Effects of Sudden Increase of Dynamic Loads on the Voltage Stability of South China Power Grid and Solutions with STATCOM Application

2005 ◽  
Author(s):  
Hu Ai-jun ◽  
Cui Wen-jin
Keyword(s):  
South China ◽  
Voltage Stability ◽  
Power Grid ◽  
Dynamic Loads ◽  
Sudden Increase

scholarly journals Voltage Stability of Power Systems with Renewable-Energy Inverter-Based Generators: A Review

Electronics ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 115
Author(s):  
Nasser Hosseinzadeh ◽  
Asma Aziz ◽  
Apel Mahmud ◽  
Ameen Gargoom ◽  
Mahbub Rabbani
Keyword(s):  
Renewable Energy ◽  
Power Systems ◽  
Voltage Stability ◽  
Reactive Power ◽  
Power Grid ◽  
Renewable Energy Sources ◽  
Electrical Power ◽  
System Stability ◽  
Special Issue ◽  
Synchronous Generators

The main purpose of developing microgrids (MGs) is to facilitate the integration of renewable energy sources (RESs) into the power grid. RESs are normally connected to the grid via power electronic inverters. As various types of RESs are increasingly being connected to the electrical power grid, power systems of the near future will have more inverter-based generators (IBGs) instead of synchronous machines. Since IBGs have significant differences in their characteristics compared to synchronous generators (SGs), particularly concerning their inertia and capability to provide reactive power, their impacts on the system dynamics are different compared to SGs. In particular, system stability analysis will require new approaches. As such, research is currently being conducted on the stability of power systems with the inclusion of IBGs. This review article is intended to be a preface to the Special Issue on Voltage Stability of Microgrids in Power Systems. It presents a comprehensive review of the literature on voltage stability of power systems with a relatively high percentage of IBGs in the generation mix of the system. As the research is developing rapidly in this field, it is understood that by the time that this article is published, and further in the future, there will be many more new developments in this area. Certainly, other articles in this special issue will highlight some other important aspects of the voltage stability of microgrids.

Analysis of Power Grid Voltage Stability with High Penetration of Solar PV Systems

2021 ◽  
pp. 1-1
Author(s):  
Sharmin Rahman ◽  
Sajeeb Saha ◽  
Shama Naz Islam ◽  
M Arif ◽  
Mehdi Mosadeghy ◽  
...  
Keyword(s):  
Voltage Stability ◽  
Power Grid ◽  
Solar Pv ◽  
Grid Voltage ◽  
Pv Systems ◽  
High Penetration

scholarly journals Impact of the Generation System Parameters on the Frequency Response of the Power System: A UK Grid Case Study

Electricity ◽  
2021 ◽  
Vol 2 (2) ◽  
pp. 143-157
Author(s):  
Jovi Atkinson ◽  
Ibrahim M. Albayati
Keyword(s):  
Power System ◽  
Frequency Response ◽  
Power Grid ◽  
Sudden Increase ◽  
Generation System ◽  
System Parameters ◽  
Primary Frequency ◽  
Primary Frequency Response ◽  
The Impact ◽  
System Inertia

The operation and the development of power system networks introduce new types of stability problems. The effect of the power generation and consumption on the frequency of the power system can be described as a demand/generation imbalance resulting from a sudden increase/decrease in the demand and/or generation. This paper investigates the impact of a loss of generation on the transient behaviour of the power grid frequency. A simplified power system model is proposed to examine the impact of change of the main generation system parameters (system inertia, governor droop setting, load damping constant, and the high-pressure steam turbine power fraction), on the primary frequency response in responding to the disturbance of a 1.32 GW generation loss on the UK power grid. Various rates of primary frequency responses are simulated via adjusting system parameters of the synchronous generators to enable the controlled generators providing a fast-reliable primary frequency response within 10 s after a loss of generation. It is concluded that a generation system inertia and a governor droop setting are the most dominant parameters that effect the system frequency response after a loss of generation. Therefore, for different levels of generation loss, the recovery rate will be dependent on the changes of the governor droop setting values. The proposed model offers a fundamental basis for a further investigation to be carried on how a power system will react during a secondary frequency response.

Reactive Power Loss Index for Identification of Weak Nodes and Reactive Compensation Analysis to Improve Steady State Voltage Stability

2020 ◽  
pp. 177-237
Author(s):  
Tukaram Moger ◽  
Thukaram Dhadbanjan
Keyword(s):  
Steady State ◽  
Power Loss ◽  
Voltage Stability ◽  
Reactive Power ◽  
Power Grid ◽  
Southern Region ◽  
Equivalent System ◽  
Reactive Compensation ◽  
Simulation Results ◽  
Loss Index

This chapter presents a new reactive power loss index for identification of weak buses in the system. This index can be used for identification of weak buses in the systems. The new reactive power loss index is illustrated on sample 5-bus system, and tested on sample 10-bus equivalent system and 72-bus equivalent system of Indian southern region power grid. The validation of the weak buses identification from the reactive power loss index with that from other existing methods in the literature is carried out to demonstrate the effectiveness of the index. Simulation results show that the identification of weak buses in the system from the new reactive power loss index is completely non-iterative, and thus requires minimal computational efforts as compared with other existing methods in the literature.

scholarly journals A Preventive Strategy of Voltage Stability based on Characteristic Analysis

2019 ◽  
Vol 115 ◽  
pp. 01001
Author(s):  
Zhen Hu ◽  
Ding Wang ◽  
Yangwu Shen ◽  
Daojun Chen ◽  
Yongyan Liu
Keyword(s):  
Control Strategy ◽  
Power Supply ◽  
Prevention And Control ◽  
Voltage Stability ◽  
Power Grid ◽  
Preventive Strategy ◽  
Characteristic Analysis ◽  
Node Voltage ◽  
And Control ◽  
The Impact

The purpose of voltage stability prevention and control strategy is to minimize the impact of expected accidents on the whole power grid while ensuring safe power supply. In this paper, it is expected that the accident has a large impact on the system voltage and makes the voltage margin of each node low. in order to not only adjust the node voltage, but also reduce the disturbance impact, a voltage stability prevention and control strategy is proposed based on the characteristic analysis.

Sign in / Sign up

Export Citation Format

Share Document