EAO‐331 / OC‐PIB‐005 | Erythritol air polishing in the surgical resective treatment of peri‐implantitis: a RCT

Abstract Background Due to complex morphology and limited access, the cleaning of the furcation area is extremely challenging. Therefore, novel therapeutic approaches need to be tested to potentially overcome debridement limitations. The aim of the present prospective 12-month study was to compare clinical and microbiological effects following erythritol air-polishing versus conventional mechanical debridement of furcation defects in a cohort of periodontal maintenance patients. Methods Twenty patients with grade II mandibular molar furcation defects volunteered to enroll in this single-centre, examiner masked, randomized controlled trial. In a split-mouth study design, two furcation sites in each patient were randomly assigned to either receive subgingival debridement using erythritol air-polishing (test) or conventional ultrasonic/curette debridement (control) at baseline, and at 3, 6, 9 and 12 months. Probing depth, clinical attachment level and bleeding on probing were recorded at 3-month intervals. Subgingival microbiological samples obtained at baseline, 6 and 12 months were analyzed using checkerboard DNA–DNA hybridization. Discomfort from treatment was scored at 12 months using a visual analogue scale. The differences between treatments, and time-points, were tested using multilevel analysis (mixed effect models and robust variance estimates). Results A significant reduction in probing depth took place following both treatments (p < 0.001). Control sites experienced a significant mean gain in clinical attachment level of 0.5 mm (± 0.2) (p = 0.004), whereas a non-significant gain of 0.4 mm (± 0.3) was observed at test sites (p = 0.119). At 6 months, a significant between-treatment difference of 0.8 mm (± 0.4) was observed in favor of the control (p = 0.032). No significant between-treatment differences were observed in microbial load or composition. Notably, at 12 months patients experienced significantly less discomfort following air-polishing compared with control (p = 0.001). Conclusions The 12-month observations indicate that erythritol air-polishing and conventional mechanical debridement both support clinical improvements. A significant between-treatment difference in clinical attachment level was, however, detected in favour of control debridement at 6 months. In terms of patient comfort, erythritol air-polishing is superior. Trial Registration: The clinical trial was retrospectively registered in ClinicalTrial.gov with registration NCT04493398 (07/28/2020).

Download Full-text

Adjunctive air-polishing with erythritol in nonsurgical periodontal therapy: a randomized clinical trial

BMC Oral Health ◽

10.1186/s12903-020-01363-5 ◽

2020 ◽

Vol 20 (1) ◽

Author(s):

Holger F. R. Jentsch ◽

Christian Flechsig ◽

Benjamin Kette ◽

Sigrun Eick

Keyword(s):

Test Group ◽

Nonparametric Tests ◽

Periodontal Therapy ◽

Periodontal Pocket ◽

Control Group ◽

Clinical Variables ◽

Air Polishing ◽

Probing Depth ◽

Nonsurgical Periodontal Therapy ◽

Attachment Level

Abstract Background This study was aimed to investigate if the adjunctive use of erythritol air-polishing powder applied with the nozzle-system during subgingival instrumentation (SI) has an effect on the outcome of non-surgical periodontal treatment in patients with moderate to severe periodontitis. Methods Fourty-two individuals with periodontitis received nonsurgical periodontal therapy by SI without (controls, n = 21) and with adjunctive air-polishing using nozzle + erythritol powder (test, n = 21). They were analyzed for the clinical variables BOP (primary outcome at six months), probing depth (PD), attachment level, four selected microorganisms and two biomarkers at baseline, before SI as well as three and six months after SI. Statistical analysis included nonparametric tests for intra- and intergroup comparisons. Results In both groups, the clinical variables PD, attachment level and BOP significantly improved three and six months after SI. The number of sites with PD ≥ 5 mm was significantly lower in the test group than in the control group after six months. At six months versus baseline, there were significant reductions of Tannerella forsythia and Treponema denticola counts as well as lower levels of MMP-8 in the test group. Conclusions Subgingival instrumentation with adjunctive erythritol air-polishing powder does not reduce BOP. But it may add beneficial effects like reducing the probing depth measured as number of residual periodontal pocket with PD ≥ 5 mm when compared with subgingival instrumentation only. Clinical relevance The adjunctive use of erythritol air-polishing powder applied with the nozzle-system during SI may improve the clinical outcome of SI and may reduce the need for periodontal surgery. Trial registration The study was retrospectively registered in the German register of clinical trials, DRKS00015239 on 6th August 2018, https://www.drks.de/drks_web/navigate.do?navigationId=trial.HTML&TRIAL.

Download Full-text

Cellular effects of glycine and trehalose air-polishing powders on human gingival fibroblasts in vitro

Clinical Oral Investigations ◽

10.1007/s00784-021-04130-0 ◽

2021 ◽

Author(s):

Jens Weusmann ◽

James Deschner ◽

Jean-Claude Imber ◽

Anna Damanaki ◽

Natalia D. P. Leguizamón ◽

...

Keyword(s):

Wound Healing ◽

Cell Function ◽

Nuclear Translocation ◽

In Vitro Study ◽

Human Gingival Fibroblasts ◽

Mrna Levels ◽

Gingival Fibroblasts ◽

Air Polishing ◽

Wide Range

Abstract Objectives Air-polishing has been used in the treatment of periodontitis and gingivitis for years. The introduction of low-abrasive powders has enabled the use of air-polishing devices for subgingival therapy. Within the last decade, a wide range of different low-abrasive powders for subgingival use has been established. In this study, the effects of a glycine powder and a trehalose powder on human gingival fibroblasts (HGF) were investigated. Methods HGF were derived from three systemically and periodontally healthy donors. After 24 h and 48 h of incubation time, mRNA levels, and after 48 h, protein levels of TNFα, IL-8, CCL2, and VEGF were determined. In addition, NF-κB p65 nuclear translocation and in vitro wound healing were assessed. Statistical analysis was performed by ANOVA and post hoc Dunnett’s and Tukey’s tests (p < 0.05). Results Glycine powder significantly increased the expression of proinflammatory genes and showed exploitation of the NF-κB pathway, albeit trehalose powder hardly interfered with cell function and did not trigger the NF-κB pathway. In contrast to trehalose, glycine showed a significant inhibitory effect on the in vitro wound healing rate. Conclusion Subgingivally applicable powders for air-polishing devices can regulate cell viability and proliferation as well as cytokine expression. Our in vitro study suggests that the above powders may influence HGF via direct cell effects. Trehalose appears to be relatively inert compared to glycine powder.

Download Full-text

SEM Analysis of Enamel Abrasion after Air Polishing Treatment with Erythritol, Glycine and Sodium Bicarbonate

Coatings ◽

10.3390/coatings9090549 ◽

2019 ◽

Vol 9 (9) ◽

pp. 549 ◽

Cited By ~ 5

Author(s):

Bruna Sinjari ◽

Gianmaria D’Addazio ◽

Martina Bozzi ◽

Manlio Santilli ◽

Tonino Traini ◽

...

Keyword(s):

Surface Roughness ◽

Sodium Bicarbonate ◽

Air Flow ◽

Dental Enamel ◽

In Vitro Study ◽

Sem Analysis ◽

Medical Systems ◽

Air Polishing ◽

And Control

The aim of this in vitro study was to evaluate the enamel surface topography after treatment with three air polishing powders: Glycine (A), erythritol (B), and sodium bicarbonate (C) (Air Flow Soft, Plus and Classic powders, EMS Electro Medical Systems S.A., Nyon, Switzerland). Fifteen extracted incisors were randomly divided into three groups of five teeth each, A, B and C, respectively. The teeth were blocked in plaster bases, washed, dried and half-covered with polytetrafluoroethylene strips before treatment. In this way, each half-treated dental element became test and control of itself. Comparative statistical analysis of Rq (geometric average of the deviations occurring in roughness profile) was performed. The scanning electron microscope (SEM) analysis showed different degrees of surface roughness between the groups, decreasing after treatment. In addition, a statistically significant reduction p < 0.05 was present in group C (Rq mean non-treated 108.17 µm, 95% CI: 97.29–124.01 and Rq mean treated 86.78 µm, 95% CI: 80.63–93.70). A decrease in surface roughness post-treatment was not observed in group A and B. Therefore, it may be concluded that the air flow powders tested herein can be used on dental enamel to reduce the surface roughness due to function and the action of dental therapies.

Download Full-text