A novel Ku-band microstrip antenna

Author(s):  
Mohamed Ahmed Hassan Oweis ◽  
Hussein Hamed Mahmoud Ghouz
Keyword(s):  
Author(s):  
Muhammet Tahir Guneser ◽  
Cihat Seker ◽  
Seda Kersolar ◽  
Ibrahim Telli ◽  
Sevda Dilek Dogangun ◽  
...  
Keyword(s):  
X Band ◽  

2018 ◽  
Vol 7 (2.16) ◽  
pp. 11
Author(s):  
Sanjeev Kumar ◽  
Ravi Kumar ◽  
Rajesh Kumar Vishwakarma

A microstrip antenna with a circular disc design and modified ground is proposed in this paper. Circular shapes of different size have been slotted out from the radiating patch for achieving extended ultra wideband (UWB) with GSM/Bluetooth bands with maximum bandwidth of 17.7 GHz (0.88-18.6 GHz). Further, characteristic of dual notch band is achieved, when a combination of T and L-shaped slots are etched into the circular disc and ground plane respectively. Change in length of slots is controlling the notch band characteristics. The proposed antenna has rejection bandwidth of 1.3-2.2 GHz (LTE band), 3.2-3.9 GHz (WiMAX band) and 5.2-6.1 GHz (WLAN band) respectively. It covers the frequency range of 0.88-18.5 GHz with the VSWR of less than 2. Also, an equivalent parallel resonant circuit has been demonstrated for band notched frequencies of the designed antenna. The gain achieved by the proposed antenna is 6.27 dBi. This antenna has been designed, investigated and fabricated for GSM, Bluetooth, UWB, X and Ku band applications. The stable gain including H & E-plane radiation pattern with good directivity and omnidirectional behavior is achieved by the proposed antenna. Measured bandwidths are 0.5 GHz, 0.8 GHz, 1.1 GHz and 11.7 GHz respectively. 


Author(s):  
Dr. N. Srinivasa Rao

The microstrip antenna required for higher frequency application is to be light in weight, easy to fabricate and small in size. As the applications in S-band and Ku-band are increasing with the increase in technology the requirement for higher data rate so the proposed work is to design a 24GHz (ka band) rectangular microstrip antenna with stripline feeding, return loss to be less than -20dB and VSWR less than 0.5. The substrate is chosen to be RT/duroid 5880 with relative permeability 2.2. it is capable of covering satellite application, telemetry. HFSS software tool is used to design the antenna.


2021 ◽  
pp. 118-125
Author(s):  
Farooq Al-Janabi ◽  
◽  
Mandeep Jit Singh ◽  
Amar Partap Singh Pharwaha

Antennas are the most important unit in almost all wireless communications, which played the key of transmitting the radiating electromagnetic waves after converting it from electrical signal. In this paper, designed an antenna that is capable to operate at frequencies between 12 GHz – 18 GHz for Ku band, and 26.5 GHz – 40 GHz for Ka band. This antenna was designed to overcome the narrow bandwidth, low gain, and large size of most satellite application antennas. By using a square shaped patch on a 4.3 dielectric constant substrate, modified and optimized the dimensions of the patch element, this antenna operated on dual-band frequencies between 12 GHz – 18 GHz and 26.5 GHz – 40 GHz, which satisfies the required bandwidth for satellite application. The antenna design was simulated using CST Microwave Studio software to analyze and evaluate the performance of the antenna design visibility.


Author(s):  
Satya Swaroop Nanda ◽  
Jabakankshya Das ◽  
Sarmistha Satrusalya ◽  
Mihir Narayan Mohanty
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document