A priori bond-valence and bond-length calculations in rock-forming minerals

Within the framework of the bond-valence model, one may write equations describing the valence-sum rule and the loop rule in terms of the constituent bond valences. These are collectively called the network equations, and can be solved for a specific bond topology to calculate its a priori bond valences. A priori bond valences are the ideal values of bond strengths intrinsic to a given bond topology that depend strictly on the formal valences of the ion at each site in the structure, and the bond-topological characteristics of the structure (i.e. the ion connectivity). The a priori bond valences are calculated for selected rock-forming minerals, beginning with a simple example (magnesiochromite, = 1.379 bits per atom) and progressing through a series of gradually more complex minerals (grossular, diopside, forsterite, fluoro-phlogopite, phlogopite, fluoro-tremolite, tremolite, albite) to finish with epidote (= 4.187 bits per atom). The effects of weak bonds (hydrogen bonds, long Na+—O2− bonds) on the calculation of a priori bond valences and bond lengths are examined. For the selected set of minerals, a priori and observed bond valences and bond lengths scatter closely about the 1:1 line with an average deviation of 0.04 v.u. and 0.048 Å and maximum deviations of 0.16 v.u. and 0.620 Å. The scatter of the corresponding a priori and observed bond lengths is strongly a function of the Lewis acidity of the constituent cation. For cations of high Lewis acidity, the range of differences between the a priori and observed bond lengths is small, whereas for cations of low Lewis acidity, the range of differences between the a priori and observed bond lengths is large. These calculations allow assessment of the strain in a crystal structure and provide a way to examine the effect of bond topology on variation in observed bond lengths for the same ion-pair in different bond topologies.