Identification of Boiling Two-phase Flow Patterns in Water Wall Tube Based on BP Neural Network

Author(s):  
Lei Guo ◽  
Shusheng Zhang ◽  
Yaqun Chen ◽  
Lin Cheng
1991 ◽  
pp. 1617-1620 ◽  
Author(s):  
Norio BABA ◽  
Yoshiyuki YAMASHITA ◽  
Yasuhiro SHIRAISHI

2018 ◽  
Vol 140 (10) ◽  
Author(s):  
Majdi Chaari ◽  
Abdennour C. Seibi ◽  
Jalel Ben Hmida ◽  
Afef Fekih

Simplifying assumptions and empirical closure relations are often required in existing two-phase flow modeling based on first-principle equations, hence limiting its prediction accuracy and in some instances compromising safety and productivity. State-of-the-art models used in the industry still include correlations that were developed in the sixties, whose prediction performances are at best acceptable. To better improve the prediction accuracy and encompass all pipe inclinations and flow patterns, we propose in this paper an artificial neural network (ANN)-based model for steady-state two-phase flow liquid holdup estimation in pipes. Deriving the best input combination among a large reservoir of dimensionless Π groups with various fluid properties, pipe characteristics, and operating conditions is a laborious trial-and-error procedure. Thus, a self-adaptive genetic algorithm (GA) is proposed in this work to both ease the computational complexity associated with finding the elite ANN model and lead to the best prediction accuracy of the liquid holdup. The proposed approach was implemented using the Stanford multiphase flow database (SMFD), chosen for being among the largest and most complete databases in the literature. The performance of the proposed approach was further compared to that of two prominent models, namely a standard empirical correlation-based model and a mechanistic model. The obtained results along with the comparison analysis confirmed the enhanced accuracy of the proposed approach in predicting liquid holdup for all pipe inclinations and fluid flow patterns.


Fluids ◽  
2021 ◽  
Vol 6 (6) ◽  
pp. 226
Author(s):  
Rashal Abed ◽  
Mohamed M. Hussein ◽  
Wael H. Ahmed ◽  
Sherif Abdou

Airlift pumps can be used in the aquaculture industry to provide aeration while concurrently moving water utilizing the dynamics of two-phase flow in the pump riser. The oxygen mass transfer that occurs from the injected compressed air to the water in the aquaculture systems can be experimentally investigated to determine the pump aeration capabilities. The objective of this study is to evaluate the effects of various airflow rates as well as the injection methods on the oxygen transfer rate within a dual injector airlift pump system. Experiments were conducted using an airlift pump connected to a vertical pump riser within a recirculating system. Both two-phase flow patterns and the void fraction measurements were used to evaluate the dissolved oxygen mass transfer mechanism through the airlift pump. A dissolved oxygen (DO) sensor was used to determine the DO levels within the airlift pumping system at different operating conditions required by the pump. Flow visualization imaging and particle image velocimetry (PIV) measurements were performed in order to better understand the effects of the two-phase flow patterns on the aeration performance. It was found that the radial injection method reached the saturation point faster at lower airflow rates, whereas the axial method performed better as the airflow rates were increased. The standard oxygen transfer rate (SOTR) and standard aeration efficiency (SAE) were calculated and were found to strongly depend on the injection method as well as the two-phase flow patterns in the pump riser.


Author(s):  
Weilin Qu ◽  
Seok-Mann Yoon ◽  
Issam Mudawar

Knowledge of flow pattern and flow pattern transitions is essential to the development of reliable predictive tools for pressure drop and heat transfer in two-phase micro-channel heat sinks. In the present study, experiments were conducted with adiabatic nitrogen-water two-phase flow in a rectangular micro-channel having a 0.406 × 2.032 mm cross-section. Superficial velocities of nitrogen and water ranged from 0.08 to 81.92 m/s and 0.04 to 10.24 m/s, respectively. Flow patterns were first identified using high-speed video imaging, and still photos were then taken for representative patterns. Results reveal that the dominant flow patterns are slug and annular, with bubbly flow occurring only occasionally; stratified and churn flow were never observed. A flow pattern map was constructed and compared with previous maps and predictions of flow pattern transition models. Annual flow is identified as the dominant flow pattern for conditions relevant to two-phase micro-channel heat sinks, and forms the basis for development of a theoretical model for both pressure drop and heat transfer in micro-channels. Features unique to two-phase micro-channel flow, such as laminar liquid and gas flows, smooth liquid-gas interface, and strong entrainment and deposition effects are incorporated into the model. The model shows good agreement with experimental data for water-cooled heat sinks.


2012 ◽  
Vol 51 (13) ◽  
pp. 5056-5066 ◽  
Author(s):  
P. S. Sarkar ◽  
K. K. Singh ◽  
K. T. Shenoy ◽  
A. Sinha ◽  
H. Rao ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document