Interaction geometries and energies of hydrogen bonds to C=O and C=S acceptors: a comparative study

2008 ◽  
Vol 64 (4) ◽  
pp. 491-496 ◽  
Author(s):  
Peter A. Wood ◽  
Elna Pidcock ◽  
Frank H. Allen
Keyword(s):  
Hydrogen Bond ◽  
Hydrogen Bonds ◽  
Electron Delocalization ◽  
Interaction Energies ◽  
Thiourea Derivatives ◽  
Medium Strength ◽  
Geometrical Data ◽  
Structural Database ◽  
Intermolecular Perturbation Theory ◽  
Good Agreement

The occurrence, geometries and energies of hydrogen bonds from N—H and O—H donors to the S acceptors of thiourea derivatives, thioamides and thiones are compared with data for their O analogues – ureas, amides and ketones. Geometrical data derived from the Cambridge Structural Database indicate that hydrogen bonds to the C=S acceptors are much weaker than those to their C=O counterparts: van der Waals normalized hydrogen bonds to O are shorter than those to S by ∼ 0.25 Å. Further, the directionality of the approach of the hydrogen bond with respect to S, defined by the C=S...H angle, is in the range 102–109°, much lower than the analogous C=O...H angle which lies in the range 127–140°. Ab initio calculations using intermolecular perturbation theory show good agreement with the experimental results: the differences in hydrogen-bond directionality are closely reproduced, and the interaction energies of hydrogen bonds to S are consistently weaker than those to O, by ∼ 12 kJ mol−1, for each of the three compound classes. There are no CSD examples of hydrogen bonds to aliphatic thiones, (Csp 3)2C=S, consistent with the near-equality of the electronegativities of C and S. Thioureas and thioamides have electron-rich N substituents replacing the Csp 3 atoms. Electron delocalization involving C=S and the N lone pairs then induces a significant >Cδ+=Sδ− dipole, which enables the formation of the medium-strength C=S...H bonds observed in thioureas and thioamides.

Hydrogen bonds in N-(3-chloro-2-benzo[b]thienocarbonyl)- and N-(2-benzo[b]thienocarbonyl)-N'-monosubstituted thioureas

1987 ◽  
Vol 52 (11) ◽  
pp. 2673-2679 ◽  
Author(s):  
Oľga Hritzová ◽  
Peter Kutschy ◽  
Ján Imrich ◽  
Thomas Schöffmann
Keyword(s):  
Hydrogen Bond ◽  
Hydrogen Bonds ◽  
Strong Hydrogen Bond ◽  
Cyclic Form ◽  
Thiourea Derivatives

N-(3-Chloro-2-benzo[b]thienocarbonyl)-N'-monosubstituted thiourea derivatives undergo photocyclizations with lower yields than those obtained from analogous N',N'-disubstituted derivatives. This decreased reactivity is caused by the existence of a six-membered cyclic form with the very strong hydrogen bond NH···O=C. The possibility of formation of various conformers has been found with N-(2-benzo[b]thienocarbonyl)-N'-monosubstituted thiourea derivatives as a consequence of the rotation around the C(2)-C(O) connecting line.

Iodo-nitroarenesulfonamides: interplay of hard and soft hydrogen bonds, I...O interactions and aromatic π...π stacking interactions

2001 ◽  
Vol 58 (1) ◽  
pp. 94-108 ◽  
Author(s):  
Craig J. Kelly ◽  
Janet M. S. Skakle ◽  
James L. Wardell ◽  
Solange M. S. V. Wardell ◽  
John N. Low ◽  
...  
Keyword(s):  
Hydrogen Bond ◽  
Hydrogen Bonds ◽  
Three Dimensional ◽  
Stacking Interactions ◽  
Asymmetric Unit ◽  
Space Group ◽  
Rotation Axes ◽  
Π Stacking ◽  
Structural Database ◽  
A Chain

Molecules of N-(4′-iodophenylsulfonyl)-4-nitroaniline, 4-O2NC6H4NHSO2C6H4I-4′ (1), are linked by three-centre I...O2N interactions into chains and these chains are linked into a three-dimensional framework by C—H...O hydrogen bonds. In the isomeric N-(4′-nitrophenylsulfonyl)-4-iodoaniline, 4-IC6H4NHSO2C6H4NO2-4′ (2), the chains generated by the I...O2N interactions are again linked into a three-dimensional framework by C—H...O hydrogen bonds. Molecules of N,N-bis(3′-nitrophenylsulfonyl)-4-iodoaniline, 4-IC6H4N(SO2C6H4NO2-3′)2 (3), lie across twofold rotation axes in space group C2/c and they are linked into chains by paired I...O=S interactions: these chains are linked into sheets by a C—H...O hydrogen bond, and the sheets are linked into a three-dimensional framework by aromatic π...π stacking interactions. In N-(4′-iodophenylsulfonyl)-3-nitroaniline, 3-O2NC6H4NHSO2C6H4I-4′ (4), there are R^2_2(8) rings formed by hard N—H...O=S hydrogen bonds and R^2_2(24) rings formed by two-centre I...nitro interactions, which together generate a chain of fused rings: the combination of a C—H...O hydrogen bond and aromatic π...π stacking interactions links the chains into sheets. Molecules of N-(4′-iodophenylsulfonyl)-4-methyl-2-nitroaniline, 4-CH3-2-O2NC6H3NHSO2C6H4I-4′ (5), are linked by N—H...O=S and C—H...O(nitro) hydrogen bonds into a chain containing alternating R^2_2(8) and R^2_2(10) rings, but there are no I...O interactions of either type. There are two molecules in the asymmetric unit of N-(4′-iodophenylsulfonyl)-2-nitroaniline, 2-O2NC6H4NHSO2C6H4I-4′ (6), and the combination of an I...O=S interaction and a hard N—H...O(nitro) hydrogen bond links the two types of molecule to form a cyclic, centrosymmetric four-component aggregate. C—H...O hydrogen bonds link these four-molecule aggregates to form a molecular ladder. Comparisons are made with structures retrieved from the Cambridge Structural Database.

Five pseudopolymorphs of 6-amino-2-thiouracil: absence of N—H...S hydrogen bonds

2012 ◽  
Vol 69 (1) ◽  
pp. 93-100 ◽  
Author(s):  
Wilhelm Maximilian Hützler ◽  
Michael Bolte
Keyword(s):  
Hydrogen Bond ◽  
Hydrogen Bonding ◽  
Hydrogen Bonds ◽  
Cambridge Structural Database ◽  
Hydrogen Bonding Pattern ◽  
Crystallization Experiments ◽  
Structural Database ◽  
Thiouracil Derivatives

In order to study the preferred hydrogen-bonding pattern of 6-amino-2-thiouracil, C4H5N3OS, (I), crystallization experiments yielded five different pseudopolymorphs of (I), namely the dimethylformamide disolvate, C4H5N3OS·2C3H7NO, (Ia), the dimethylacetamide monosolvate, C4H5N3OS·C4H9NO, (Ib), the dimethylacetamide sesquisolvate, C4H5N3OS·1.5C4H9NO, (Ic), and two different 1-methylpyrrolidin-2-one sesquisolvates, C4H5N3OS·1.5C5H9NO, (Id) and (Ie). All structures containR21(6) N—H...O hydrogen-bond motifs. In the latter four structures, additionalR22(8) N—H...O hydrogen-bond motifs are present stabilizing homodimers of (I). No type of hydrogen bond other than N—H...O is observed. According to a search of the Cambridge Structural Database, most 2-thiouracil derivatives form homodimers stabilized by anR22(8) hydrogen-bonding pattern, with (i) only N—H...O, (ii) only N—H...S or (iii) alternating pairs of N—H...O and N—H...S hydrogen bonds.

Understanding distortions of inorganic substructures in chloridobismuthates(III)

2021 ◽  
Vol 77 (5) ◽  
Author(s):  
Maciej Bujak
Keyword(s):  
Hydrogen Bond ◽  
Hydrogen Bonds ◽  
Inorganic Anions ◽  
Cambridge Structural Database ◽  
Molar Ratio ◽  
Organic Cations ◽  
Hybrid Crystals ◽  
Structural Database ◽  
Distortion Parameters

The molar ratio variations of organic and inorganic reactants of chloridobismuthates(III) with N,N-dimethylethane-1,2-diammonium, [(CH3)2NH(CH2)2NH3]2+, and N,N,N′,N′-tetramethylguanidinium, [NH2C{N(CH3)2}2]+, cations lead to the formation of four different products, namely, tris(N,N-dimethylethane-1,2-diammonium) bis[hexachloridobismuthate(III)], [(CH3)2NH(CH2)2NH3]3[BiCl6]2 (1), catena-poly[N,N-dimethylethane-1,2-diammonium [[tetrachloridobismuthate(III)]-μ-chlorido]], {[(CH3)2NH(CH2)2NH3][BiCl5]} n (2), tris(N,N,N′,N′-tetramethylguanidinium) tri-μ-chlorido-bis[trichloridobismuthate(III)], [NH2C{N(CH3)2}2]3[Bi2Cl9] (3), and catena-poly[N,N,N′,N′-tetramethylguanidinium [[dichloridobismuthate(III)]-di-μ-chlorido]], {[NH2C{N(CH3)2}2][BiCl4]} n (4). The hybrid crystals 1–4, containing relatively large but different organic cations, are composed of four distinct anionic substructures. They are built up from isolated [BiCl6]3− octahedra in 1, from face-sharing bioctahedral [Bi2Cl9]3− units in 3, from polymeric corner-sharing {[BiCl5]2−} n chains in 2 and from edge-sharing {[BiCl4]−} n chains in 4. The distortions shown by the single [BiCl6]3− polyhedra in 1–4 are associated with intrinsic interactions within the anionic substructures and the organic...inorganic substructures interactions, namely, N/C—H...Cl hydrogen bonds. The first factor is the stronger, which is evident in comparison of the experimentally determined geometrical and calculated distortion parameters for the isolated octahedron in 1 to the more complex inorganic substructures in 2–4. The formation of N—H...Cl hydrogen bonds, in terms of their number and strength, is favoured for 1 and 3 containing relatively easily accessed hydrogen-bond acceptors of isolated [BiCl6]3− and [Bi2Cl9]3− units. The studies of the deviations from regularity of the [BiCl6]3− octahedra within inorganic substructures were supported by a survey of the Cambridge Structural Database, which confirmed the role played by different factors in the variations in geometry of the inorganic anions.

scholarly journals Isostructural Inorganic–Organic Piperazine-1,4-diium Chlorido- and Bromidoantimonate(III) Monohydrates: Octahedral Distortions and Hydrogen Bonds

Molecules ◽  
2020 ◽  
Vol 25 (6) ◽  
pp. 1361
Author(s):  
Maciej Bujak ◽  
Dawid Siodłak
Keyword(s):  
Hydrogen Bond ◽  
Hydrogen Bonds ◽  
Ligand Exchange ◽  
Structural Parameters ◽  
Monoclinic Space Group ◽  
X Ray Diffraction ◽  
Hydrogen Bond Interactions ◽  
Hybrid Crystals ◽  
Structural Database ◽  
Hydrogen Bonded Systems

Halogenidoantimonate(III) monohydrates of the (C4H12N2)[SbX5]·H2O (X = Cl, 1 or Br, 2) formula, crystallizing in the same monoclinic space group of P21/n, are isostructural, with an isostructurality index close to 99%. The single crystal X-ray diffraction data do not show any indication of phase transition in cooling these crystals from room temperature to 85 K. Both hybrid crystals are built up from [SbX6]3– octahedra that are joined together by a common edge forming isolated bioctahedral [Sb2X10]4– units, piperazine-1,4-diium (C4H12N2)2+ cations and water of crystallization molecules. These structural components are joined together by related but somewhat different O/N/C–H···X and N–H···O hydrogen bonded systems. The evolution of structural parameters, notably the secondary Sb–X bonds along with the associated X/Sb–Sb/X–X/Sb angles and O/N/C–H···X hydrogen bonds, as a function of ligand exchange and temperature, along with their influence on the irregularity of [SbX6]3– octahedra, was determined. The comparison of packing features and hydrogen bond parameters, additionally supported by the Hirshfeld surface analysis and data retrieved from the Cambridge Structural Database, demonstrates the hierarchy and importance of hydrogen bond interactions that influence the irregularity of single [SbX6]3– units.

Two newXP(O)[NHC(CH3)3]2phosphoramidates, withX= (CH3)2N and [(CH3)3CNH]2P(O)(O)

2012 ◽  
Vol 68 (4) ◽  
pp. o164-o169 ◽  
Author(s):  
Mehrdad Pourayoubi ◽  
Atekeh Tarahhomi ◽  
Fatemeh Karimi Ahmadabad ◽  
Karla Fejfarová ◽  
Arie van der Lee ◽  
...  
Keyword(s):  
Hydrogen Bond ◽  
Hydrogen Bonds ◽  
Cambridge Structural Database ◽  
Asymmetric Unit ◽  
Structural Database ◽  
Independent Molecules ◽  
Hydrogen Bond Patterns

InN,N′-di-tert-butyl-N′′,N′′-dimethylphosphoric triamide, C10H26N3OP, (I), andN,N′,N′′,N′′′-tetra-tert-butoxybis(phosphonic diamide), C16H40N4O3P2, (II), the extended structures are mediated by P(O)...(H—N)2interactions. The asymmetric unit of (I) consists of six independent molecules which aggregate through P(O)...(H—N)2hydrogen bonds, givingR21(6) loops and forming two independent chains parallel to theaaxis. Of the 12 independenttert-butyl groups, five are disordered over two different positions with occupancies ranging from 1 \over 6 to 5 \over 6. In the structure of (II), the asymmetric unit contains one molecule. P(O)...(H—N)2hydrogen bonds giveS(6) andR22(8) rings, and the molecules form extended chains parallel to thecaxis. The structures of (I) and (II), along with similar structures having (N)P(O)(NH)2and (NH)2P(O)(O)P(O)(NH)2skeletons extracted from the Cambridge Structural Database, are used to compare hydrogen-bond patterns in these families of phosphoramidates. The strengths of P(O)[...H—N]x(x= 1, 2 or 3) hydrogen bonds are also analysed, using these compounds and previously reported structures with (N)2P(O)(NH) and P(O)(NH)3fragments.

scholarly journals Crystal structure ofrac-4-[2-(tert-butylazaniumyl)-1-hydroxyethyl]-2-(hydroxymethyl)phenol benzoate

2017 ◽  
Vol 73 (9) ◽  
pp. 1333-1335
Author(s):  
Wenju Liu ◽  
Qiliang Chen ◽  
Linda Yu
Keyword(s):  
Crystal Structure ◽  
Hydrogen Bond ◽  
Hydrogen Bonds ◽  
Benzene Ring ◽  
Dihedral Angle ◽  
Hydroxy Group ◽  
Carboxyl Group ◽  
Medium Strength ◽  
Benzoate Anion

The title salt, C13H22NO3+·C7H5O2−, comprises one salbutamol cation {systematic name: 4-[2-(tert-butylazaniumyl)-1-hydroxyethyl]-2-(hydroxymethyl)phenol} and a benzoate anion. The cation shows disorder of the hydroxy group [occupancy ratio 0.738 (3):0.262 (3)] at the stereogenic C atom. The non-planar benzoate anion [the dihedral angle between the benzene ring and the carboxyl group is 11.30 (8)°] is linked to the salbutamol cation by a medium-strength O—H...O hydrogen bond. Other intermolecular O—H...O and N—H...O hydrogen bonds of weaker nature give rise to [001] chains.

Universal prediction of intramolecular hydrogen bonds in organic crystals

2010 ◽  
Vol 66 (2) ◽  
pp. 237-252 ◽  
Author(s):  
Peter T. A. Galek ◽  
László Fábián ◽  
Frank H. Allen
Keyword(s):  
Hydrogen Bond ◽  
Hydrogen Bonds ◽  
Probability Model ◽  
Organic Crystals ◽  
Intramolecular Hydrogen Bonds ◽  
Donor And Acceptor ◽  
Universal Prediction ◽  
Structural Database ◽  
Chemical Descriptors ◽  
Intramolecular Hydrogen

A complete exploration of intramolecular hydrogen bonds (IHBs) has been undertaken using a combination of statistical analyses of the Cambridge Structural Database and computation of ab initio interaction energies for prototypical hydrogen-bonded fragments. Notable correlations have been revealed between computed energies, hydrogen-bond geometries, donor and acceptor chemistry, and frequencies of occurrence. Significantly, we find that 95% of all observed IHBs correspond to the five-, six- or seven-membered rings. Our method to predict a propensity for hydrogen-bond occurrence in a crystal has been adapted for such IHBs, applying topological and chemical descriptors derived from our findings. In contrast to intermolecular hydrogen bonding, it is found that IHBs can be predicted across the complete chemical landscape from a single optimized probability model, which is presented. Predictivity of 85% has been obtained for generic organic structures, which can exceed 90% for discrete classes of IHB.

Hydrogen bonding at C=Se acceptors in selenoureas, selenoamides and selones

2016 ◽  
Vol 72 (3) ◽  
pp. 317-325 ◽  
Author(s):  
Dikima Bibelayi ◽  
Albert S. Lundemba ◽  
Frank H. Allen ◽  
Peter T. A. Galek ◽  
Juliette Pradon ◽  
...  
Keyword(s):  
Hydrogen Bond ◽  
Hydrogen Bonding ◽  
Hydrogen Bonds ◽  
Ab Initio ◽  
Crystal Engineering ◽  
Cambridge Structural Database ◽  
Bond Lengths ◽  
Partial Charges ◽  
Structural Database

In recent years there has been considerable interest in chalcogen and hydrogen bonding involving Se atoms, but a general understanding of their nature and behaviour has yet to emerge. In the present work, the hydrogen-bonding ability and nature of Se atoms in selenourea derivatives, selenoamides and selones has been explored using analysis of the Cambridge Structural Database andab initiocalculations. In the CSD there are 70 C=Se structures forming hydrogen bonds, all of them selenourea derivatives or selenoamides. Analysis of intramolecular geometries andab initiopartial charges show that this bonding stems from resonance-induced Cδ+=Seδ−dipoles, much like hydrogen bonding to C=S acceptors. C=Se acceptors are in many respects similar to C=S acceptors, with similar vdW-normalized hydrogen-bond lengths and calculated interaction strengths. The similarity between the C=S and C=Se acceptors for hydrogen bonding should inform and guide the use of C=Se in crystal engineering.

Extensive analysis of N—H...O hydrogen bonding in four classes of phosphorus compounds: a combined experimental and database study

2017 ◽  
Vol 73 (3) ◽  
pp. 287-297 ◽  
Author(s):  
Farahnaz Hamzehee ◽  
Mehrdad Pourayoubi ◽  
Marek Nečas ◽  
Duane Choquesillo-Lazarte
Keyword(s):  
Hydrogen Bond ◽  
Hydrogen Bonding ◽  
Hydrogen Bonds ◽  
Crystal Structures ◽  
Neutral Hydrogen ◽  
The Other ◽  
Phosphorus Compounds ◽  
Database Study ◽  
Extensive Analysis ◽  
Structural Database

The N—H...O hydrogen bond is the characteristic interaction in the crystal structures of N-benzyl-P-phenyl-N′-(p-tolyl)phosphonic diamide, C20H21N2OP or (C6H5)P(O)(NHCH2C6H5)(NHC6H4-p-CH3), (I), diphenylphosphinic 1-methylpropylamide, C16H20NOP or (C6H5)2P(O)[NHCH(CH3)(C2H5)], (II), (S)-1-phenylethylammonium N-[(S)-1-phenylethyl]phenylphosphonamidate, C8H12N+·C14H15NO2P− or [S-(C6H5)CH(CH3)NH3][(C6H5)P(O){S-NHCH(CH3)(C6H5)}(O)], (III), and (4-methylbenzyl)ammonium diphenylphosphinate, C8H12N+·C12H10O2P− or [4-CH3-C6H4CH2NH3][(C6H5)2P(O)(O)], (IV). This article focuses on the N—H...O hydrogen bonds by considering the structures of (I), (II), (III) and (IV), and reviewing their analogous compounds, including 43 (C)P(O)(N)2, 102 (C)2P(O)(N), 31 (C)P(O)(N)(O) and 96 (C)2P(O)(O) structures, deposited in the Cambridge Structural Database (CSD). For the structures with a (C)P(O)(N)2 segment, only neutral hydrogen bonds were found in the CSD. The other three classes of compounds included both neutral and `charge-assisted' hydrogen bonds, and the (C)2P(O)(O) structures were particularly noticeable for a high number of cation–anion compounds. The overall tendencies of N...O distances in neutral and cation–anion compounds were compared. The N—H...O hydrogen-bond angles were also analyzed for the four classes of phosphorus compounds.

Sign in / Sign up

Export Citation Format

Share Document