With the ongoing trend toward miniaturization via system-on-chip (SoC), both radio-frequency (RF) SoCs and on-chip multi-sensory systems are gaining significance. This paper compares the inductance of a miniaturized on-chip near field communication (NFC) antenna versus the conventional screen-printed on-substrate ones that have been used for the transfer of sensory data from a chip to a cell phone reader. Furthermore, the transferred power efficiency in a coupled NFC system is calculated for various chip coil geometries and the results are compared. The proposed NFC antenna was fabricated via a lithography process for an application-specific integrated circuit (ASIC) chip. The chip had a small area of 2.4 × 2.4 mm2, therefore a miniaturized NFC antenna was designed, whereas the screen-printed on-substrate antennas had an area of 35 × 51 mm2. This paper investigates the effects of different parameters such as conductor thickness and materials, double layering, and employing ferrite layers with different thicknesses on the performance of the on-chip antennas using full-wave simulations. The presence of a ferrite layer to increase the inductance of the antenna and mitigate the interactions with backplates has proven useful. The best performance was obtained via double-layering of the coils, which was similar to on-substrate antennas, while a size reduction of 99.68% was gained. Consequently, the coupling factors and maximum achievable power transmission efficiency of the on-chip antenna and on-substrate antenna were studied and compared.
Miniaturized On-Chip NFC Antenna versus Screen-Printed Antenna for the Flexible Disposable Sensor Strips
