Misfire Detection on Internal Combustion Engine Based on Fluctuation of Exhaust Gas Temperature

2018 ◽  
Author(s):  
Hong-Mei Yan ◽  
Xiao-Jian Yi ◽  
Hui-Na Mu ◽  
Yu-Quan Wen ◽  
Hou Peng ◽  
...  
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Exhaust Gas ◽  
Gas Temperature ◽  
Exhaust Gas Temperature ◽  
Misfire Detection

Simulation Research on the Application of Thermoelectric Waste Heat Recovery of Internal Combustion Engine

2010 ◽  
Author(s):  
Maohai Wang ◽  
Thomas Josef Daun ◽  
Yangjun Zhang ◽  
Weilin Zhuge
Keyword(s):  
Internal Combustion Engine ◽  
Waste Heat ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Parameter Study ◽  
Exhaust Gas ◽  
Gas Temperature ◽  
Simulation Research ◽  
Exhaust Gas Temperature ◽  
Engine Power

In this paper, the development of a thermoelectric generator (TEG) simulation model and its implementation into an internal combustion engine (ICE) system model are demonstrated. The TEG model is calibrated with respect to an experimental basis presented in a previously published paper. A TEG parameter study, an analysis of the overall system and the interaction between the TEG and the ICE are carried out. The simulation results indicate that the exhaust gas temperature has a much more significant influence on the TEG performance than the exhaust gas mass flow rate. Without considering the influence of additional backpressure, the application of a TEG shows potential to increase the effective engine power; thereby improving the overall efficiency by approximately 0.6 to 1.7% (depending on engine speed and load). However, when taking additional backpressure into account, this gain in effective engine power is reduced slightly, resulting in a change of the efficiency range to between 0.2 and 1.7%. This illustrates the importance of taking the backpressure into account when designing a real world TEG.

scholarly journals Experimental study of carbide as an alternative fuel using in Internal Combustion Engine

2019 ◽  
pp. 106-114
Author(s):  
Ganesh M ◽  
Jagadeesan S ◽  
Bharathwaj S
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Alternative Fuel ◽  
Exhaust Gas ◽  
Gas Temperature ◽  
Smoke Emission ◽  
Brake Thermal Efficiency ◽  
Hydrocarbon Emission ◽  
Exhaust Gas Temperature

The emerging world need alternative fuel for diesel and petrol. This is the experiment that using the carbide as the alternative fuel for internal combustion engine by converting the carbide as the acetylene using water. The brake thermal efficiency, exhaust gas temperature, smoke emission, CO2 emission, NOx emission, hydrocarbon emission, performance of the engine is studied under this Experiment

Misfire detection on internal combustion engines using exhaust gas temperature with low sampling rate

2011 ◽  
Vol 31 (17-18) ◽  
pp. 4125-4131 ◽  
Author(s):  
Masayuki Tamura ◽  
Hitoshi Saito ◽  
Yukimaro Murata ◽  
Kunihiro Kokubu ◽  
Satoshi Morimoto
Keyword(s):  
Internal Combustion Engines ◽  
Sampling Rate ◽  
Internal Combustion ◽  
Exhaust Gas ◽  
Combustion Engines ◽  
Gas Temperature ◽  
Exhaust Gas Temperature ◽  
Misfire Detection

scholarly journals Exhaust Gas Temperature Measurements in Diagnostics of Turbocharged Marine Internal Combustion Engines Part I Standard Measurements

2015 ◽  
Vol 22 (1) ◽  
pp. 47-54 ◽  
Author(s):  
Zbigniew Korczewski
Keyword(s):  
Internal Combustion Engines ◽  
Internal Combustion ◽  
Technical Condition ◽  
Temperature Measurements ◽  
Injection System ◽  
Exhaust Gas ◽  
Combustion Engines ◽  
Gas Temperature ◽  
Measuring Signal ◽  
Exhaust Gas Temperature

Abstract The article discusses the problem of diagnostic informativeness of exhaust gas temperature measurements in turbocharged marine internal combustion engines. Theoretical principles of the process of exhaust gas flow in turbocharger inlet channels are analysed in its dynamic and energetic aspects. Diagnostic parameters are defined which enable to formulate general evaluation of technical condition of the engine based on standard online measurements of the exhaust gas temperature. A proposal is made to extend the parametric methods of diagnosing workspaces in turbocharged marine engines by analysing time-histories of enthalpy changes of the exhaust gas flowing to the turbocompressor turbine. Such a time-history can be worked out based on dynamic measurements of the exhaust gas temperature, performed using a specially designed sheathed thermocouple. The first part of the article discusses possibilities to perform diagnostic inference about technical condition of a marine engine with pulse turbocharging system based on standard measurements of exhaust gas temperature in characteristic control cross-sections of its thermal and flow system. Selected metrological issues of online exhaust gas temperature measurements in those engines are discusses in detail, with special attention being focused on the observed disturbances and thermodynamic interpretation of the recorded measuring signal. Diagnostic informativeness of the exhaust gas temperature measurements performed in steady-state conditions of engine operation is analysed in the context of possible evaluations of technical condition of the engine workspaces, the injection system, and the fuel delivery process.

scholarly journals Recovery of Exhaust Waste Heat for ICE Using the Beta Type Stirling Engine

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Wail Aladayleh ◽  
Ali Alahmer
Keyword(s):  
Internal Combustion Engine ◽  
Waste Heat ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Stirling Engine ◽  
Gas Temperature ◽  
Ic Engine ◽  
Exhaust Waste Heat ◽  
Useful Power ◽  
Shaft Power

This paper investigates the potential of utilizing the exhaust waste heat using an integrated mechanical device with internal combustion engine for the automobiles to increase the fuel economy, the useful power, and the environment safety. One of the ways of utilizing waste heat is to use a Stirling engine. A Stirling engine requires only an external heat source as wasted heat for its operation. Because the exhaust gas temperature may reach 200 to 700°C, Stirling engine will work effectively. The indication work, real shaft power and specific fuel consumption for Stirling engine, and the exhaust power losses for IC engine are calculated. The study shows the availability and possibility of recovery of the waste heat from internal combustion engine using Stirling engine.

scholarly journals A quick, simplified approach to the evaluation of combustion rate from an internal combustion engine indicator diagram

2008 ◽  
Vol 12 (1) ◽  
pp. 85-102 ◽  
Author(s):  
Miroljub Tomic ◽  
Slobodan Popovic ◽  
Nenad Miljic ◽  
Stojan Petrovic ◽  
Milos Cvetic ◽  
...  
Keyword(s):  
Internal Combustion Engine ◽  
Heat Release ◽  
Heat Release Rate ◽  
Release Rate ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Gas Temperature ◽  
Compression Ignition Engine ◽  
Practical Applications ◽  
Simplified Approach

In this paper a simplified procedure of an internal combustion engine in-cylinder pressure record analysis has been presented. The method is very easy for programming and provides quick evaluation of the gas temperature and the rate of combustion. It is based on the consideration proposed by Hohenberg and Killman, but enhances the approach by involving the rate of heat transferred to the walls that was omitted in the original approach. It enables the evaluation of the complete rate of heat released by combustion (often designated as ?gross heat release rate? or ?fuel chemical energy release rate?), not only the rate of heat transferred to the gas (which is often designated as ?net heat release rate?). The accuracy of the method has been also analyzed and it is shown that the errors caused by the simplifications in the model are very small, particularly if the crank angle step is also small. A several practical applications on recorded pressure diagrams taken from both spark ignition and compression ignition engine are presented as well.

Sign in / Sign up

Export Citation Format

Share Document