Feeding structure influence on side lobe suppression of printed antenna array with parallel reflector

2015 ◽  
Author(s):  
Marija Milijic ◽  
Aleksandar Nesic ◽  
Bratislav Milovanovic ◽  
Nebojsa Doncov ◽  
Ivana Radnovic
Keyword(s):  
Antenna Array ◽  
Side Lobe ◽  
Printed Antenna ◽  
Feeding Structure ◽  
Side Lobe Suppression

scholarly journals Printed Antenna Arrays with High Side Lobe Suppression

2008 ◽  
Vol 2008 ◽  
pp. 1-6
Author(s):  
Aleksandar Nešić ◽  
Ivana Radnović ◽  
Zoran Mićić
Keyword(s):  
Antenna Array ◽  
Antenna Arrays ◽  
Low Cost ◽  
Microwave Circuits ◽  
Side Lobe ◽  
Printed Antenna ◽  
Feed Network ◽  
New Type ◽  
Side Lobe Suppression ◽  
Better Than

The problem of side lobe suppression (SLS) in printed antenna arrays has been investigated in the paper. Influence of several factors that make difficult design and realization of antenna arrays with relatively high SLS has been analyzed. We introduced a new type of printed antenna array with symmetrical pentagonal dipoles and symmetrical tapered feed network with Chebyshev distribution enabling SLS better than 34 dB in E-plane. Agreement between simulated and measured results is very good. The antenna is suitable for integration with other microwave circuits. Presented antenna is low cost and very simple for realization.

scholarly journals An investigation of side lobe suppression in integrated printed antenna structures with 3D reflectors

2017 ◽  
Vol 30 (3) ◽  
pp. 391-402
Author(s):  
Marija Milijic ◽  
Aleksandar Nesic ◽  
Bratislav Milovanovic
Keyword(s):  
Antenna Array ◽  
Radiation Pattern ◽  
Antenna Arrays ◽  
Amplitude Distribution ◽  
Side Lobe ◽  
Printed Antenna ◽  
Side Lobe Suppression

The paper discusses the problem of side lobe suppression in the radiation pattern of printed antenna arrays with different 3D reflector surfaces. The antenna array of eight symmetrical pentagonal dipoles with corner reflectors of various angles is examined. All investigated antenna arrays are fed by the same feeding network of impedance transformers enabling necessary amplitude distribution. Considering the different reflector surfaces, the influence of parasitic radiation from feeding network on side lobe suppression is studied to prevent the reception of unwanted noise and to increase a gain.

scholarly journals Definition of the border between the far and near field zone for printed antenna arrays with high side lobe suppression

2013 ◽  
Vol 10 (1) ◽  
pp. 113-124
Author(s):  
Marija Milijic ◽  
Aleksandar Nesic ◽  
Bratislav Milovanovic
Keyword(s):  
Antenna Arrays ◽  
Near Field ◽  
Side Lobe ◽  
Printed Antenna ◽  
Field Zone ◽  
High Side ◽  
Radiating Element ◽  
Limited Application ◽  
Definition Of ◽  
Side Lobe Suppression

The paper defines the border between the far and near field zone of printed antenna arrays. The conventional definition has a limited application in side lobe suppression measurements, especially in the case of high side lobe suppression. The paper particularly details the printed antenna array with 8 radiation elements. Its symmetrical tapered feed network with Chebyshev distribution enables side lobe suppression greater than -44 dB in the E-plane. In addition, the influence of tolerances in the standard photolithographic process has been investigated. The expected tolerances in the standard photolithographic process have been assumed with moderate precision in order to estimate the side lobe suppression degradation due to amplitude and phase deviations, as well as deviations to optimized values in radiating element positioning.

Switched ring antenna array with electronic scanning

Antennas ◽  
2021 ◽  
Author(s):  
V. M. Gavrilov ◽  
R. N. Glukhov ◽  
V. K. Dementiev ◽  
N. N. Korneeva
Keyword(s):  
Antenna Array ◽  
Antenna Arrays ◽  
Side Lobe ◽  
Directional Pattern ◽  
Base Station ◽  
Main Lobe ◽  
Printed Antenna ◽  
Frequency Range ◽  
Beam Position ◽  
Ring Antenna

For operation in the frequency range of 5,1–5,9 GHz, a directional antenna device has been developed for use as part of a base station in a stationary point-to-multipoint system with a controlled beam position. The antenna device is a switched, broadband, ring antenna array with electronic scanning in the azimuthal plane. Its distinctive feature is high gain of the radiating elements, which are used as linear printed antenna arrays with parallel power supply. The required directional characteristics and matching of the emitters have been achieved in the process of parametric synthesis carried out using the CST MS program. In a given frequency range, the emitters are characterized by the following parameters: width of the main lobe of the directional pattern in the E-plane is 6,6…7,5 deg; level of the first side lobe in the E-plane is 0…–11,4 dB; width of the main lobe of the directional pattern in the H-plane is 53,2…73,4 deg; level of the first side lobe in the H-plane is –23,4…–26,4 dB; gain is 17,0…17,5 dB; the reflection coefficient at the input of the emitters does not exceed 0,2. In the horizontal plane the main lobe of the directional pattern at different frequencies is shifted by an angle of 5–10 deg relative to the normal to the radiating opening of the emitters. The reason is a microstrip distributor combined with printed antenna array emitters on a common printed circuit board. The specified offset of the main lobe of the directional pattern does not decrease the functional characteristics of the antenna device, because the difference in level in the direction of the main maximum and in the direction normal to the radiating aperture of antenna arrays does not exceed 0,5 dB. In addition, the specified offset at the given frequency is regular and has the same value for all emitters of the ring antenna array. Therefore, the angular discret and the level of overlap of the directional patterns of the neighboring emitters when scanning in the azimuthal plane remain unchanged. The results of an experimental study of a prototype antenna device have been presented. They are in good agreement with the results of computer modeling.

Sign in / Sign up

Export Citation Format

Share Document