Life cycle testing of lithium batteries for fast charging and second-use applications

Author(s):  
Andrew Burke ◽  
Marshall Miller
2021 ◽  
Vol 11 (9) ◽  
pp. 3834
Author(s):  
Jozef Živčák ◽  
Jaroslava Kádárová ◽  
Michaela Kočišová ◽  
Laura Lachvajderová ◽  
Michal Puškár

This article focuses on the practical use of used batteries from electric vehicles also known as 2nd life batteries. The first part emphasizes lithium batteries, which describes the overall life cycle of the battery, its number of charging cycles and secondary use. This part of the article also focuses on implemented projects of 2nd life batteries from electric vehicles and there is an analysis of the market potential for 2nd life batteries mentioned at the end of the chapter. The second part of this study offers a practical proposition of two possible strategies for using 2nd life batteries. The main source of income in both cases is the provision of regulatory energy. Using the formulas and the function of the calculation model created in the MS Excel software, the appropriate price of the battery for car manufacturers will be calculated and from other possible scenarios of individual strategies will be expressed. The first strategy works with large central battery storage and the second strategy uses small, decentralized battery storage with a fast-charging station.


Nanoscale ◽  
2016 ◽  
Vol 8 (14) ◽  
pp. 7408-7415 ◽  
Author(s):  
Pingping Sun ◽  
Xueying Zhao ◽  
Renpeng Chen ◽  
Tao Chen ◽  
Lianbo Ma ◽  
...  

Sensors ◽  
2018 ◽  
Vol 18 (9) ◽  
pp. 2771 ◽  
Author(s):  
Qing Guo ◽  
Wenzheng Xu ◽  
Tang Liu ◽  
Hongyou Li ◽  
Zheng Li ◽  
...  

The employment of mobile vehicles to charge sensors via wireless energy transfer is a promising technology to maintain the perpetual operation of wireless sensor networks (WSNs). Most existing studies assumed that sensors are powered with off-the-shelf batteries, e.g., Lithium batteries, which are cheap, but it takes some non-trivial time to fully charge such a battery (e.g., 30–80 min). The long charging time may incur long sensor dead durations, especially when there are many lifetime-critical sensors to be charged. On the other hand, other studies assumed that every sensor is powered with an ultra-fast charging battery, where it only takes some trivial time to replenish such a battery, e.g., 1 min, but the adoption of many ultra-fast sensors will bring about high purchasing cost. In this paper, we propose a novel heterogeneous sensor network model, in which there are only a few ultra-fast sensors and many low-cost off-the-shelf sensors. The deployment cost of the network in the model is low, as the number of ultra-fast sensors is limited. We also have an important observation that we can significantly shorten sensor dead durations by enabling the ultra-fast sensors to relay more data for lifetime-critical off-the-shelf sensors. We then propose a joint charging scheduling and routing allocation algorithm, such that the longest sensor dead duration is minimized. We finally evaluate the performance of the proposed algorithm through extensive simulation experiments. Experimental results show that the proposed algorithm is very promising and the longest sensor dead duration by it is only about 10% of those by existing algorithms.


Nano Energy ◽  
2018 ◽  
Vol 53 ◽  
pp. 753-762 ◽  
Author(s):  
Sihao Xia ◽  
Linqin Mu ◽  
Zhengrui Xu ◽  
Junyang Wang ◽  
Chenxi Wei ◽  
...  

2021 ◽  
Vol MA2021-01 (2) ◽  
pp. 162-162
Author(s):  
Boryann (Bor Yann) Liaw ◽  
Yulun Zhang ◽  
Yuxiao Lin

Small ◽  
2019 ◽  
Vol 15 (15) ◽  
pp. 1805389 ◽  
Author(s):  
Gao‐Long Zhu ◽  
Chen‐Zi Zhao ◽  
Jia‐Qi Huang ◽  
Chuanxin He ◽  
Jian Zhang ◽  
...  

2020 ◽  
Vol 30 (50) ◽  
pp. 2005357
Author(s):  
Xuejie Gao ◽  
Xiaofei Yang ◽  
Keegan Adair ◽  
Jianneng Liang ◽  
Qian Sun ◽  
...  

2006 ◽  
Vol 972 ◽  
Author(s):  
Quan Fan ◽  
M. Stanley Whittingham

AbstractThe carbon anode presently used in commercial lithium ion batteries has a relatively low capacity and may pose safety problems particularly under fast charging. Nanosized amorphous materials have excellent electrochemical behavior when applied as anodes for lithium ion batteries; especially they have advantages over bulk materials on capacity retention and rate capability. The initial studies on some amorphous compounds are promising. A commercialized tin-cobalt-carbon amorphous material, which is composed of ∼5nm nanoparticles, shows a capacity retention of >350 mAh/g for 50+ cycles. Manganese oxide nanofibers were synthesized by polymer templated electrospinning followed by calcinations. The fibers have 200-500 nm diameter and the main composition is Mn3O4. The capacity remains 400 mAh/g for at least 50 cycles.


2021 ◽  
Author(s):  
Ye Xiao ◽  
Rui Xu ◽  
Lei Xu ◽  
Jun-Fan Ding ◽  
Jia-Qi Huang

Sign in / Sign up

Export Citation Format

Share Document