Lean Six Sigma in higher education institutes: an Irish case study

2019 ◽  
Vol 10 (4) ◽  
pp. 948-974 ◽  
Author(s):  
Seamus J. O’Reilly ◽  
Joe Healy ◽  
Tom Murphy ◽  
Rónán Ó’Dubhghaill
Keyword(s):  
Higher Education ◽  
Six Sigma ◽  
Single Case ◽  
Lean Six Sigma ◽  
Research Approach ◽  
Content Type ◽  
Training Programmes ◽  
The Impact

Purpose This paper aims to contribute to a developing literature on continuous improvement (CI), enabled by Lean Six Sigma (LSS), in higher education institutions (HEIs). It reports on the key learning points arising from the initial steps taken by an Irish university on its CI journey. Design/methodology/approach A case study strategy was adopted following a participatory research approach. This approach supports reflexivity and also provides access to all relevant documentation and staff within the case university. Thematic analysis was supported by data reduction and display techniques. Findings The introduction of a LSS approach rather than a reliance on lean alone introduced a structured methodology (DMAIC) that supported simplification of a number of administrative processes. A number of specific improvements were achieved including: Cycle time and cost reduction; customer or employee satisfaction; and rework and error reduction. The findings support the importance of the Readiness Factors as identified by Antony (2014), with particular insight into the role of senior and middle management, the impact of training and deployment of expertise. Research limitations/implications This paper is based on an ongoing, longitudinal, empirical study of a single case study in Ireland. Originality/value This paper tracks the development of CI in a HEI in a longitudinal manner and adds to the emerging the literature in this area. The paper evaluates the role of management at various levels, analyses the use of LSS tools and techniques and evaluated the role of training and capacity building. Implications for Management are shared including: design and role of training programmes, role of champions at various organisational levels, including key functional areas and sustaining momentum.

Lean Six Sigma journey in a UK higher education institute: a case study

2018 ◽  
Vol 35 (2) ◽  
pp. 510-526 ◽  
Author(s):  
Jiju Antony ◽  
Abhijeet Ghadge ◽  
Stephanie A. Ashby ◽  
Elizabeth A. Cudney
Keyword(s):  
Higher Education ◽  
Six Sigma ◽  
Management Practices ◽  
Lean Six Sigma ◽  
Extensive Literature ◽  
Content Type ◽  
Efficiency And Effectiveness ◽  
Uk Higher Education ◽  
The Impact

Purpose The purpose of this paper is to explore the fundamental challenges and critical success factors in the development of a Lean Six Sigma (LSS) initiative within a UK higher education institute (HEI). The paper also illustrates examples of the types of projects completed and share some of the key lessons learned as part of the LSS journey. Design/methodology/approach The authors have initially carried out an extensive literature review on the application of LSS in higher education to understand the existing body of work carried out by other scholars in the field. This is followed by presenting a case study explaining how a HEI in the UK has embarked on its LSS journey as a process excellence methodology to improve the efficiency and effectiveness of core and supporting business processes. Findings There has been a clear lack of support and commitment from senior management in the sustainability of LSS within the case study organization. There was a general lack of understanding of the benefits of LSS in the higher education context and there is a lack of knowledge on the use of LSS tools for tackling process efficiency and effectiveness problems across the case study organization. Although a number of LSS projects were executed across finance, administrative, and human resources, as well as IT and library services, no projects were carried out for improving academic processes such as teaching effectiveness. Research limitations/implications As the case study is limited to one higher education institution (HEI), the findings of the study cannot be broadly generalized. Moreover, the paper does not report the findings of any strategic projects as most projects were carried out at the operational level. Originality/value This is possibly one of the first studies reporting project examples of LSS in a HEI. The results of the study can also be used to benchmark with similar studies in other HEIs to understand the impact of certain management practices of LSS.

scholarly journals Lean Six Sigma and marketing: a missed opportunity

2014 ◽  
Vol 63 (5) ◽  
pp. 665-674 ◽  
Author(s):  
Lara Chaplin ◽  
Simon T.J. O’Rourke
Keyword(s):  
Six Sigma ◽  
Single Case ◽  
Lean Six Sigma ◽  
Illustrative Case ◽  
Content Type ◽  
Marketing Function ◽  
Marketing Orientation ◽  
Csr Strategy ◽  
The Impact

Purpose – The purpose of this paper is to assess the current use being made of the sustainability message within business improvement activity and project justification within individual businesses. Design/methodology/approach – This is a reflective paper that looks at an illustrative case study against the wider perspectives of Lean Six Sigma (LSS) implementation, market orientation and business improvement initiatives in general. Findings – The piece discusses the gains derived from the LSS projects and identifies gaps in potential benefits in particular the paper questions how well any potential marketing messages were exploited by the organisation. The findings critically evaluates the impact that marketing function involvement could have in helping to promote the wider productivity message and its contribution to the wider corporate social responsibility (CSR) strategy for the organisation. The document also suggests how the company could leverage internally focused projects to adopt a companywide marketing orientation and use such leverage to support future LSS project selection and justification. Research limitations/implications – The observations are limited to a single case study, although tempered by the authors’ wider experience. Further empirical research is required to validate the observations and conclusions. Practical implications – The proposed approach to future improvement initiatives can help to increase the wider productivity message and assist organisations to exploit their internal projects in external communications and wider CSR strategy. Originality/value – The paper proposes an approach that can be used to widen organisational involvement in improvement initiatives allowing future project justification to be less internally cost focused, more holistic with a focus on customer voice.

Lean Six Sigma strategy in telecom manufacturing

2014 ◽  
Vol 114 (6) ◽  
pp. 904-921 ◽  
Author(s):  
Roy Andersson ◽  
Per Hilletofth ◽  
Peter Manfredsson ◽  
Olli-Pekka Hilmola
Keyword(s):  
Supply Chain ◽  
Six Sigma ◽  
Single Case ◽  
Lean Six Sigma ◽  
Content Type ◽  
Strategic Emphasis ◽  
Company Culture ◽  
Difficult Times ◽  
Practical Implications

Purpose – The purpose of this paper is to elaborate, how the use of a joint-use strategy of Lean and Six Sigma can improve flexibility, robustness, and agility. Telecom manufacturing has been under tremendous change after dot.com bubble burst in the early 2000, and new competition has originated from Asia. Being successful requires now more than before, and joint-use of strategies is one option to survive. Design/methodology/approach – A single case study from a Swedish company operating in the telecom manufacturing was conducted. In particular, a Six Sigma project was followed and analyzed during 2002. However, the outcome of the Six Sigma project has been studied in longitudinal manner until 2014. Findings – The Lean Six Sigma strategy ensures flexible, robust, and efficient processes. However, to make them more agile in order to sustain in today's highly competitive environment, something more is required. This could include staff training, strengthening company culture and collaborating with key partners in the supply chain. Research limitations/implications – This study is limited to large company that usually has a lot of resources and choices where to put the strategic emphasis as well as has level of control of the supply chain operations. The situation could be very different in small and medium-sized companies and thus it may be more difficult to realize the Lean Six Sigma strategy in such environment. On the other hand, the processes in these companies are often less complex. Practical implications – This research provides guidance on how to manage the Lean Six Sigma strategy in order to ensure more flexible, robust, and efficient processes as well as how to perform a Six Sigma project in Lean environment, in a proper manner. Originality/value – This research provides guidance to companies regarding the applicability and properties of the Lean Six Sigma strategy. The paper will also serve as a basis for other companies and industries, on how to survive in difficult times.

Lean Six Sigma in policing services

2018 ◽  
Vol 67 (5) ◽  
pp. 935-940 ◽  
Author(s):  
Jiju Antony ◽  
Bryan Rodgers ◽  
Inness Coull ◽  
Vijaya Sunder M.
Keyword(s):  
Six Sigma ◽  
Design Methodology ◽  
Single Case ◽  
Lean Six Sigma ◽  
Single Case Study ◽  
Content Type ◽  
The Public ◽  
Study Approach ◽  
Learning Points

Purpose This paper is based on a single case study carried out as part of a change programme but is used as a reflective tool to draw on some of the wider organisational learning which can be considered when implementing, reviewing or re-energise a Lean Six Sigma (LSS) Programme. The paper aims to discuss this issue. Design/methodology/approach A case study approach has been used and referenced throughout the paper with references to literature to support the wider learning points drawn which are then applied to any continuous improvement (CI) programmes. Findings The paper presents a range of learning points which are drawn from a successful deployment of LSS within a change project carried out as part of an overall programme in Scottish policing services. Research limitations/implications The points are drawn from a single case study which was deployed within a wider change programme and is supported by wider literature but is used as a vehicle for informing strategic considerations within an organisation. Originality/value This case study is drawn from policing services in the public sector which alone is an area that has not been significantly studied. It is used to explore wider implications in terms of strategic alignment, organisational performance and project management and presents the argument that the design of a CI programme is much wider than the implementation of LSS itself.

How to use lean Six Sigma methodology to improve service process in higher education

2019 ◽  
Vol 10 (4) ◽  
pp. 883-908
Author(s):  
Na Li ◽  
Chad Matthew Laux ◽  
Jiju Antony
Keyword(s):  
Higher Education ◽  
Literature Review ◽  
Six Sigma ◽  
Lean Six Sigma ◽  
Service Process ◽  
Bottom Line ◽  
Content Type ◽  
Root Cause ◽  
Lessons Learnt

Purpose The purpose of this paper is to use a practical case study approach to demonstrate the power to use lean Six Sigma (LSS) to improve service process in a higher education institution (HEI). The paper also illustrated the barriers and challenges met and lessons learnt for the LSS adoption in this HEI. Design/methodology/approach Prior to the study, extensive literature review was conducted to understand various aspects of LSS in HE industry. The authors use a single descriptive case study as methodology to explain how DMAIC was applied within a HEI environment. Findings In this LSS case study, the team found HEI service process contains a large human behavior component, which dramatically increases the unpredictability of the entire service delivery process and increases the complexity of the process and the ability of the improvement team to identify the root cause. This case study demonstrates the numerous challenges will occur in working with the intangible factors that are both hard to recognize, quantify and rarely tracked by organization. Practical implications During the research, the pre-award service process was studied, data were recorded and various statistical tool and techniques were used to discover and resolve the root cause. The lessons learnt of the LSS adoption in this service process in HEI and the problems encountered were all recorded in this study, which will be helpful for future research in HEI industry. Originality/value From the literature review, LSS has been widely adopted in manufacturing industry, increased adoption in service, but there has been limited academic research about the implementation in nonprofit, service sectors, particular to higher education industry. The major benefit of implementation LSS in both manufacturing and service is considerable improvement to the bottom line. However, in this HEI case study, it has opened up the direction to implement LSS to better serve your customer as ultimate mission instead of financial gains.

Application of Lean Six Sigma in conservative dentistry: an action research at an Indian dental college

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ajay Noronha ◽  
Shreeranga Bhat ◽  
E.V. Gijo ◽  
Jiju Antony ◽  
Suma Bhat
Keyword(s):  
Action Research ◽  
Six Sigma ◽  
Single Case ◽  
Lean Six Sigma ◽  
Lessons Learned ◽  
Healthcare Sector ◽  
Content Type ◽  
Conservative Dentistry ◽  
Tools And Techniques

PurposeThe article evaluates the obstacles, lessons learned and managerial implications of deploying Lean Six Sigma (LSS) in a dental college hospital in India.Design/methodology/approachThe work adopts the action research (AR) methodology to establish a case study, which is carried out using the LSS define–measure–analyze–improve–control (DAMIC) approach in a dental college. It uses LSS tools to enhance the productivity and performance of the Conservative Dentistry Department of a dental college and to unravel the obstacles and success factors in applying it to the education and healthcare sector together.FindingsThe root cause for high turn-around time (TAT) is ascertained using LSS tools and techniques. The effective deployment of the solutions to the root causes of variation assists the dental college to reduce the TAT of the Conservative Dentistry process from an average of 63.9 min–36.5 min (i.e. 42.9% improvement), and the process Standard Deviation (SD) was reduced from 2.63 to 2 min. This, in turn, raises the sigma level from 0.48 to 3.23, a noteworthy successful story for this dental college.Research limitations/implicationsWhile the results and recommendations of this research are focused on a single case study, it is to be noted that the case study is carried out with new users of LSS tools and techniques, especially with the assistance of interns. This indicates the applicability of LSS in dental colleges; thus, the adopted modality can be further refined to fit India's education and hospital sector together.Originality/valueThis article explains the implementation of LSS from an aspiring user viewpoint to assist dental colleges and policymakers in improving competitiveness. In addition, the medical education sector can introduce an LSS course in the existing programme to leverage the potential of this methodology to bring synergy and collaborative research between data-based thinking and the medical field based on the findings of this study. The most important contribution of this article is the illustration of the design of experiments (DOE) in the dental college process.

Lean Six Sigma and Assurance of Learning (AoL) in higher education: a case study

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Iman Adeinat ◽  
Naseem Al Rahahleh ◽  
Tameem Al Bassam
Keyword(s):  
Higher Education ◽  
Curriculum Design ◽  
Six Sigma ◽  
Lean Six Sigma ◽  
Lessons Learned ◽  
Content Type ◽  
Team Members ◽  
Institutional Goals ◽  
Assurance Of Learning

PurposeThis study aims to present a case study using a Lean Six Sigma (LSS) process to manage the Assurance of Learning (AoL) process in higher education. The case study highlights the value that LSS can bring to the higher education context in respect to making the AoL process more efficient and more effective. The article also illustrates lessons learned in relation to adopting LSS in higher education institutes (HEIs).Design/methodology/approachThe case study presented is part of a larger undertaking implemented by the Faculty of Economics and Administration (FEA) at King Abdulaziz University in Saudi Arabia to improve its curricula for all its programs as the graduate and undergraduate level in line with the 2013 Association to Advance Collegiate Schools of Business standards. The FEA project team implemented the AoL process using an LSS methodology – define–measure–analyze–improve–control (DMAIC).FindingsThe experience of the FEA as described in the case study suggests that the DMAIC framework can be very useful in managing the AoL process. Three aspects of LSS used in the AoL context are identified as critical in ensuring that the process achieves its stated institutional goals. Firstly, it is necessary to clearly identify which team members have which areas of responsibility in relation to, for example, sponsoring, implementing, managing and monitoring the project. Secondly, the common language provided by LSS is essential to fostering collaboration among members of a cross-disciplinary team. Lastly, quantifiable priorities should be identified.Research limitations/implicationsThe experience of the FEA as described in the case study suggests that the DMAIC framework can be very effective in advancing and managing the AoL process. For example, writing the project charter, mapping the process using the suppliers, inputs, process, outputs, customers model and using various LSS tools and techniques to measure and control the assessment were critical to improving the AoL process.Practical implicationsThis paper provides a guide to the range of practices cited in the literature on implementing LSS in relation to AoL as a comprehensive means of assessing, evaluating and improving curriculum design and delivery. The importance of this process to accreditation is explored and recommendations are offered focused on realizing both short- and long-term benefits through the initial assessments and subsequent iterations.Originality/valueThe defining contribution of this paper to the literature is its consideration of LSS implementation in the HEI context through the development and management of the AoL process.

A relational view of start-up firms inside an incubator: the case of the ARCA consortium

2018 ◽  
Vol 21 (4) ◽  
pp. 601-619 ◽  
Author(s):  
Davide Di Fatta ◽  
Francesco Caputo ◽  
Gandolfo Dominici
Keyword(s):  
Design Methodology ◽  
Single Case ◽  
Research Approach ◽  
Short Term ◽  
Collaborative Relationships ◽  
Content Type ◽  
Start Up

Purpose Analyzing the entrepreneurial ecosystem related to the ARCA consortium, the purpose of this paper is to study the relationships among the start-up firms inside an incubator. Design/methodology/approach Thanks to the adoption of the relationships concentric model and the density concentric model, the paper highlights the role of relational conditions for innovative projects in partnership among the incubated firms. Reflections herein are tested via a qualitative research approach based on a single case study: the ARCA consortium. Findings This research found that about 32 percent of relationships inside the incubator support the emergence of short-term relationships among the incubated firms. Furthermore, about 18 percent of the relationships support the emergence of strong collaborative strategies for the implementation of long-term relationships resulting in innovative pathways: innovative projects in partnership. Originality/value The most interconnected firms inside the incubator are those that play a central role also in the innovation pathway developing the higher number of innovative project in partnership. This finding emphasizes a correlation between collaborative relationships and innovation inside an incubator ecosystem.

Application of Lean Six Sigma in IT support services – a case study

2019 ◽  
Vol 31 (3) ◽  
pp. 417-435 ◽  
Author(s):  
Gijo E.V. ◽  
Jiju Antony ◽  
Vijaya Sunder M.
Keyword(s):  
Support Services ◽  
Six Sigma ◽  
Lean Six Sigma ◽  
Resolution Time ◽  
Manufacturing Firm ◽  
Content Type ◽  
It Support ◽  
System Maintenance ◽  
The Impact

Purpose Lean Six Sigma (LSS) has been accepted globally across the service sector as a management strategy for achieving process excellence. In the past one decade, the application and success of LSS in services is remarkable across Information Technology (IT) organisations. However academic research has seldom derived implications from this practitioner’s science of improving processes. The purpose of this paper is to feature the application of LSS in the system maintenance department of a manufacturing firm. Design/methodology/approach The research reported in this paper is based on a case study carried out in system maintenance department using the Six Sigma Define-Measure-Analyse-Improve-Control (DMAIC) approach and its application in reducing complaint resolution time. Findings The LSS article presented here highlights a real-world case study of how LSS DMAIC methodology help reduce the complaint resolution time from 12.5 to 8.5 h (~30 per cent improvement) and the corresponding standard deviation from 28 to 17.4 days. This study also has resulted in reducing the turn-around-time of all the core processes in the organisation. The indirect financial savings estimated as a result of this overall impact was around INR2.5m. Research limitations/implications The research was restricted to studying the impact of LSS in one organisation. The validity of the results can be improved by including more organisations and more case studies from the IT support services. Originality/value This could serve as a resource for both practitioners to derive useful implications and to academicians as it contributes to the LSS body of knowledge towards theory testing.

Lean Six Sigma in higher education institutions

2016 ◽  
Vol 8 (2) ◽  
pp. 159-178 ◽  
Author(s):  
M. Vijaya Sunder
Keyword(s):  
Higher Education ◽  
Real Time ◽  
Education System ◽  
Six Sigma ◽  
Service Sector ◽  
Higher Education Institutions ◽  
Lean Six Sigma ◽  
Content Type ◽  
Higher Education System

Purpose This paper aims to illustrate the application of Lean Six Sigma (LSS) in higher education institutions (HEIs). A real-time case study presented as part of the paper highlights the value which LSS can bring to the higher education system. Design/methodology/approach The paper commences with an overview and the success of the LSS methodology. The uniqueness of the higher education system for imbibing quality excellence is elaborated, comparing it with the manufacturing industry. Various opportunities for LSS projects in HEIs are then discussed as part of the paper. The last section of the paper elaborates a real-time case study, explaining how LSS was leveraged to improve a university library process. Findings The study identified the key attributes of the higher education system, which need to be understood for imbibing quality excellence. The study also provided an insight into the upcoming application of LSS and the benefits it can bring to HEIs. Practical implications The introduction of LSS into the higher education setup could bring multifold organizational and social benefits Originality/value LSS has been successful in the past few decades in the manufacturing and service sector. However, its application in HEIs was very nascent. This study illustrates its importance and application to a highly responsible area of the service sector, for imbibing quality excellence, serving as an excellent resource for researchers and higher education professionals.

Sign in / Sign up

Export Citation Format

Share Document