Comparison between three-phase structures of two and three branches with ancillary services capabilities in type-3 wind turbines: NPC topology

2017 ◽  
Author(s):  
Ernande Eugenio C. Morais ◽  
Francisco Kleber de A. Lima ◽  
Carlos Gustavo C. Branco
Keyword(s):  
Wind Turbines ◽  
Ancillary Services ◽  
Phase Structures ◽  
Three Phase ◽  
Type 3

scholarly journals Frequency Scan–Based Mitigation Approach of Subsynchronous Control Interaction in Type-3 Wind Turbines

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4626
Author(s):  
Faris Alatar ◽  
Ali Mehrizi-Sani
Keyword(s):  
Wind Turbines ◽  
Wind Farm ◽  
Operating Conditions ◽  
Steady State Operation ◽  
Significant Damage ◽  
Frequency Scan ◽  
Type 3 ◽  
Phase Angles ◽  
Wind Energy Resources ◽  
Control Interaction

Integration of wind energy resources into the grid creates several challenges for power system dynamics. More specifically, Type-3 wind turbines are susceptible to subsynchronous control interactions (SSCIs) when they become radially connected to a series-compensated transmission line. SSCIs can cause disruptions in power generation and can result in significant damage to wind farm (WF) components and equipment. This paper proposes an approach to mitigate SSCIs using an online frequency scan, with optimized phase angles of voltage harmonic injection to maintain steady-state operation, to modify the controllers or the operating conditions of the wind turbine. The proposed strategy is simulated in PSCAD/EMTDC software on the IEEE second benchmark model for subsynchronous resonance. Simulation results demonstrate the effectiveness of this strategy by ensuring oscillations do not grow.

scholarly journals Fault-Ride Trough Validation of IEC 61400-27-1 Type 3 and Type 4 Models of Different Wind Turbine Manufacturers

Energies ◽  
2019 ◽  
Vol 12 (16) ◽  
pp. 3039 ◽  
Author(s):  
Andrés Honrubia-Escribano ◽  
Francisco Jiménez-Buendía ◽  
Jorge Luis Sosa-Avendaño ◽  
Pascal Gartmann ◽  
Sebastian Frahm ◽  
...  
Keyword(s):  
Power Systems ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Transient Stability ◽  
Dynamic Models ◽  
Variable Speed ◽  
Generic Models ◽  
Voltage Dip ◽  
Converter Topology ◽  
Type 3

The participation of wind power in the energy mix of current power systems is progressively increasing, with variable-speed wind turbines being the leading technology in recent years. In this line, dynamic models of wind turbines able to emulate their response against grid disturbances, such as voltage dips, are required. To address this issue, the International Electronic Commission (IEC) 61400-27-1, published in 2015, defined four generic models of wind turbines for transient stability analysis. To achieve a widespread use of these generic wind turbine models, validations with field data are required. This paper performs the validation of three generic IEC 61400-27-1 variable-speed wind turbine model topologies (type 3A, type 3B and type 4A). The validation is implemented by comparing simulation results with voltage dip measurements performed on six different commercial wind turbines based on field campaigns conducted by three wind turbine manufacturers. Both IEC validation approaches, the play-back and the full system simulation, were implemented. The results show that the generic full-scale converter topology is accurately adjusted to the different real wind turbines and, hence, manufacturers are encouraged to the develop generic IEC models.

Modeling of Type 3 Wind Turbines With df/dt Inertia Control for System Frequency Response Study

2017 ◽  
Vol 32 (4) ◽  
pp. 2799-2809 ◽  
Author(s):  
Jiabing Hu ◽  
Li Sun ◽  
Xiaoming Yuan ◽  
Shuo Wang ◽  
Yongning Chi
Keyword(s):  
Frequency Response ◽  
Wind Turbines ◽  
Inertia Control ◽  
Type 3 ◽  
System Frequency

scholarly journals An Improved T-type Switched-Capacitor Based 3-level 3-Phase Inverter with Common Mode Voltage Elimination and Voltage Boosting Capability

2021 ◽  
Author(s):  
Arpan Hota ◽  
sumon dhara ◽  
venu sonti ◽  
sachin jain ◽  
Vivek Agarwal
Keyword(s):  
Modulation Depth ◽  
Voltage Source ◽  
Switched Capacitor ◽  
Common Mode ◽  
Common Mode Voltage ◽  
Three Phase ◽  
Level 3 ◽  
Space Vectors ◽  
Vector Modulation ◽  
Type 3

<p>Zero common mode voltage (ZCMV) space vector modulation (SVM) strategy applied to a three-phase multilevel inverter (MLI) eliminates the common mode voltage (CMV). However, the usage of ZCMV-SVM strategy reduces the number of levels in the output voltage and requires higher magnitude dc voltage source due to the reduced modulation depth of the employed PWM scheme. Moreover, the usage of a single dc-source in such systems may have issues with respect to capacitor voltage balancing. Taking into account all the above issues, a 3-level inverter solution is proposed in this manuscript. The complete details of the method used for developing the proposed solution using the ZCMV space vectors is also included in this paper. The proposed topology utilizes a unique combination of a T-type 3-level inverter and a switched-capacitor (SC) circuit to achieve ZCMV performance with a single dc-source of low magnitude at a reduced component count. Analysis of the CMV and terminal voltages along with the design of the SCs are presented in this paper. The proposed topology is compared with the existing topologies to prove its unique merits over the other 3LI solutions with ZCMV capability. All the claims are validated using simulation and experimental results.</p>

Sign in / Sign up

Export Citation Format

Share Document