An Ultrasound Probe Holder for Image-Guided Robot-Assisted Prostate Brachytherapy

Author(s):  
Basem Yousef ◽  
Rajni Patel ◽  
Mehrdad Moallem
Author(s):  
Ghassan Hamarneh ◽  
Alborz Amir-Khalili ◽  
Masoud S. Nosrati ◽  
Ivan Figueroa ◽  
Jeremy Kawahara ◽  
...  

Robotica ◽  
2009 ◽  
Vol 28 (2) ◽  
pp. 215-234 ◽  
Author(s):  
Andrew A. Goldenberg ◽  
John Trachtenberg ◽  
Yang Yi ◽  
Robert Weersink ◽  
Marshall S. Sussman ◽  
...  

SUMMARYThis paper reports on recent progress made toward the development of a new magnetic resonance imaging (MRI)-compatible robot-assisted surgical system for closed-bore image-guided prostatic interventions: thermal ablation, radioactive seed implants (brachytherapy), and biopsy. Each type of intervention will be performed with a different image-guided, robot-based surgical tool mounted on the same MRI-guided robot through a modular trocar. The first stage of this development addresses only laser-based focal ablation. The robot mechanical structure, modular surgical trocar, control architecture, and current stage of performance evaluation in the MRI environment are presented. The robot actuators are ultrasonic motors. A methodology of using such motors in the MRI environment is presented. The robot prototype with surgical ablation tool is undergoing tests on phantoms in the MRI bore. The tests cover MRI compatibility, image visualization, robot accuracy, and thermal mapping. To date, (i) the images are artifact- and noise-free for certain scanning pulse sequences; (ii) the robot tip positioning error is less than 1.2 mm even at positions closer than 0.3 m from the MRI isocenter; (iii) penetration toward the target is image-monitored in near-real time; and (iv) thermal ablation and temperature mapping are achieved using a laser delivered on an optical fiber and MRI, respectively.


Author(s):  
Smruti Mahapatra ◽  
Tarana Parvez Kaovasia ◽  
Sufia Ainechi ◽  
Ana Ainechi ◽  
Molly Acord ◽  
...  

Abstract Standard diagnostic ultrasound imaging procedures heavily rely on a sonographer for image acquisition. Given the ultrasound probe is manually manipulated by the sonographer, there is a potential for noise artifacts like blurry acquired images caused by involuntary hand movements. Certain surgical procedures can also cause patients to exhibit involuntary “jumping” movements while on the operating table leading to further deterioration in ultrasound image quality. In this study, we attempt to mitigate these problems by fabricating a 3D-printed ultrasound probe holder. Due to the lightweight nature of the device, it can attach to surgical retractors without influencing the functionality of the retractor. Therefore, the 3D printed probe holder not only reduces relative motion between the probe and the patient, but also reduce the need for a sonographer during complex surgeries.


2015 ◽  
Vol 10 (12) ◽  
pp. 1905-1913 ◽  
Author(s):  
Philip Pratt ◽  
Alexander Jaeger ◽  
Archie Hughes-Hallett ◽  
Erik Mayer ◽  
Justin Vale ◽  
...  

2010 ◽  
Vol 38 (1) ◽  
pp. 96-106 ◽  
Author(s):  
Tarun K. Podder ◽  
Ivan Buzurovic ◽  
Ke Huang ◽  
Timothy Showalter ◽  
Adam P. Dicker ◽  
...  

2021 ◽  
Vol 103 (4) ◽  
Author(s):  
Shijie Zhu ◽  
Zhe Zhao ◽  
Yu Chen ◽  
Jiuzheng Deng ◽  
Bicong Zhang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document