Cooperative Fire Extinguishing Technology of Battery Energy Storage Device in Cluster

The intermittent behaviour of renewable energy generation has become an essential issue for power deficiency in the distribution network. The high penetration of wind and solar became the primary task for the optimal size of energy storage to support the power mismatch. In the present work, the impact of the energy storage device with distribution generation (DGs) have been determined in a renewable integrated distribution system for power loss minimization. The main contribution of this paper is: (i) optimal location of DGs and battery are obtained by solving single and multi-objective functions. (ii) Determination of DG and battery size for minimization of power loss and system cost. (iii) Impact of battery energy storage device on loss profile and total cost of the system. The impact of day load variation has been considered in the study. The results have been obtained for IEEE-33 bus test system using a hybrid GAMS and particle swarm optimization (PSO) algorithm. The power loss is reduced to 47.60% with single DG and battery energy storage (BES). In addition, the power loss is reduced to 59.285% with two DGs and BES. The simulation results of the test system have been compared with other existing results.

Download Full-text

Modeling and Control of Solar PV with Battery Energy Storage for Rural Electrification

Tanzania Journal of Engineering and Technology ◽

10.52339/tjet.v39i1.518 ◽

2020 ◽

Vol 39 (1) ◽

pp. 47-58

Author(s):

Irene H. Masenge ◽

Francis Mwasilu

Keyword(s):

Energy Storage ◽

Rural Areas ◽

Storage System ◽

Energy Resource ◽

Rural Electrification ◽

Storage Device ◽

Solar Pv ◽

Pv System ◽

Battery Energy Storage ◽

Battery Energy

In rural areas where electric power grid network is rarely available, power generation from renewable energy resource such as solar photovoltaic (PV) is mostly accomplished in standalone mode. The standalone solar PV system requires energy storage device to achieve reliable power supply to the end users. This paper presents modelling and coordination control of solar PV with battery energy storage system (BESS) for rural-electrification applications. The proposed control is accomplished via a bidirectional buck-boost converter with the objective of maintaining voltage at the DC bus constant. Simulation results based-on MATLAB/Simulink platform confirms good performance of the proposed system.

Download Full-text

Three-phase series-connected photovoltaic generator for harmonic and reactive power compensation with battery energy storage device

Transactions of the Institute of Measurement and Control ◽

10.1177/0142331216629199 ◽

2016 ◽

Vol 39 (7) ◽

pp. 1071-1080

Author(s):

Maheswar P Behera ◽

Pravat K Ray

Keyword(s):

Energy Storage ◽

Reactive Power ◽

Voltage Source ◽

Storage Device ◽

Voltage Source Converter ◽

Radiation Level ◽

Battery Energy Storage ◽

Three Phase ◽

Dc Bus ◽

Battery Energy

This paper presents a photovoltaic (PV) generator along with a battery energy storage system connected in series with a three-phase grid. The objective of the proposed system is to provide uninterruptable compensation to the series-connected grid and non-linear load during strong sunlight as well as at night or in cloudy conditions. The interface between the grid and the PV is carried out through a voltage source converter (VSC), eliminating both the current and voltage harmonics and compensating the reactive power. The DC voltage control of the DC bus capacitor is employed in order to maintain unity power factor operation of the system, irrespective of changes in solar radiation level or due to change in load. Another control scheme is implemented to charge and discharge the connected battery whenever the sun goes out, to meet the DC bus voltage requirement of the VSC through a bidirectional DC-DC converter.

Download Full-text