Long distance and high bandwidth wireless link tests for a 39 GHz to 28 GHz 5G low-cost repeater

Author(s):  
Simone Maier ◽  
Heinz Schlesinger ◽  
Wolfgang Templ ◽  
Harish Viswanathan
Author(s):  
Jonathan Guerin ◽  
Marius Portmann ◽  
Konstanty Bialkowski ◽  
Wee Lum Tan ◽  
Steve Glass

Proceedings ◽  
2018 ◽  
Vol 2 (13) ◽  
pp. 858 ◽  
Author(s):  
Timothy A. Vincent ◽  
Yuxin Xing ◽  
Marina Cole ◽  
Julian W. Gardner

A new signal processing technique has been developed for resistive metal oxide (MOX) gas sensors to enable high-bandwidth measurements and enhanced selectivity at PPM levels (<50 PPM VOCs). An embedded micro-heater is thermally pulsed from 225 to 350 °C, which enables the chemical reactions in the sensor film (e.g., SnO2, WO3, NiO) to be extracted using a fast Fourier transform. Signal processing is performed in real-time using a low-cost microcontroller integrated into a sensor module. The approach enables the remove of baseline drift and is resilient to environmental temperature changes. Bench-top experimental results are presented for 50 to 200 ppm of ethanol and CO, which demonstrate our sensor system can be used within a mobile robot.


2018 ◽  
Vol 228 ◽  
pp. 02001
Author(s):  
Bing Han ◽  
Qiang Fu

For the sake of ameliorating the faultiness of low precision for conventional surveillance methods of water stage, and realize the goal of real time data collection, automated actions and long-distance conveying, we have designed a novel surveillance system of water stage with the resonator pressure transducer and wireless connectivity technologies. The surveillance system of water stage has come into service in a field experiment project of a certain oil and gas pipeline engineering. By analyzing and comparing the results of experiments, the system has the merits of high agility, reliability, instantaneity and accuracy, low cost, capacity of resisting disturbance, which making it ideal for use in unattended supervising of water stage for multi-spots observation based on regional scale. The surveillance system can well satisfy the actual demand of auto hydrogeological parameters monitoring for geotechnical engineering.


2018 ◽  
Vol 16 (36) ◽  
pp. 104-112
Author(s):  
Abdullah A. Abdullah

Light has already becomes a popular means of communication, and the high-bandwidth data into free space without the use of wires. A great idea took us to design a new system for transmitting sound through free space at (650, 532) nm wavelengths using reflective mirrors under different atmospheric conditions. The study showed us the effect of various weather factors (temperature, wind speed and humidity) on these wavelengths for different distances. As well as studying the attenuation caused by long-distance laser and beam divergence, A reflective dish was used to focus the spot of the laser beam on the photocell. Results were discussed under the effect of these factors and the attenuation resulting from the beam divergence. Thus, the system performance can be improved for range and the quantity transfer data by increasing transmitted power and reducing the divergence of the laser beam.


2000 ◽  
Vol 33 (1-6) ◽  
pp. 789-802 ◽  
Author(s):  
José Brustoloni ◽  
Juan Garay

2018 ◽  
Vol 10 (38) ◽  
pp. 4648-4654 ◽  
Author(s):  
Tae Joon Kwak ◽  
Wookkun Kwon ◽  
Jiang Yang ◽  
Sang Woo Lee ◽  
Woo-Jin Chang

Paper fluidics has recently offered an approach to precisely guide liquid flow in analytical devices with a low-cost regime.


Author(s):  
Yufang Li ◽  
Honglin Zhao ◽  
Yongbiao Xu ◽  
Deguo Wang

Subsea umbilical cable is an important link to transmit power and signals in subsea production system, often lasts for tens of kilometers in deep-sea projects. It is expensive, bulky, and inconvenient to transport. In this article, a compact, low-cost umbilical cable electrical simulator is proposed, which can be equivalent to the real umbilical cable in power transmission characteristics and can adjust parameters in a certain range. By studying the electrical transmission characteristics of long umbilical cable, the calculation method of electrical transmission characteristics is determined. A simulation device for simulating the transmission characteristics of umbilical cable is designed, which can be used to simulate the umbilical cable diameter of 10 and 16 mm2. The voltage drop characteristics, signal transmission attenuation characteristics, and power carrier characteristics of the umbilical cable electrical simulation device are simulated and experimentally analyzed. The experimental results show that the voltage drop characteristics, signal transmission attenuation characteristics, and power carrier characteristics of the umbilical cable electrical simulator are in good agreement with the real umbilical cable. The simulation device of umbilical cable can well simulate the power and signal transmission characteristics of real umbilical cable.


Sign in / Sign up

Export Citation Format

Share Document