A Strongly Non-Intrusive Methodology to Monitor and Detect Anomalous Behaviour of Wireless Devices

Author(s):  
Abdurhman Albasir ◽  
Kshirasagar Naik ◽  
Ricardo Manzano ◽  
Parth Shah ◽  
Nitin Naik
Author(s):  
Mukesh Mahajan ◽  
Astha Dubey ◽  
Samruddhi Desai ◽  
Kaveri Netawate

This paper reviews basically about Bluetooth based home automation system. It is controlled by PIC microcontroller. Home automation can be defined as the ability to perform tasks automatically and monitor or change status remotely. These include tasks such as turning off lights in the room, locking doors via smartphone, automate air condition systems and appliances which help in the kitchen. Now a days several wireless devices are available such as Bluetooth, Zigbee and GSM. Since Bluetooth is low in cost than the other two and hence is used more. In this paper we have described the methods of automating different home appliances using Bluetooth and pic microcontroller. Different sensors are involved in this system to advance and make it smarter. Sensors such as temperature sensor, liquid sensors, humidity sensor etc. can be used.


2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Roberto Rodriguez-Zurrunero ◽  
Ramiro Utrilla ◽  
Elena Romero ◽  
Alvaro Araujo

Wireless Sensor Networks (WSNs) are a growing research area as a large of number portable devices are being developed. This fact makes operating systems (OS) useful to homogenize the development of these devices, to reduce design times, and to provide tools for developing complex applications. This work presents an operating system scheduler for resource-constraint wireless devices, which adapts the tasks scheduling in changing environments. The proposed adaptive scheduler allows dynamically delaying the execution of low priority tasks while maintaining real-time capabilities on high priority ones. Therefore, the scheduler is useful in nodes with rechargeable batteries, as it reduces its energy consumption when battery level is low, by delaying the least critical tasks. The adaptive scheduler has been implemented and tested in real nodes, and the results show that the nodes lifetime could be increased up to 70% in some scenarios at the expense of increasing latency of low priority tasks.


Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1781
Author(s):  
Manuel Lozano-García ◽  
Luis Estrada-Petrocelli ◽  
Abel Torres ◽  
Gerrard F. Rafferty ◽  
John Moxham ◽  
...  

This study aims to investigate noninvasive indices of neuromechanical coupling (NMC) and mechanical efficiency (MEff) of parasternal intercostal muscles. Gold standard assessment of diaphragm NMC requires using invasive techniques, limiting the utility of this procedure. Noninvasive NMC indices of parasternal intercostal muscles can be calculated using surface mechanomyography (sMMGpara) and electromyography (sEMGpara). However, the use of sMMGpara as an inspiratory muscle mechanical output measure, and the relationships between sMMGpara, sEMGpara, and simultaneous invasive and noninvasive pressure measurements have not previously been evaluated. sEMGpara, sMMGpara, and both invasive and noninvasive measurements of pressures were recorded in twelve healthy subjects during an inspiratory loading protocol. The ratios of sMMGpara to sEMGpara, which provided muscle-specific noninvasive NMC indices of parasternal intercostal muscles, showed nonsignificant changes with increasing load, since the relationships between sMMGpara and sEMGpara were linear (R2 = 0.85 (0.75–0.9)). The ratios of mouth pressure (Pmo) to sEMGpara and sMMGpara were also proposed as noninvasive indices of parasternal intercostal muscle NMC and MEff, respectively. These indices, similar to the analogous indices calculated using invasive transdiaphragmatic and esophageal pressures, showed nonsignificant changes during threshold loading, since the relationships between Pmo and both sEMGpara (R2 = 0.84 (0.77–0.93)) and sMMGpara (R2 = 0.89 (0.85–0.91)) were linear. The proposed noninvasive NMC and MEff indices of parasternal intercostal muscles may be of potential clinical value, particularly for the regular assessment of patients with disordered respiratory mechanics using noninvasive wearable and wireless devices.


Author(s):  
Ashwini Kotrashetti ◽  
B. K Lande ◽  
Ajay Poddar

Abstract Conventional multiband antennas suffer from strong interactions among different operating frequencies, complex configurations, low bandwidth, and reduced efficiencies. A design concept for a multibeam multiband antenna in wireless devices is proposed in this paper. The design concept provides a promising approach to augment transmission and reception. The principle of design involves a primary radiating element embedded in a triplate conformation which excites a passive array of multiple frequency secondary radiators, forming a frequency selective structure in triplate (FSST). The higher order mode behavior of the parent antenna characterizes the design of FSST placed in its nearfield. The mathematical modeling and analysis of the design methodology is also presented. As proof of concept, the proposed design methodology is validated with simulations and experiments at four unlicensed communication bands and the results are compared.


2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Dong-Uk Sim ◽  
Sang Il Kwak ◽  
Jong Hwa Kwon ◽  
Seong-Ook Park

This paper proposes a reverberation chamber structure consisting of new reflectors and mode stirrers for electromagnetic compatibility and wireless terminal measurements. The key design considerations for them are determined through a reasonable approach to analyze the eigenmode for a reverberation chamber and the standard deviation of its working volume based on 3D simulation. The final designs are expected to improve the standard deviation performance of the initial structure of the reverberation chamber and provide a better mode stirring environment. The results measured in the fabricated chamber demonstrate that these predictions are clearly realized. The results satisfy the main requirements of this paper, which are defined in consideration of the specifications of commercial reverberation chamber products. Therefore, the reverberation chamber of this paper is expected to be useful for performance measurement and evaluation of commercial wireless terminals. To verify this logical approach to obtain a good design and its results, the results measured in the actual fabricated reverberation chamber are described along with analytical and computational results.


Sign in / Sign up

Export Citation Format

Share Document