Frequency Dependence of Phase Speed, Group Speed, and Attenuation in Water-Saturated Sand: Laboratory Experiments

2008 ◽  
Vol 33 (4) ◽  
pp. 359-366 ◽  
Author(s):  
J.-P. Sessarego ◽  
A.N. Ivakin ◽  
D. Ferrand
2021 ◽  
Author(s):  
Daniel K. Whiter ◽  
Hanna Dahlgren ◽  
Betty S. Lanchester ◽  
Joshua Dreyer ◽  
Noora Partamies ◽  
...  

Abstract. Fragmented Aurora-like Emissions (FAEs) are small (few km) optical structures which have been observed close to the poleward boundary of the aurora from the high-latitude location of Svalbard (magnetic latitude 75.3 ° N). The FAEs are only visible in certain emissions and their shape has no magnetic-field aligned component, suggesting that they are not caused by energetic particle precipitation and are therefore not aurora in the normal sense of the word. The FAEs sometimes form wave-like structures parallel to an auroral arc, with regular spacing between each FAE. They drift at a constant speed and exhibit internal dynamics moving at a faster speed than the envelope structure. The formation mechanism of FAEs is currently unknown. We present an analysis of high-resolution optical observations of FAEs made during two separate events. Based on their appearance and dynamics we make the assumption that the FAEs are a signature of a dispersive wave in the lower E-region ionosphere, co-located with enhanced electron and ion temperatures detected by incoherent scatter radar. Their drift speed (group speed) is found to be 580–700 m s−1 and the speed of their internal dynamics (phase speed) is found to be 2200–2500 m s−1, both for an assumed altitude of 100 km. The speeds are similar for both events which are observed during different auroral conditions. We consider two possible waves which could produce the FAEs, electrostatic ion cyclotron waves and Farley-Buneman waves, and find that the observations could be consistent with either wave under certain assumptions. In the case of EIC waves the FAEs must be located at an altitude above about 140 km, and our measured speeds scaled accordingly. In the case of Farley-Buneman waves a very strong electric field of about 365 mV m−1 is required to produce the observed speeds of the FAEs; such a strong electric field may be a requirement for FAEs to occur.


2021 ◽  
Vol 39 (6) ◽  
pp. 975-989
Author(s):  
Daniel K. Whiter ◽  
Hanna Sundberg ◽  
Betty S. Lanchester ◽  
Joshua Dreyer ◽  
Noora Partamies ◽  
...  

Abstract. Fragmented aurora-like emissions (FAEs) are small (few kilometres) optical structures which have been observed close to the poleward boundary of the aurora from the high-latitude location of Svalbard (magnetic latitude 75.3 ∘N). The FAEs are only visible in certain emissions, and their shape has no magnetic-field-aligned component, suggesting that they are not caused by energetic particle precipitation and are, therefore, not aurora in the normal sense of the word. The FAEs sometimes form wave-like structures parallel to an auroral arc, with regular spacing between each FAE. They drift at a constant speed and exhibit internal dynamics moving at a faster speed than the envelope structure. The formation mechanism of FAEs is currently unknown. We present an analysis of high-resolution optical observations of FAEs made during two separate events. Based on their appearance and dynamics, we make the assumption that the FAEs are a signature of a dispersive wave in the lower E-region ionosphere, co-located with enhanced electron and ion temperatures detected by incoherent scatter radar. Their drift speed (group speed) is found to be 580–700 m s−1, and the speed of their internal dynamics (phase speed) is found to be 2200–2500 m s−1, both for an assumed altitude of 100 km. The speeds are similar for both events which are observed during different auroral conditions. We consider two possible waves which could produce the FAEs, i.e. electrostatic ion cyclotron waves (EIC) and Farley–Buneman waves, and find that the observations could be consistent with either wave under certain assumptions. In the case of EIC waves, the FAEs must be located at an altitude above about 140 km, and our measured speeds scaled accordingly. In the case of Farley–Buneman waves a very strong electric field of about 365 mV m−1 is required to produce the observed speeds of the FAEs; such a strong electric field may be a requirement for FAEs to occur.


2015 ◽  
Vol 529 ◽  
pp. 182-190 ◽  
Author(s):  
Xinyao Yang ◽  
Ziyi Yin ◽  
Fangmin Chen ◽  
Jingjing Hu ◽  
Yuesuo Yang

Geophysics ◽  
2021 ◽  
pp. 1-38
Author(s):  
Timothy Larson ◽  
Zuze Dulanya ◽  
Evance Mwathunga

Choosing the site for a new water well in rural southern Malawi is essentially a political process with competing priorities and stakeholders. For a new well (or borehole) to be sustainably used and maintained, the relevant stakeholders must be fully engaged in the siting process and given meaningful responsibility for the final siting decision. However, without sound technical information, a siting decision based solely on stakeholder priorities such as proximity to the headman’s compound or accessibility to the center of population, may not result in a satisfactory borehole. Instead, in addition to stakeholder interests, we used a process that includes electrical resistivity tomography (ERT) as a tool to guide and constrain the local decision-making process. Within the region of the crystalline-basement aquifer, ERT profiles indicate variations in weathering thickness, hence aquifer storage. In a lacustrine setting, the ERT profile delineated a zone of moderately large resistivity associated with a deposit of fresh-water saturated sand. This ERT-derived technical information becomes one element in a comprehensive sociotechnical approach to the location of sustainable water resources. We used this sociotechnical approach to complete boreholes for all four villages in our project and have a high confidence that the villagers will be motivated to use and maintain these resources.


2019 ◽  
Vol 89 ◽  
pp. 02008
Author(s):  
Mojtaba Shakerian ◽  
Armin Afrough ◽  
Sarah Vashaee ◽  
Florin Marica ◽  
Yuechao Zhao ◽  
...  

Methane hydrate deposits world-wide are promising sources of natural gas. Magnetic Resonance Imaging (MRI) has proven useful in previous studies of hydrate formation. In the present work, methane hydrate formation in a water saturated sand pack was investigated employing an MRI-compatible metallic core holder at low magnetic field with a suite of advanced MRI methods developed at the UNB MRI Centre. The new MRI methods are intended to permit observation and quantification of residual fluids in the pore space as hydrate forms. Hydrate formation occurred in the water-saturated sand at 1500 psi and 4 °C. The core holder has a maximum working pressure of 4000 psi between -28 and 80 °C. The heat-exchange jacket enclosing the core holder enabled very precise control of the sample temperature. A pure phase encode MRI technique, SPRITE, and a bulk T1-T2 MR method provided high quality measurements of pore fluid saturation. Rapid 1D SPRITE MRI measurements time resolved the disappearance of pore water and hence the growth of hydrate in the sand pack. 3D π-EPI images confirmed that the residual water was inhomogeneously distributed along the sand pack. Bulk T1-T2 measurements discriminated residual water from the pore gas during the hydrate formation. A recently published local T1-T2 method helped discriminate bulk gas from the residual fluids in the sample. Hydrate formation commenced within two hours of gas supply. Hydrate formed throughout the sand pack, but maximum hydrate was observed at the interface between the gas pressure head and the sand pack. This irregular pattern of hydrate formation became more uniform over 24 hours. The rate of hydrate formation was greatest in the first two hours of reaction. An SE-SPI T2 map showed the T2 distribution changed considerably in space and time as hydrate formation continued. Changes in the T2 distribution are interpreted as pore level changes in residual water content and environment.


Sign in / Sign up

Export Citation Format

Share Document