An output feedback tracking control based on neural sliding mode and high order sliding mode observer

Author(s):  
Anh Tuan Vo ◽  
Hee-Jun Kang ◽  
Van-Cuong Nguyen
Author(s):  
Mien Van ◽  
Hee-Jun Kang ◽  
Kyoo-Sik Shin

In this paper, a robust output feedback tracking control scheme for uncertain robot manipulators with only position measurements is investigated. First, a quasi-continuous second-order sliding mode (QC2S)-based exact differentiator and super-twisting second-order sliding mode (STW2S) controllers are designed to guarantee finite time convergence. Although the QC2S produces continuous control and less chattering than that of a conventional sliding mode controller and other high-order sliding mode controllers, a large amount of chattering exists when the sliding manifold is defined by the equation [Formula: see text]. To decrease the chattering, an uncertainty observer is used to compensate for the uncertainty effects, and this controller may possess a smaller switching gain. Compared to the QC2S controller, the STW2S has less chattering and tracking error when the system remains on the sliding manifold [Formula: see text]. Therefore, to further eliminate the chattering and obtain a faster transient response and higher tracking precision, we develop a quasi-continuous super-twisting second-order sliding mode controller, which integrates both the merits of QC2S and STW2S controllers. The stability and convergence of the proposed scheme are theoretically demonstrated. Finally, computer simulation results for a PUMA560 robot comparing with conventional QC2S and STW2S controllers are shown to verify the effectiveness of the proposed algorithm.


Author(s):  
Van Mien ◽  
Hee-Jun Kang ◽  
Kyoo-Sik Shin

This article develops a new output feedback tracking control scheme for uncertain robot manipulators with only position measurements. Unlike the conventional sliding mode controller, a quasi-continuous second-order sliding mode controller (QC2C) is first designed. Although the QC2C produces continuous control and less chattering than conventional sliding mode and other high-order sliding mode controllers, chattering exists when the sliding manifold is defined by the equation [Formula: see text]. To alleviate the chattering, an adaptive fuzzy QC2C (FQC2C) is designed, in which the fuzzy system is used to adaptively tune the sliding mode controller gain. Furthermore, in order to eliminate chattering and achieve higher tracking accuracy, quasi-continuous third-order sliding mode controller (QC3C) and fuzzy QC3C (FQC3C) are investigated. These controllers incorporate a super-twisting second-order sliding mode observer for estimating the joint velocities, and a robust exact differentiator to estimate the sliding manifold derivative; therefore, the velocity measurement is not required. Finally, computer simulation results for a PUMA560 industrial robot are also shown to verify the effectiveness of the proposed strategy.


2017 ◽  
Vol 12 (4) ◽  
pp. 1-11
Author(s):  
Shibly Ahmed AL-Samarraie ◽  
Mustafa H. Mishary

A perturbed linear system with property of strong observability ensures that there is a sliding mode observer to estimate the unknown form inputs together with states estimation. In the case of the electro-hydraulic system with piston position measured output, the above property is not met. In this paper, the output and its derivatives estimation were used to build a dynamic structure that satisfy the condition of strongly observable. A high order sliding mode observer (HOSMO) was used to estimate both the resulting unknown perturbation term and the output derivatives. Thereafter with one signal from the whole system (piton position), the piston position make tracking to desire one with a simple linear output feedback controller after canceling the perturbation term. The numerical simulation results showed excellent performance of the proposed output feedback controller in forcing the piston position to follow the desired reference position. Moreover, the control effort spent was minimal.


Sign in / Sign up

Export Citation Format

Share Document