Experimental investigation on new absorption peaks of water vapor at high temperatures using terahertz spectroscopy

Author(s):  
Rachel Song ◽  
Zhenyou Wang ◽  
Jamie Loh ◽  
Murray J. Thomson
1966 ◽  
Vol 1 (2) ◽  
pp. 156-159
Author(s):  
P. P. Budnikov ◽  
M. A. Matveev ◽  
F. Ya. Kharitonov

CORROSION ◽  
1991 ◽  
Vol 47 (4) ◽  
pp. 272-280
Author(s):  
R. J. Walter ◽  
G. G. Bentle ◽  
W. T. Chandler

Abstract The results of an experimental investigation of the effect of water vapor/hydrogen environments on the mechanical properties of niobium, B-66 niobium alloy, tantalum, and Ta-10W alloy are presented. Tensile tests were conducted on specimens of these materials in water vapor/hydrogen environments with water vapor/hydrogen mixture ratios of 1 and 3. The water vapor/hydrogen environment caused strength reductions on tantalum and Ta—WW and ductility reductions on all four materials. The degree and causes of embrittlement were a complex function of temperature.


Author(s):  
Thanyawat Pothisiri ◽  
Pitcha Jongvivatsakul ◽  
Vanichapoom Nantavong

<p>The use of post‐installed rebars into existing reinforced concrete structures bonded with epoxy resins was constantly increasing due to the advantage of equivalent or even higher bearing capacities at service temperature, compared with conventional cast‐in‐place rebars. Previous studies have examined the effects of different parameters on the mechanical properties of bonded post‐installed rebars at normal temperature. These studies showed that, for rebar diameter equal to 10 mm, the load bearing capacity increases linearly with the embedment length up to 75 mm. However, upon exposure to high temperatures, the glass transition of epoxy resins may occur and affect the mechanical behaviour of the adhesive bond. Studying the mechanical behaviour of an adhesive anchor at high temperatures is therefore necessary. An experimental investigation is conducted herein to examine the characteristics of the adhesive bonding stress between steel rebar and concrete interface at elevated temperatures using a series of pull‐out tests with varying rebar diameters and embedment lengths.</p>


2014 ◽  
Vol 4 (6) ◽  
pp. 722-733 ◽  
Author(s):  
Hosein Bidgoli ◽  
Sergey Cherednichenko ◽  
Jens Nordmark ◽  
Henrik Thunman ◽  
Martin Seemann

2005 ◽  
Vol 475-479 ◽  
pp. 233-236 ◽  
Author(s):  
Kaneaki Tsuzaki ◽  
Fu Gao Wei

Hydrogen absorption of incoherent TiC particles that were once reported to be strong hydrogen traps in iron at room temperature was investigated by means of thermal desorption spectrometry (TDS). The results indicated that incoherent TiC particles in iron do not trap hydrogen at all at room temperature even they are cathodically charged for a long time. Only at high temperatures and in atmosphere containing hydrogen source, incoherent TiC particles can trap hydrogen. The origin of hydrogen trapped by incoherent TiC particles was justified to be water vapor in the atmosphere during heat treatment.


Sign in / Sign up

Export Citation Format

Share Document