Induction Machine Efficiency Evaluation Using the Finite Element Analysis Software and a New Mechanical Loss Formula

Wave Maker

According to uncertainty of the design parameters for large span truss of installing wave-maker, in order to avoid the waste of materials,the truss is analyzed based on the finite element analysis software ANSYS to find out its weaknesses and various parts of the deformation. On the premise of ensuring the intensity and stiffness, the weight of the truss is reduced by adjusting its sizes and selecting different profiles, so as to achieve the optimization of the truss of installing wave-maker.

The Finite-Element Analysis of Cylindrical Helical Tooth Milling Cutter Based on Marc

10.4028/www.scientific.net/amm.52-54.1147 ◽

2011 ◽

Vol 52-54 ◽

pp. 1147-1152

Author(s):

Guang Guo Zhang ◽

Wei Jiang ◽

Hong Hua Zhang ◽

Huan Wang

Keyword(s):

Finite Element Analysis ◽

Finite Element ◽

Cutting Forces ◽

Element Model ◽

Local Deformation ◽

Analysis Software ◽

Element Analysis ◽

Milling Cutter ◽

Cutter Life ◽

The Finite Element Analysis

In the traditional designs of milling cutter, we cannot get the required accuracy of machining as there may be local deformation on the edges, even more the cutter can break down. Aiming at this situation, a finite-element model of straight pin milling cutter with helical tooth are built using Marc, a nonlinear finite-element analysis software, the different cutting forces of the milling cutter during the cutting process are analyzed and the cutting forces of the milling cutter at different parameters are studied. We get the stress, the strain and the temperature distribution of the milling cutter in different situation. Our work offer a theoretical basis of improving stress of the cutter, designing the structure of cutters reasonably and analyzing the cutter failure as well as a new method of analysis and calculation of the cutter life and strength.

Design of a New Piezo-Electric Micro-Gripper Based on Flexible Magnifying Mechanism

10.4028/www.scientific.net/amm.201-202.907 ◽

2012 ◽

Vol 201-202 ◽

pp. 907-911 ◽

Cited By ~ 5

Author(s):

Feng Yi Feng ◽

Yu Guo Cui ◽

Fei Xue ◽

Liang En Wu

Keyword(s):

Finite Element Analysis ◽

Finite Element ◽

Response Analysis ◽

Analysis Software ◽

Maximum Displacement ◽

Element Analysis ◽

Micro Gripper ◽

Harmonic Response Analysis ◽

Finger Tip

Based on the requirements of that the finger can move in parallel, and the displacement of the finger can be detected, the micro-gripper driven by piezoelectric actuator is designed based on the displacement amplification structure with the flexure hinge. The static analysis, the modal analysis, the harmonic response analysis and the transient response analysis of the micro-gripper are carried out by using the finite element analysis software ANSYS. The results of the finite element analysis show that the finger is fully able to move in parallel, and can detect the displacement of the finger; the maximum displacement of the finger is about 101 μm, the first natural frequency is about 130 Hz; the finger tip displacement under the 1 μm step input is about 20 μm, the fingertip vibration is about ±2 μm.

Finite Element Analysis of the Greenhouse Canopy Effect with Seismic Load

Advanced Materials Research ◽

10.4028/www.scientific.net/amr.368-373.1125 ◽

2011 ◽

Vol 368-373 ◽

pp. 1125-1129

Author(s):

Chang Jiang Liu ◽

Jin Long Wang

Keyword(s):

Finite Element Analysis ◽

Finite Element ◽

Seismic Analysis ◽

Element Model ◽

Seismic Load ◽

Analysis Software ◽

Element Analysis ◽

Canopy Effect ◽

The Finite Element Model

The finite element model about greenhouse canopy of seismic analysis was setted up, The finite element analysis software ANSYS was used to study structure displacement, stress analysis on greenhouse shed. The results showed that the dangerous part of the canopy were located on upper chord members,lower chord members, web members of the framework and the lower and upper, the inside of both sides of the wall with seismic load.Corresponding to this results ,the main destroied form were the framework damage caused by the bending deformation of upper chord members, lower chord members and the upper web members and the unstability caused by the distortion of both sides of the wall.

Engineering Analysis and Research on Connection Plate of Vehicle Radar Antenna Pedestal

10.4028/www.scientific.net/amm.271-272.883 ◽

2012 ◽

Vol 271-272 ◽

pp. 883-886

Author(s):

Feng Ji Chang ◽

Yu Jun Li ◽

Dong Yan ◽

Hai Bo Sun ◽

Yu Bin Wu ◽

...

Keyword(s):

Finite Element Analysis ◽

Finite Element ◽

Structure Characteristic ◽

Engineering Analysis ◽

Analysis Software ◽

Element Analysis ◽

Cast Aluminium ◽

Radar Antenna

According to the usage of vehicle radar antenna pedestal connection plate, this article analyzes and compares the structure characteristic of welding and casting. We decide to adopt the casting structure and use cast aluminium ZL101A. Based on the connection plate of using conditions, we analyze the deformation and stress of connection plate by the finite element analysis software. The design is in line with the material allowable requirements and to meet the requirements of the system stiffness.

The Validation of Computational FE Software for Creep Damage Mechanics

Advanced Materials Research ◽

10.4028/www.scientific.net/amr.744.205 ◽

2013 ◽

Vol 744 ◽

pp. 205-210 ◽

Cited By ~ 1

Author(s):

De Zheng Liu ◽

Qiang Xu ◽

Zhong Yu Lu ◽

Dong Lai Xu ◽

Feng Tan

Keyword(s):

Finite Element Analysis ◽

Finite Element ◽

Damage Mechanics ◽

Creep Damage ◽

Analysis Method ◽

Analysis Software ◽

Element Analysis ◽

Preliminary Validation ◽

Stress Plane

The preliminary validation of in-house finite element analysis software for creep damage mechanics is reported. The Finite Element Analysis Method and the programme strcuture for creep damage problem were reported elsewhere and the validation conducted so far include plane stress, plane strain, and axisymmetric cases. Furture work is also outlined.

Finite Element Analysis of 2-DOF Positioning Stage with a Gas Bearing Based on ANSYS

Advanced Materials Research ◽

10.4028/www.scientific.net/amr.1056.149 ◽

2014 ◽

Vol 1056 ◽

pp. 149-153

Author(s):

Xiao Long Zhang ◽

Zhi Wei Lu ◽

Bo Liu ◽

Jun An Zhang

Keyword(s):

Finite Element Analysis ◽

Finite Element ◽

Analysis Software ◽

Element Analysis ◽

Maximum Deformation ◽

Work Surface ◽

Positioning Stage ◽

Decoupling Mechanism ◽

Gas Bearing

In order to reach the requirements of the newest generation of wire bonder, gas bearing positioning stage directly driven by voice coil actuators is designed.In the stage,an air decoupling mechanism is used. And the finite element analysis software ANSYS was used to analyze the static and dynamic characterizes of the stage so that the structure meets the requirement of stiffness,and at the same time,the moving parts are as light as possible. The simulated results show that the maximum deformation of work platform is in the work surface and the deformation is in request scope.,the deformation of decoupling mechanism is in the main driving rod contact, but this has a little influence on the stage.

The Finite Element Analysis of Tension and Compression Condition of Diesel Engine Connecting Rod

10.4028/www.scientific.net/amm.722.120 ◽

2014 ◽

Vol 722 ◽

pp. 120-124 ◽

Cited By ~ 1

Author(s):

Gang Chen ◽

Lei Wu ◽

Long Wu ◽

Pei Qing Xie

Keyword(s):

Finite Element Analysis ◽

Finite Element ◽

Diesel Engine ◽

Reference Value ◽

Production Cycle ◽

Connecting Rod ◽

Analysis Software ◽

Element Analysis ◽

Tension And Compression

In this paper, through the finite element analysis software ANSYS, analysis and research on the part drawing of the diesel engine connecting rod. Using pro/e modeling, introduce it into the finite element analysis software ANSYS for the finite element static analysis of the state of load on the connecting rod. Setting correct model, partitioning appropriate mesh, and setting a reasonable process solution, it can generate visual stress nephogram to facilitate access to important data and intuitive understanding. There is a certain reference value to guide the practical production and shorten the production cycle of the product.

The Simulation of Rolling Process of Wire with Y-Type Roller

10.4028/www.scientific.net/amm.602-605.709 ◽

2014 ◽

Vol 602-605 ◽

pp. 709-712

Author(s):

Jin Hong Ma ◽

Bin Tao ◽

Xiao Han Yao

Keyword(s):

Finite Element Analysis ◽

Finite Element ◽

Rolling Mill ◽

Three Dimensional ◽

Rolling Process ◽

Stress And Strain ◽

Analysis Software ◽

Element Analysis ◽

Three Dimensional Models

Y-Type rolling mill with three roller is a new kind of wire mill.The three-dimensional models of rolling are established by Pro/E. Based on the finite element analysis software ANSYS/LS-DYNA, the rolling process of wire by Y-type rollers is simulated. The rolling piece movement is analysed. Stress and strain of Y-type roller are also analysed.

Rack and Pinion Lifting Device Structural Design of Large-Scale Dynamic Sculpture

Materials Science Forum ◽

10.4028/www.scientific.net/msf.628-629.299 ◽

2009 ◽

Vol 628-629 ◽

pp. 299-304

Author(s):

C.Y. Lv ◽

W.W. Shi ◽

Xian Hai Yang

Keyword(s):

Finite Element Analysis ◽

Finite Element ◽

Structural Design ◽

Large Scale ◽

Analysis Software ◽

Element Analysis ◽

The Finite Element Analysis

The design of lifting device for a large-scale dynamic sculpture at tourist district was introduced. According to its own characteristics of lift device, the "back-to-back" style of rack and pinion for the lift system was designed. It was used the finite element analysis software to analyze the strength of the rack and pinion which is a key part of the lift device. According to the stress of dedendum for the pinion is too bad, it was proposed that increased the radius of the fillet for dedendum.