Environmental sustainability features in large university campuses

2019 ◽  
Vol 20 (2) ◽  
pp. 214-228 ◽  
Author(s):  
Hani Abu Qdais ◽  
Osama Saadeh ◽  
Mohamad Al-Widyan ◽  
Raed Al-tal ◽  
Muna Abu-Dalo
Keyword(s):  
Solid Waste ◽  
Water Consumption ◽  
Carbon Emission ◽  
University Campus ◽  
Waste Generation ◽  
Content Type ◽  
University Campuses ◽  
Solid Waste Generation ◽  
Per Capita ◽  
The University

Purpose The purpose of this study is to describe the efforts undertaken to convert the large university campus of Jordan University of Science and Technology (JUST) into a green, resource-efficient and low-carbon campus by following an action-oriented strategy. Sustainability features of the campus were discussed and benchmarked. Challenges were identified and remedial actions were proposed. Design/methodology/approach Taking 2015 as the baseline year, data on energy, water consumption and solid waste generation for the university campus were collected. Energy consumption for cooling, heating and transportation, besides electric power consumption, were reported, and the associated carbon dioxide (CO2) emissions were estimated. By calculating the full time equivalent of students and employees, carbon emission and water consumption per capita were calculated. A comparison with other universities worldwide was conducted. Findings Although located in a semiarid region with scarce water resources, JUST has set an example by greening its campus through an action-oriented approach. It was found that the per capita carbon emission for JUST campus was 1.33 ton of CO2 equivalent, which is less than the emissions from campuses of other universities worldwide. As for water, this study revealed that the daily per capita water consumption was about 56 L, which is approximately one-third of that for students in institutions in the USA. Furthermore, the findings of this study indicated that the average solid waste generation rate was 0.37 kg per student per day compared to 0.31 kg per capita per day when considering the university community (students and employees) collectively. These figures were less and thus compare favorably to the corresponding data for other universities in both developing and developed countries. Originality/value This research addresses the issue of greening JUST campus, which is one of the largest university campuses in the world. JUST campus is located in a semiarid, water-scarce country, which on its own poses a serious challenge. The originality and value of this study mainly stem from the facts that on the one hand, this is one of the unique and pioneering comprehensive studies of its type and, on the other hand, other universities with similar conditions can benefit from the findings of this research to meet the sustainability objectives on their campus operations.

Assessment of solid waste management practice in the university campus

2021 ◽  
Vol 22 (3) ◽  
pp. 561-575
Author(s):  
Saad Dahlawi ◽  
Mahmoud F. El Sharkawy
Keyword(s):  
Waste Management ◽  
Solid Waste ◽  
Management Practices ◽  
Solid Waste Management ◽  
Management Practice ◽  
Chemical Properties ◽  
Management Program ◽  
University Campus ◽  
Content Type ◽  
The University

Purpose Municipal solid waste (MSW) consists mainly of several recyclable materials such as paper and cardboard. Inside the educational institutes, especially universities, MSW is generated from several facilities including offices and cafeterias. Without an effective management program, solid waste can have detrimental impacts on the environment. This paper aims to assess the solid waste management practices followed at the main campus of Imam Abdulrahman Bin Faisal University (IAU), Dammam – Saudi Arabia. Design/methodology/approach The MSW samples were collected from different sources inside the IAU campus such as the college buildings (such as the teaching rooms and staff offices), the administrative buildings and services buildings (e.g. the main library, the photocopying center, the restaurant and cafeteria) at least one time per week during a full academic term (January–May) of the academic year 2017–2018. The collected MSW samples were segregated into seven categories, and the net amount of each category and the overall weight of the MSW were determined once every week. The MSW samples were characterized for physical and chemical properties including moisture, carbon and ash contents. Food product waste (FPW) of the main university restaurant was studied separately. Findings Data on the composition of MSW samples revealed that 80% of wastes were recyclable, 19% as compostable materials, while only 1% of the materials were a non-recyclable waste. More than 73% of the recyclable materials include paper and plastic warranting dire need of an effective solid waste management program. The highest value of FPW was recorded for the breakfast meal. Originality/value Most of the waste generated from the university campus was recyclable type that needs to be handled carefully to avoid its mixing with other types of the waste stream. Waste characterization is an important tool that helps in understanding the amount and pattern of waste generation. It can be used as a decision-making tool for implementing sustainable waste management programs for universities.

Municipal solid waste generation, composition, and management: the global scenario

2020 ◽  
Vol 16 (6) ◽  
pp. 917-948
Author(s):  
Kapil Dev Sharma ◽  
Siddharth Jain
Keyword(s):  
Waste Management ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Solid Waste Management ◽  
Management Strategies ◽  
Technology Selection ◽  
Waste Generation ◽  
Content Type ◽  
The World ◽  
Solid Waste Generation

Purpose Due to the increasing population and prosperity, the generation rate of municipal solid waste (MSW) has increased significantly, resulting in serious problems on public health and the environment. Every single person in the world is affected by the municipal solid waste management (MSWM) issue. MSWM is reaching a critical level in almost all areas of the world and seeking the development of MSW strategies for a sustainable environment. This paper aims to present the existing global status of MSW generation, composition, management and related problems. Design/methodology/approach A total of 59 developed and developing countries have been grouped based on their gross national income to compare the status of various MSWM technologies among them. A total of 19 selection criteria have been discussed to select appropriate MSWM technology(s) for a city/town, which affects their applicability, operational suitability and performance. All risks and challenges arising during the life cycle of the waste to energy (WtE) project have also been discussed. This paper also gives a comparative overview of different globally accepted MSWM technologies and the present market growth of all WtE technologies. Findings It was found that most developed countries have effectively implemented the solid waste management (SWM) hierarchy and are now focusing heavily on reducing, reusing and recycling of MSW. On the other hand, SWM has become very serious in low-income and low-middle-income countries because most of the MSW openly dumps and most countries are dependent on inadequate waste infrastructure and the informal sector. There are also some other major challenges related to effective waste policies, availability of funds, appropriate technology selection and adequacy of trained people. This study clears the picture of MSW generation, composition, management strategies and policies at the worldwide context. This manuscript could be valuable for all nations around the world where effective MSWM has not yet been implemented. Originality/value This study clears the picture of solid waste generation, composition, management strategies and policies at the worldwide context. This manuscript could be valuable for all nations around the world where effective MSWM has not yet been implemented. In this study, no data was generated. All supporting data were obtained from previously published papers in journals, the outcomes of the international conferences and published reports by government organizations.

How can ecological fairs increase sustainability in a university campus?

2019 ◽  
Vol 20 (3) ◽  
pp. 515-529
Author(s):  
Luciana Londero Brandli ◽  
Amanda Lange Salvia ◽  
Leila Dal Moro ◽  
Vanessa Tibola da Rocha ◽  
Janaina Mazutti ◽  
...  
Keyword(s):  
Local Community ◽  
Social Economic ◽  
University Campus ◽  
Content Type ◽  
University Campuses ◽  
The Social ◽  
Short Period ◽  
The University ◽  
Practical Implications

Purpose This paper aims to highlight the contribution of ecological fairs to the promotion of sustainability in university campuses, based on a case study carried out at the University of Passo Fundo, located in Southern Brazil. Design/methodology/approach Producers and consumers of the ecological fairs were interviewed to analyse how the social, economic and environmental spheres of sustainable development are impacted by these fairs. In total, 24 interviews were conducted. Findings The results showed how fairs positively impact the academic and local community while bringing sustainability into university campuses. Research limitations/implications The main limitations of this study were the number of interviews and the short period during when the study was conducted. Practical implications This case study demonstrated how the promotion of ecological fairs on a university campus plays an important role in the implementation and practice of sustainability and can serve as an example for other institutions that intend to work on similar projects. Originality/value This paper contributes to the literature by providing a discussion on how ecological fairs represent a good addition in the process of universities to become more sustainable and which aspects of each sustainability sphere are involved.

scholarly journals Solid waste characterization and reducing potential at Faculty of Engineering, University of Surabaya

2021 ◽  
Vol 896 (1) ◽  
pp. 012032
Author(s):  
T L Simangunsong
Keyword(s):  
Solid Waste ◽  
Food Waste ◽  
Food Packaging ◽  
Waste Generation ◽  
Study Results ◽  
Solid Waste Generation ◽  
Waste Characteristics ◽  
Green Campus ◽  
The University ◽  
Reducing Potential

Abstract Reducing solid waste generation is one of the green campus achievement programs at the University of Surabaya (Ubaya). It is essential to determine the quantity and composition of all faculty’s solid waste generation. The Faculty of Engineering significantly contributes to the amount of waste generation in Ubaya. Research related to the Faculty of Engineering solid waste characteristics needs to be conducted. The purposes of the study were estimating the quantity of solid waste generation and observing the composition of solid waste at the Faculty of Engineering. The method of this research was a survey of waste generation. The estimation of waste generation was taken for 12 (twelve) days during April 2018. The study results showed that the average solid waste generation faculty of engineering was to be 19.26 kg/day, and the percentage of solid waste was found to be food waste 27%, plastic 25.8%, food packaging 17.6%, Paper 9.8%, and Residue 19.8%.

Status of municipal solid waste generation and disposal in Nigeria

2015 ◽  
Vol 26 (1) ◽  
pp. 53-71 ◽  
Author(s):  
Charles Chidozie Nnaji
Keyword(s):  
Heavy Metals ◽  
Waste Management ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Solid Waste Management ◽  
Municipal Solid Waste Management ◽  
Waste Generation ◽  
Content Type ◽  
Municipal Waste Management ◽  
Solid Waste Generation

Purpose – This paper examined the current status of municipal solid waste management across Nigeria. The core aspects covered are generation, characterization, collection, scavenging, open dumping, disposal and environmental implications of poor solid waste management. The purpose of this paper is to present a comprehensive overview of the current state of municipal solid waste management in Nigeria. Design/methodology/approach – This study was executed by a combination of an extensive literature search and field study. Solid waste generation rates for 31 Nigerian cities were obtained from literature. In addition, characteristics of municipal solid waste from 26 Nigerian cities were also obtained from literature. Other aspects such as characterization of solid waste obtained from final dumpsite and heavy metals accumulation in solid waste dumpsites were undertaken first hand. Findings – Solid waste generation rate was found to vary from 0.13 kg/capita/day in Ogbomosho to 0.71 kg/capita/day in Ado-Ekiti. Factors affecting solid waste generation rates were identified. Typically, food waste was found to constitute close to 50 percent of overall municipal solid waste in Nigerian cities. This study shows that the rate of generation of plastics, water proof materials and diapers has assumed an upward trend. Due to the dysfunctional state of many municipal waste management authorities, many cities have been overrun by open dumps. For instance, more than 50 percent of residents of Maiduguri in northern Nigeria and Ughelli in southern Nigeria dispose of their waste in open dumps. Indiscriminate disposal of waste has also resulted in the preponderance of toxic heavy metals in agricultural soils and consequent bioaccumulation in plants as well as groundwater contamination. Research limitations/implications – The main limitation of this research is municipal waste management authorities do not have relevant data. Hence, there was heavy reliance on published materials. The status of waste management in Nigeria is very deplorable and therefore poses serious threats to public and environmental health. There is urgent need for both government and individuals to adopt holistic and sustainable waste management strategies in order to safeguard public/environmental health. Practical implications – Findings from this paper can form a veritable resource for the formulation and implementation of sustainable municipal solid waste management framework and strategies in Nigeria. Originality/value – While most studies on municipal solid waste management in Nigeria are focussed on selected cities of interest, this particular study cuts across most cities of Nigeria in order to present a broader and holistic view of municipal solid waste management in Nigeria. The paper has also unraveled core municipal solid waste management challenges facing Nigerian cities.

Sign in / Sign up

Export Citation Format

Share Document