Operation Control Strategy of Microgrid Based on Energy Storage System

Author(s):  
He Qingdong ◽  
Xia Bin ◽  
Wang Wei ◽  
Cheng Yueliang
Electronics ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 834
Author(s):  
Jiechao Lv ◽  
Xiaoli Wang ◽  
Guishuo Wang ◽  
Yuhou Song

With the rapid development of renewable energy technologies, islanded DC microgrids have received extensive attention in the field of distributed power generation due to their plug-and-play, flexible operation modes and convenient power conversion, and are likely to be one of the mainstream structures of microgrids in the future. The islanded DC microgrid contains multiple distributed power generation units. The battery energy storage system (BESS) is the main controlled unit used to smooth power fluctuations. The main parameter of concern is the state of charge (SOC). In order to maintain the stability of the microgrid, this paper takes the islanded DC microgrid as the research object and designs a control strategy based on the SOC of the BESS. Additionally, in the control strategy, the BESS’s energy balance control strategy and the microgrid’s operation control strategy are emphatically designed. The designed BESS control strategy adjusts the droop coefficient in real time according to the SOC of the battery energy storage unit (BESU), and controls the charge and discharge power of the BESU to achieve the SOC balance among the BESUs. The microgrid operation control strategy takes the energy storage system (ESS) as the main controlled unit to suppress power fluctuations, and distributes the power of distributed power sources according to the SOC of the BESS to achieve power balance in the microgrid, and control the DC bus voltage fluctuation deviation within 4.5%.


Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1121
Author(s):  
Rozmysław Mieński ◽  
Przemysław Urbanek ◽  
Irena Wasiak

The paper includes the analysis of the operation of low-voltage prosumer installation consisting of receivers and electricity sources and equipped with a 3-phase energy storage system. The aim of the storage application is the management of active power within the installation to decrease the total power exchanged with the supplying network and thus reduce energy costs borne by the prosumer. A solution for the effective implementation of the storage system is presented. Apart from the active power management performed according to the prosumer’s needs, the storage inverter provides the ancillary service of voltage regulation in the network according to the requirements of the network operator. A control strategy involving algorithms for voltage regulation without prejudice to the prosumer’s interest is described in the paper. Reactive power is used first as a control signal and if the required voltage effect cannot be reached, then the active power in the controlled phase is additionally changed and the Energy Storage System (ESS) loading is redistributed in phases in such a way that the total active power set by the prosumer program remains unchanged. The efficiency of the control strategy was tested by means of a simulation model in the PSCAD/EMTDC program. The results of the simulations are presented.


Sign in / Sign up

Export Citation Format

Share Document