. In each section, we resolved and segmented 94.8+-15.66 individual arterioles and venules, and analyzed blood flow using wavelet spectral analysis to identify clusters of synchronized blood vessels. Conclusions: we observed spatial and temporal evolution of blood vessel clusters of various sizes, including the formation of large (>90 vessels) long-lived clusters (>10 periods) locked at the frequency of the tubular glomerular feedback (TGF) mechanism. The analysis showed that synchronization patterns and thus the co-operative dynamics of nephrons change significantly when either of the vasoactive agents is administered. On average, synchronization was stronger (larger clusters, longer duration) with angiotensin II administration than in the unstimulated state or with acetyl choline. While it weakens with distance, increased synchronization duration spanned the whole field of view, and likely, beyond it. Neighbouring vessels tend to demonstrate in-phase synchronization, especially in the vasoconstricted condition, which is expected to cause locally increased pressure variation. Our results confirm both the presence of the local synchronization in the renal microcirculatory blood flow and the fact that it changes depending on the condition of the vascular network and the blood pressure, which might have further implications for the role of such synchronization in pathologies development.

2021 ◽  
Author(s):  
Ruixiao Li ◽  
Zeuku Ho ◽  
Xiaodong Gu ◽  
Satoshi Shinada ◽  
Fumio Koyama

2011 ◽  
Author(s):  
W. Li ◽  
J. Gelb ◽  
Y. Yang ◽  
Y. Guan ◽  
W. Wu ◽  
...  

2001 ◽  
Vol 19 (2) ◽  
pp. 285-293 ◽  
Author(s):  
T.A. PIKUZ ◽  
A. YA. FAENOV ◽  
M. FRAENKEL ◽  
A. ZIGLER ◽  
F. FLORA ◽  
...  

The shadow monochromatic backlighting (SMB) scheme, a modification of the well-known soft X-ray monochromatic backlighting scheme, is proposed. It is based on a spherical crystal as the dispersive element and extends the traditional scheme by allowing one to work with a wide range of Bragg angles and thus in a wide spectral range. The advantages of the new scheme are demonstrated experimentally and supported numerically by ray-tracing simulations. In the experiments, the X-ray backlighter source is a laser-produced plasma, created by the interaction of an ultrashort pulse, Ti:Sapphire laser (120 fs, 3–5 mJ, 1016 W/cm2 on target) or a short wavelength XeCl laser (10 ns, 1–2 J, 1013 W/cm2 on target) with various solid targets (Dy, Ni + Cr, BaF2). In both experiments, the X-ray sources are well localized spatially (∼20 μm) and are spectrally tunable in a relatively wide wavelength range (λ = 8–15 Å). High quality monochromatic (δλ/λ ∼ 10−5–10−3) images with high spatial resolution (up to ∼4 μm) over a large field of view (a few square millimeters) were obtained. Utilization of spherically bent crystals to obtain high-resolution, large field, monochromatic images in a wide range of Bragg angles (35° < Θ < 90°) is demonstrated for the first time.


1971 ◽  
Vol 43 ◽  
pp. 24-29 ◽  
Author(s):  
J. V. Ramsay ◽  
R. G. Giovanelli ◽  
H. R. Gillett

The magnetograph is based on a high-resolution filter which serves in place of a spectrograph, except that a reasonably large field of view (one-quarter of the Sun's diameter) can be observed at the one instant. Observations are made by obtaining filtergrams of opposite circular polarizations simultaneously in the wing of a magnetically sensitive line. Exposure times are about 0.3 s, the angular resolution of the magnetic field is about 2 arc s, closest frame repetition rates about 8 s. The filtergrams are processed subsequently by photographic or television subtraction. Semiautomatic photographic and/or TV subtractions yield magnetograms suitable for cinematographic projection though the subtractions are not yet as perfect as those obtained by individual subtraction.


2008 ◽  
Author(s):  
Haitao Wang ◽  
Yongkai Zhu ◽  
Wantai Ma ◽  
Jiahui Cai ◽  
Yajing Zhang ◽  
...  

2019 ◽  
Vol 85 (11) ◽  
pp. 815-827 ◽  
Author(s):  
Mi Wang ◽  
Beibei Guo ◽  
Ying Zhu ◽  
Yufeng Cheng ◽  
Chenhui Nie

The Gaofen-1 (GF1) optical remote sensing satellite is the first in China's series of high-resolution civilian satellites and is equipped with four wide-field-of-view cameras. The cameras work together to obtain an image 800 km wide, with a resolution of 16 m, allowing GF1 to complete a global scan in four days. To achieve high-accuracy calibration of the wide-field-of-view cameras on GF1, the calibration field should have high resolution and broad coverage based on the traditional calibration method. In this study, a GF self-calibration scheme was developed. It uses partial reference calibration data covering the selected primary charge-coupled device to achieve high-accuracy calibration of the whole image. Based on the absolute constraint of the ground control points and the relative constraint of the tie points of stereoscopic images, we present two geometric calibration models based on paired stereoscopic images and three stereoscopic images for wide-field-of-view cameras on GF1, along with corresponding stepwise internal-parameter estimation methods. Our experimental results indicate that the internal relative accuracy can be guaranteed after calibration. This article provides a new approach that enables large-field-of-view optical satellites to achieve high-accuracy calibration based on partial calibration-field coverage.


Sensors ◽  
2020 ◽  
Vol 20 (4) ◽  
pp. 1027 ◽  
Author(s):  
Saad Abbasi ◽  
Kevan Bell ◽  
Parsin Haji Reza

Mechanical stages are routinely used to scan large expanses of biological specimens in photoacoustic imaging. This is primarily due to the limited field of view (FOV) provided by optical scanning. However, stage scanning becomes impractical at higher scanning speeds, or potentially unfeasible with heavier samples. Also, the slow scan-rate of the stages makes high resolution scanning a time-consuming process. Some clinical applications such as microsurgery require submicron resolution in a reflection-mode configuration necessitating a method that can acquire large field of views with a small raster scanning step size. In this study, we describe a method that combines mechanical stages with optical scanning for the rapid acquisition of high-resolution large FOVs. Optical scanning is used to acquire small frames in a two-dimensional grid formed by the mechanical stages. These frames are captured with specific overlap for effective image registration. Using a step size of 200 nm, we demonstrate mosaics of carbon fiber networks with FOVs of 0.8 × 0.8 mm2 captured in under 70 s with 1.2 µm image resolution. Larger mosaics yielding an imaging area of 3 × 3 mm2 are also shown. The method is validated by imaging a 1 × 1 mm2 section of unstained histopathological human tissue.


2014 ◽  
Vol 898 ◽  
pp. 614-617
Author(s):  
Rui Hong Li ◽  
Yue Ping Han

The present paper reviews the X-ray grating imaging systems at home and abroad from the aspects of technological characterizations and the newest researching focus. First, not only the imaging principles and the frameworks of the typical X-ray grating imaging system based on Talbot-Lau interferometry method, but also the algorithms of retrieving the signals of attenuation, refraction and small-angle scattering are introduced. Second, the system optimizing methods are discussed, which involves mainly the relaxing the requirement of high positioning resolution and strict circumstances for gratings and designing large field of view with high resolution. Third, two and four-dimensional grating-based X-ray imaging techniques are introduced.


Sign in / Sign up

Export Citation Format

Share Document