Effectiveness of damaged fireproofing in structural steel members subjected to fire

2019 ◽  
Vol 10 (1) ◽  
pp. 24-47 ◽  
Author(s):  
Ataollah Taghipour Anvari ◽  
Mustafa Mahamid ◽  
Michael McNallan ◽  
Mohammadreza Eslami
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Structural Steel ◽  
Fire Resistance ◽  
Fire Protection ◽  
Steel Beams ◽  
Element Analysis ◽  
Content Type ◽  
Steel Members ◽  
Resistance Reduction

Purpose The purpose of this paper is to present the effect of damaged fireproofing on structural steel members. This study will show that a minor damage in fireproofing will reduce the fire rating of members significantly. Damaged fireproofing happens in structures due to various reasons, and the question is always how effective is this fireproofing? This paper presents the results of one type of fireproofing and presents a parametric study on the size of damage and its effect on fire resistance of structural steel members. Design/methodology/approach The study has been performed using numerical methods, thermal and structural finite element analysis. The analysis method has been verified by experimental results. Findings Small fire protection damage or loss leads to significant rise of temperature at the damaged parts and causes severe fire resistance reduction of beams. The higher fire protection damage’s extension at the bottom flange of the steel beams does not have any major influence on the rate of reduction of fire resistance of the beams. Steel beams experience greater fire resistance reduction at higher load levels because of the existing of higher stresses and loads within the steel beam section. Research limitations/implications The study has been performed using finite element analysis, and it covers a wide range of practical sizes. However, experimental work will be performed by the researchers when funding is granted. Practical implications The study provides researchers and practitioners with an estimate on the effect of damaged fireproofing on fire resistance of structural steel beams. Social implications Understanding the effect of the effect of damaged fireproofing helps in estimating the fire resistance of structural steel members, which may protect collapses and disasters. Originality/value The research is original; extensive literature review has been performed, and this research is original.

Finite element analysis of steel structures – a review of useful guidelines

2016 ◽  
Vol 7 (4) ◽  
pp. 490-515 ◽  
Author(s):  
Miguel Abambres ◽  
Mário Rui Arruda
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Structural Steel ◽  
Computer Aided Design ◽  
Steel Structures ◽  
Element Analysis ◽  
Content Type ◽  
Know How ◽  
Software Companies ◽  
Research And Design

Purpose – Since the use of advanced finite element analysis (FEA) in the design of steel structures has been increasing its popularity in order to avoid unsafe or highly conservative designs, a solid know-how in computer-aided design (CAD) and engineering (CAE) codes is necessary. Therefore the purpose of this paper is to provide an extensive review of useful guidelines concerning modelling, simulation and result validation for the accurate performance of those analyses. Design/methodology/approach – Such guidelines are obtained from international steel design codes like Eurocode 3 and DNV, publications from experienced CAE engineers and renowned FE software companies like Ansys and Altair. Topics like mesh independence, the effect of the load sequence on the load bearing capacity and steel fracture criteria are underlined. Findings – Since the use of advanced FEA in the design of steel structures is becoming more and more traditional due to the increase of its competitiveness when compared to the use of (very) conservative design rules, a solid know-how in CAD and CAE codes is necessary. Practical implications – This work will be quite useful for structural steel stress engineers, contributing for a safer use of FEA in research and design. Originality/value – This work will be quite useful for structural steel stress engineers, contributing for a safer use of FEA in research and design.

Optimization design of titanium alloy connecting rod based on structural topology optimization

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Bin Zheng ◽  
Yi Cai ◽  
Kelun Tang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Topology Optimization ◽  
Optimization Design ◽  
Equivalent Stress ◽  
Connecting Rod ◽  
Element Analysis ◽  
Content Type ◽  
The Finite Element Analysis ◽  
Maximum Equivalent Stress

Purpose The purpose of this paper is to realize the lightweight of connecting rod and meet the requirements of low energy consumption and vibration. Based on the structural design of the original connecting rod, the finite element analysis was conducted to reduce the weight and increase the natural frequencies, so as to reduce materials consumption and improve the energy efficiency of internal combustion engine. Design/methodology/approach The finite element analysis, structural optimization design and topology optimization of the connecting rod are applied. Efficient hybrid method is deployed: static and modal analysis; and structure re-design of the connecting rod based on topology optimization. Findings After the optimization of the connecting rod, the weight is reduced from 1.7907 to 1.4875 kg, with a reduction of 16.93%. The maximum equivalent stress of the optimized connecting rod is 183.97 MPa and that of the original structure is 217.18 MPa, with the reduction of 15.62%. The first, second and third natural frequencies of the optimized connecting rod are increased by 8.89%, 8.85% and 11.09%, respectively. Through the finite element analysis and based on the lightweight, the maximum equivalent stress is reduced and the low-order natural frequency is increased. Originality/value This paper presents an optimization method on the connecting rod structure. Based on the statics and modal analysis of the connecting rod and combined with the topology optimization, the size of the connecting rod is improved, and the static and dynamic characteristics of the optimized connecting rod are improved.

scholarly journals Fatigue life prediction of upper arm suspension using strain life approach

2019 ◽  
Vol 17 (1) ◽  
pp. 25-40 ◽  
Author(s):  
Hafida Kahoul ◽  
Samira Belhour ◽  
Ahmed Bellaouar ◽  
Jean Paul Dron
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Fatigue Life ◽  
Aluminium Alloys ◽  
Fatigue Analysis ◽  
Vertical Force ◽  
Upper Arm ◽  
Element Analysis ◽  
Content Type ◽  
Critical Location

Purpose This paper aims to present the fatigue life behaviour of upper arm suspension. The main objectives are to predict the fatigue life of the component and to identify the critical location. In this analysis, three aluminium alloys were used for the suspension, and their fatigue life was compared to select the suitable material for the suspension arm. Design/methodology/approach CAD model was prepared using Solid Works software, and finite element analysis was done using ANSYS 14.0 software by importing the Parasolid file to ANSYS. The model is subjected to loading and boundary conditions; the authors consider a vertical force with constant amplitude applied at the bushing that connected to the tire, the others two bushing that connected to the body of the car are constraint. Tetrahedral elements given enhanced results as compared to other types of elements; therefore, the elements (TET 10) are used. The maximum principal stress was considered in the linear static analysis, and fatigue analysis was done using strain life approach. Findings Life and damage are evaluated and the critical location was considered at node 63,754. From the fatigue analysis, aluminium alloys 7175-T73 (Al 90%-Zn 5.6%-Mg 2.5% -… …) and 2014-T6 (Al 93.5%-Cu 4.4%-Mg 0.5%… …) present a similar behaviour as compared to 6061-T6 (Al 97.9%-Mg 1.0%-Si 0.6%… … .); in this case of study, these lather are considered to be the materials of choice to manufacture the suspension arms; but 7175-T73 aluminium alloys remain the material with a better resistance to fatigue. Originality/value By the finite element analysis method and assistance of ANSYS software, it is able to analyse the different car components from varied aspects such as fatigue, and consequently save time and cost. For further research, the experimental works under controlled laboratory conditions should be done to determine the validation of the result from the software analysis.

Finite element analysis of flexible functionally graded beams with variable Poisson’s ratio

2016 ◽  
Vol 33 (8) ◽  
pp. 2421-2447 ◽  
Author(s):  
João Paulo Pascon
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Poisson’S Ratio ◽  
Scientific Literature ◽  
Functionally Graded ◽  
Poisson's Ratio ◽  
Transverse Strain ◽  
Thickness Direction ◽  
Element Analysis ◽  
Content Type

Purpose The purpose of this paper is to deal with large deformation analysis of plane beams composed of functionally graded (FG) elastic material with a variable Poisson’s ratio. Design/methodology/approach The material is assumed to be linear elastic, with a Poisson’s ratio varying according to a power law along the thickness direction. The finite element used is a plane beam of any-order of approximation along the axis, and with four transverse enrichment schemes, which can describe constant, linear, quadratic and cubic variation of the strain along the thickness direction. Regarding the constitutive law, five materials are adopted: two homogeneous limiting cases, and three intermediate FG cases. The effect of both finite element kinematics and distribution of Poisson’s ratio on the mechanical response of a cantilever is investigated. Findings In accordance with the scientific literature, the second scheme, in which the transverse strain is linearly variable, is sufficient for homogeneous long (or thin) beams under bending. However, for FG short (or moderate thick) beams, the third scheme, in which the transverse strain variation is quadratic, is needed for a reliable strain or stress distribution. Originality/value In the scientific literature, there are several studies regarding nonlinear analysis of functionally graded materials (FGMs) via finite elements, analysis of FGMs with constant Poisson’s ratio, and geometrically linear problems with gradually variable Poisson’s ratio. However, very few deal with finite element analysis of flexible beams with gradually variable Poisson’s ratio. In the present study, a reliable formulation for such beams is presented.

Probabilistic thermo-mechanical finite element analysis for the fire resistance of reinforced concrete structures

2019 ◽  
Vol 104 ◽  
pp. 22-33
Author(s):  
Roberto Chaves Spoglianti de Souza ◽  
Marco Andreini ◽  
Saverio La Mendola ◽  
Jochen Zehfuß ◽  
Christian Knaust
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Reinforced Concrete ◽  
Fire Resistance ◽  
Concrete Structures ◽  
Reinforced Concrete Structures ◽  
Element Analysis

Finite element analysis (FEA) of polylactic acid/polypropylene carbonate (PLA/PPC) blends fixation plate for craniomaxillofacial surgery

2019 ◽  
Vol 10 (5) ◽  
pp. 678-691
Author(s):  
Intan Najwa Humaira Mohamed Haneef ◽  
Norhashimah Shaffiar ◽  
Yose Fachmi Buys ◽  
Abdul Malek Abd. Hamid
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Human Body ◽  
Healing Process ◽  
Von Mises Stress ◽  
Element Analysis ◽  
Content Type ◽  
New Material ◽  
Fixation Plate ◽  
Von Mises

Purpose The internal fixation plate of bone fractures by using polylactic acid (PLA) has attracted the attention of many researchers, as it is biodegradable and biocompatible to the human body. However, its brittleness has led to implant fracture. On the contrary, polypropylene carbonate (PPC), which is also biodegradable and biocompatible, has an excellent elongation at break. The purpose of this paper is to compare the PLA fixation plate with the new fixation plate made up of PLA/PPC blends by using finite element analysis (FEA). Design/methodology/approach The mandible bone from CT data set and fixation plate was designed by using the MIMICS, Amira and Solidworks softwares. Abaqus software was used for FEA of PLA/PPC fixation plate applied on the fractured mandible bone. A model of mandibular bone with a fracture in the body was subjected to incisor load. The analysis was run to determine the von Mises stress, elongation of the fixation plate and the displacement of the fractured gap of PLA/PPC blends fixation plate. Findings The von Mises stress predicted that all the blend compositions were safe to be used as a fixation plate since the stress values were less than the yield strength. In addition, the stress value of the fixation plate was gradually decreased up to 20 percent when the amount of PPC increased to 30 percent. This indicates that the stress shielding effect was successfully reduced. The elongation of the fixation plate was gradually increased from 11.54 to 12.55 µm as the amount of PPC in the blends increased from 0 to 30 percent, thereby illustrating that the flexibility of the fixation plate was improved by the addition of PPC. Finally, the measured displacement of the fractured gap for all compositions of PLA/PPC blends fixation plate is less than 150 µm, which proves the likely success of fracture fixation by using the PLA/PPC blends. Research limitations/implications An optimum solution of PLA/PPC blends and another new material such as compatibilizer need to be introduced in the blends in order to improve the performance of PLA/PPC blends as a new material for a fixation plate. Besides, by using the same method of producing PLA/PPC blends, longer durations for in vitro degradation of PLA/PPC blends are essential to further understand the degradation behavior of the blends applied in the human body. Finally, it is also important to further test the mechanical strength of PLA/PPC blends during the degradation period to know the current strength of the implant in the healing process of the bone. Practical implications PLA fixation plate and screw can commercially be used in CMF surgery since they reduce cost because of the elimination of secondary surgery to remove the fixation plate and screw after the healing process. Social implications It is hoped that the advantages of this research will ensure the market of PLA product to continue expanding in medical application. Originality/value This study is one of the alternative ways for the biomedical researchers to improve the elongation break of PLA. Currently, many researchers focus on polymeric materials such as PLA, poly(glycolic) acid and polydioxanone blends, which were extensively being used in CMF surgery. However, the work on PLA/PPC blends to be used as one of the materials for the CMF fixation plate is very limited, if any. PPC, the proposed material for this research, will improve the mechanical performance of PLA fixation plate and screw to become more sustainable and flexible when applied on human mandible bone.

Target infrared radiation calculation model and method based on finite element analysis method in infrared photoelectric detection system

Sensor Review ◽  
2017 ◽  
Vol 37 (1) ◽  
pp. 26-32
Author(s):  
Hanshan Li
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Infrared Radiation ◽  
Detection System ◽  
Calculation Model ◽  
Analysis Method ◽  
Element Analysis ◽  
Content Type ◽  
Finite Element Analysis Method ◽  
Photoelectric Detection

Purpose The purpose of this paper is to evaluate the detection performance of infrared photoelectric detection system and establish stable tracking platform. Design/methodology/approach This paper puts forward making use of the finite element analysis method to set up the infrared radiation characteristics calculation model of flying target in infrared photoelectric detection system; researches the target optical characteristics based on the target imaging detection theory; sets up the heat balance equation of target’s surface node and gives the calculation method of total radiation intensity of flying target; and deduces the target detection distance calculation function; studies the changed regulation of radiation energy that charge coupled device (CCD) gain comes from target surface infrared heat radiations under different sky background luminance and different target flight attitude. Findings Through calculation and experiment analysis, the results show that when the target’s surface area increases or the target flight velocity is higher, the radiation energy that CCD obtained is higher, which is advantageous to the target stable detection in infrared photoelectric detection system. Originality/value This paper uses the finite element analysis method to set up the infrared radiation characteristics calculation model of flying target and give the calculation and experiment results; those results can provide some data and improve the design method of infrared photoelectric detection system, and it is of value.

Structural analysis of a cross car beam using finite element models

2015 ◽  
Vol 6 (6) ◽  
pp. 759-774
Author(s):  
André F. B. P. Pinto ◽  
S.M.O. Tavares ◽  
José M. A. César de Sá ◽  
P.M.S.T. de Castro
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Modal Analysis ◽  
Mass Production ◽  
Experimental Testing ◽  
Stress Concentrations ◽  
Element Analysis ◽  
Content Type ◽  
Explicit Finite Element ◽  
Simulation Results

Purpose – The purpose of this paper is to use PAM-CRASH, a finite element analysis solver, to assess the performance of a mass production vehicle cross car beam (CCB) under an overlap frontal crash scenario (crashworthiness). Simulation results were reviewed according to what is plausible to register regarding some critical points displacements and, moreover, to identify its stress concentrations zones. Furthermore, it was also computed the CCB modal analysis (noise, vibration and harshness (NVH) assessment) in order to examine if its natural modes are within with the original equipment manufacturer (OEM) design targets. Design/methodology/approach – The available data at the beginning of the present study consisted of the structure CAD file and performance requirements stated by the OEM for NVH. No technical information was available concerning crashworthiness. Taking into account these limitations, it was decided to adapt the requirements for other mass production cars of the same category, as regards dynamic loading. A dynamic explicit code finite element analysis was performed throughout the CCB structure simulating the 120e−3 s crash event. For the modal analysis, there were some necessary modifications to the explicit finite element model in order to perform the analysis in implicit code. In addition, the car body in white stiffness was assigned at the boundaries. These stiffness values are withdrawn from the points where the CCB is attached to the car body’s sheet metal components. Findings – Although the unavailability of published results for this particular CCB model prevents a comparison of the present results, the trends and order of magnitude of the crash simulation results are within the expectations for this type of product. Concerning modal analysis, the steering column first natural frequency has a percent deviation from the design lower bound value of 5.09 percent when local body stiffness is considered and of 1.94 percent with fixed boundary conditions. The other requirement of the NVH assessment regarding a 5 Hz minimum interval between first vehicle CCB mode and the first mode of the steering column was indeed achieved with both boundary configurations. Originality/value – This study is a further confirmation of the interest of numerical modeling as a first step before actual experimental testing, saving time and money in an automotive industry that has seen an enormous increase of the demand for new car models in the last decade.

Sign in / Sign up

Export Citation Format

Share Document