Full tensorial characterization of PZN-12%PT single crystal by resonant ultrasound spectroscopy

Author(s):  
T. Delaunay ◽  
E. Le Clezio ◽  
M. Guennou ◽  
H. Dammak ◽  
Mai Pham Thi ◽  
...  
2006 ◽  
Vol 321-323 ◽  
pp. 1576-1579
Author(s):  
Yong Moo Cheong ◽  
Young Suk Kim

Zirconium alloys are used for many applications in nuclear components, such as the pressure tube material in a pressurized heavy water reactor, nuclear fuel cladding, etc. One of the problems during the operation of a nuclear reactor is the degradation of the zirconium alloys, which is due to an increase of the hydrogen content in the zirconium alloy. Therefore a non-destructive determination of the hydrogen concentration in zirconium alloy is one of the important issues that need to be addressed. The resonant ultrasound spectroscopy (RUS) technique is evaluated for a characterization of the hydrogen concentration in Zr-2.5Nb alloy. Referring to the terminal solid solubility for dissolution (TSSD) of Zr-2.5Nb alloy, the plot of the mechanical damping coefficient (Q-1) versus the temperature or the deviation of the resonant frequency for the temperature (df/dT) versus the temperature was correlated for the hydrogen concentration in Zr-2.5Nb alloy. It was found that the temperature at an abrupt change of the slope can be correlated with the hydrogen concentration of the Zr-2.5Nb alloy.


Metals ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 1383
Author(s):  
Petr Sedlák ◽  
Michaela Janovská ◽  
Lucie Bodnárová ◽  
Oleg Heczko ◽  
Hanuš Seiner

We discuss the suitability of laser-based resonant ultrasound spectroscopy (RUS) for the characterization of soft shearing modes in single crystals of shape memory alloys that are close to the transition temperatures. We show, using a numerical simulation, that the RUS method enables the accurate determination of the c′ shear elastic coefficient, even for very strong anisotropy, and without being sensitive to misorientations of the used single crystal. Subsequently, we apply the RUS method to single crystals of three typical examples of shape memory alloys (Cu-Al-Ni, Ni-Mn-Ga, and NiTi), and discuss the advantages of using the laser-based contactless RUS arrangement for temperature-resolved measurements of elastic constants.


2008 ◽  
Vol 123 (5) ◽  
pp. 3691-3691
Author(s):  
François Deneuville ◽  
Marc Duquennoy ◽  
Mohammadi Ouaftouh ◽  
Frédéric Jenot ◽  
Mohamed Ourak ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document