A high-linearity Multi-stAge noise SHaping (MASH) 2–2–2 sigma–delta modulator (SDM) for 20-MHz signal bandwidth (BW) was presented. Multi-bit quantizers were employed in each stage to provide a sufficiently low quantization noise level and thus improve the signal-to-noise ratio (SNR) performance of the modulator. Mismatch noise in the internal multi-bit digital-to-analog converters (DACs) was analyzed in detail, and an alternative randomization scheme based on multi-layer butterfly-type network was proposed to suppress spurious tones in the output spectrum. Fabricated in a 0.18-[Formula: see text]m single–poly 4-metal Complementary Metal Oxide Semiconductor (CMOS) process, the modulator occupied a chip area of 0.45[Formula: see text]mm2, and dissipated a power of 28.8[Formula: see text]mW from a 1.8-V power supply at a sampling rate of 320[Formula: see text]MHz. The measured spurious-free dynamic range (SFDR) was 94[Formula: see text]dB where 17-dB improvement was achieved by applying the randomizers for multi-bit DACs in the first two stages. The peak signal-to-noise and distortion ratio (SNDR) was 76.9[Formula: see text]dB at [Formula: see text]1 dBFS @ 2.5-MHz input, and the figure-of-merit (FOM) was 126[Formula: see text]pJ/conv.
Second-order sigma-delta modulator in standard cmos technology
