scholarly journals A Slip-Line Field for Ploughing During Orthogonal Cutting

1998 ◽  
Vol 120 (4) ◽  
pp. 693-699 ◽  
Author(s):  
D. J. Waldorf ◽  
R. E. DeVor ◽  
S. G. Kapoor
Keyword(s):  
Slip Line ◽  
Cutting Forces ◽  
Orthogonal Cutting ◽  
Chip Thickness ◽  
Great Promise ◽  
Uncut Chip Thickness ◽  
Workpiece Material ◽  
Line Field ◽  
Slip Line Field ◽  
Edge Radius

Under normal machining conditions, the cutting forces are primarily due to the bulk shearing of the workpiece material in a narrow zone called the shear zone. However, under finishing conditions, when the uncut chip thickness is of the order of the cutting edge radius, a ploughing component of the forces becomes significant as compared to the shear forces. Predicting forces under these conditions requires an estimate of ploughing. A slip-line field is developed to model the ploughing components of the cutting force. The field is based on other slip-line fields developed for a rigid wedge sliding on a half-space and for negative rake angle orthogonal cutting. It incorporates the observed phenomena of a small stable build-up of material adhered to the edge and a raised prow of material formed ahead of the edge. The model shows how ploughing forces are related to cutter edge radius—a larger edge causing larger ploughing forces. A series of experiments were run on 6061-T6 aluminum using tools with different edge radii—including some exaggerated in size—and different levels of uncut chip thickness. Resulting force measurements match well to predictions using the proposed slip-line field. The results show great promise for understanding and quantifying the effects of edge radius and worn tool on cutting forces.

Mathematical Modeling of Cutting Forces in Microdrilling

2013 ◽  
Vol 135 (1) ◽  
Author(s):  
Kumar Sambhav ◽  
Puneet Tandon ◽  
Shiv G. Kapoor ◽  
Sanjay G. Dhande
Keyword(s):  
Mathematical Modeling ◽  
Slip Line ◽  
Cutting Forces ◽  
Chip Thickness ◽  
Rake Angle ◽  
Cutting Mechanism ◽  
Line Field ◽  
Slip Line Field ◽  
Effective Rake Angle ◽  
Secondary Cutting

In drilling, the primary and secondary cutting lips of the drill shear the material while the central portion of the chisel edge indents the workpiece, making the cutting process complex to understand. As we go for microdrilling, it exhibits an added complexity to the cutting mechanism as the edge radius gets comparable to chip thickness at low feeds. The presented work models the forces by the primary cutting lip of a microdrill analytically using slip-line field that includes the changes in the effective rake angle and dead metal cap during cutting for cases of shearing as well as ploughing. To study the variation of forces experimentally, the primary cutting lip and chisel edge forces are separated out by drilling through pilot holes of diameter slightly above the drill-web thickness. Finally, the analytical and experimental results are compared and the model is calibrated.

SLIP-LINE MODELING OF MACHINING AND DETERMINE THE INFLUENCE OF RAKE ANGLE ON THE CUTTING FORCE

2012 ◽  
Vol 36 (1) ◽  
pp. 23-35 ◽  
Author(s):  
Sabri Ozturk
Keyword(s):  
Cutting Force ◽  
Slip Line ◽  
Cutting Forces ◽  
Orthogonal Cutting ◽  
Chip Thickness ◽  
Cutting Parameters ◽  
Rake Angle ◽  
Uncut Chip Thickness ◽  
Thrust Forces ◽  
Model Approach

In this study, the effects of the rake angle on main cutting force (Fc), and thrust forces (Ft) was investigated. A new slip line model approach for modelling the orthogonal cutting process was proposed. This model was applied at negative rake angles from 0° to –60° and consists of three regions. The main forces were measured with a computer aided quick stop device. Variance Analysis (ANOVA) was utilized to analyze the effects of the cutting parameters on cutting and thrust forces accordingly. Multi-variable regression analysis was also employed to determine the correlations between the factors and the cutting forces. The cutting forces could be calculated by equation parameters which are the rake angle and the uncut chip thickness.

Experimental investigation of a slip-line field model for a worn cutting tool

2013 ◽  
Vol 228 (8) ◽  
pp. 1398-1404 ◽  
Author(s):  
Alper Uysal ◽  
Erhan Altan
Keyword(s):  
Wear Rate ◽  
Slip Line ◽  
Field Model ◽  
Cutting Tool ◽  
Flank Wear ◽  
Cutting Speed ◽  
Chip Thickness ◽  
Rake Angle ◽  
Uncut Chip Thickness ◽  
Line Field

In this study, the slip-line field model developed for orthogonal machining with a worn cutting tool was experimentally investigated. Minimum and maximum values of five slip-line angles ( θ1, θ2, δ2, η and ψ) were calculated. The friction forces that were caused by flank wear land, chip up-curl radii and chip thicknesses were calculated by solving the model. It was specified that the friction force increased with increase in flank wear rate and uncut chip thickness and it decreased a little with increase in cutting speed and rake angle. The chip up-curl radius increased with increase in flank wear rate and it decreased with increase in uncut chip thickness. The chip thickness increased with increase in flank wear rate and uncut chip thickness. Besides, the chip thickness increased with increase in rake angle and it decreased with increase in cutting speed.

Influence of Reground Tool Sharpness on Micro-Cutting Process

2010 ◽  
Vol 37-38 ◽  
pp. 550-553
Author(s):  
Xin Li Tian ◽  
Zhao Li ◽  
Xiu Jian Tang ◽  
Fang Guo ◽  
Ai Bing Yu
Keyword(s):  
Cutting Forces ◽  
Orthogonal Cutting ◽  
Cutting Tools ◽  
Chip Thickness ◽  
Cutting Edge ◽  
Cutting Process ◽  
Micro Cutting ◽  
Temperature Distributions ◽  
Edge Radius ◽  
1045 Steel

Tool edge radius has obvious influences on micro-cutting process. It considers the ratio of the cutting edge radius and the uncut chip thickness as the relative tool sharpness (RST). FEM simulations of orthogonal cutting processes were studied with dynamics explicit ALE method. AISI 1045 steel was chosen for workpiece, and cemented carbide was chosen for cutting tool. Sixteen cutting edges with different RTS values were chosen for analysis. Cutting forces and temperature distributions were calculated for carbide cutting tools with these RTS values. Cutting edge with a small RTS obtains large cutting forces. Ploughing force tend to sharply increase when the RTS of the cutting edge is small. Cutting edge with a reasonable RTS reduces the heat generation and presents reasonable temperature distributions, which is beneficial to cutting life. The force and temperature distributions demonstrate that there is a reasonable RTS range for the cutting edge.

scholarly journals A Mathematical Modeling to Predict the Cutting Forces in Microdrilling

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Haoqiang Zhang ◽  
Xibin Wang ◽  
Siqin Pang
Keyword(s):  
Mathematical Modeling ◽  
Cutting Forces ◽  
Chip Thickness ◽  
Cutting Edge ◽  
Force Model ◽  
Cutting Mechanism ◽  
Line Field ◽  
Slip Line Field ◽  
Cutting Model ◽  
Secondary Cutting

In microdrilling, because of lower feed, the microdrill cutting edge radius is comparable to the chip thickness. The cutting edges therefore should be regarded as rounded edges, which results in a more complex cutting mechanism. Because of this, the macrodrilling thrust modeling is not suitable for microdrilling. In this paper, a mathematical modeling to predict microdrilling thrust is developed, and the geometric characteristics of microdrill were considered in force models. The thrust is modeled in three parts: major cutting edges, secondary cutting edge, and indentation zone. Based on slip-line field theory, the major cutting edges and secondary cutting edge are divided into elements, and the elemental forces are determined by an oblique cutting model and an orthogonal model, respectively. The thrust modeling of the major cutting edges and second cutting edge includes two different kinds of processes: shearing and ploughing. The indentation zone is modeled as a rigid wedge. The force model is verified by comparing the predicted forces and the measured cutting forces.

Identification of Friction Factors for Chamfered and Honed Tools Through Slip-Line Field Analysis

2006 ◽  
Author(s):  
Yigˇit Karpat ◽  
Tugˇrul O¨zel
Keyword(s):  
Slip Line ◽  
Metal Cutting ◽  
Orthogonal Cutting ◽  
Cutting Edge ◽  
Material Behavior ◽  
Field Analysis ◽  
Machining Performance ◽  
Line Field ◽  
Slip Line Field ◽  
Friction Factors

Analysis of tool-chip friction for tools with edge design in metal cutting helps to understand the complex material behavior around the cutting edge of the tool. The results of this analysis can be used to identify optimum tool edge design to achieve the most desirable machining performance. In this study, slip-line field analysis approach is used to investigate the average friction factor at the tool-chip interface and the dead metal zone phenomenon in orthogonal cutting for chamfered and honed tools. In an experimental set-up, an orthogonal cutting test of AISI 4340 steel is performed. Measured forces are utilized in identifying the friction factors at the tool-interface for both chamfered and honed tools for varying feed rates. Comparison of predicted and measured forces indicates good agreements. The results of this study can be utilized in designing friction at tool-chip interface for Finite Element simulations of machining with edge design tools. This study can also be extended to waterfall hone tools to identify the most optimum cutting edge geometry.

FE analysis of the effects of process representations on the prediction of residual stresses and chip morphology in the down-milling of Ti6Al4V

2021 ◽  
pp. 1-40
Author(s):  
Nejah Tounsi ◽  
Tahany El-Wardany
Keyword(s):  
Residual Stresses ◽  
Flank Wear ◽  
Orthogonal Cutting ◽  
Chip Thickness ◽  
Chip Morphology ◽  
Milling Process ◽  
Cutting Edge ◽  
Uncut Chip Thickness ◽  
Cutting Edge Radius ◽  
Edge Radius

Abstract In part II of these two-part papers, the effects of four FEM representations of the milling process on the prediction of chip morphology and residual stresses (RS) are investigated. Part II focuses on the milling of conventional uncut chip thickness h with finite cutting edge radius and flank wear, while part I of these two-part papers has reported on the results in the case of milling small uncut chip thickness in the micrometre range with finite cutting edge radius. Two geometric models of the flank-wear land composed of flat and curved wear land are proposed and assessed. The four process representations are: i) orthogonal cutting with flat wear land and with the mean uncut chip thickness h ¯; ii) orthogonal cutting with flat wear land and with variable h, which characterises the down-milling process and which is imposed on a flat surface of the final workpiece; iii) modelling the true kinematics of the down milling process with flat wear land and iv) modelling the true kinematics of the down milling process with curved wear land. They are designated as Cte-h, Var-h, True-h and True-h*. The effectiveness of these representations is assessed when milling Ti6Al4V with a flank-wear land of VB = 200µm.

Forces in Green Micromachining of Ceramics: An Experimental Investigation on Micromachining of Aluminum Nitride

2019 ◽  
Vol 7 (2) ◽  
Author(s):  
Recep Onler ◽  
Sundar V. Atre ◽  
O. Burak Ozdoganlar
Keyword(s):  
Cutting Forces ◽  
Metal Cutting ◽  
Diamond Tool ◽  
Orthogonal Cutting ◽  
Chip Thickness ◽  
Powder Injection ◽  
Uncut Chip Thickness ◽  
Green State ◽  
Single Crystal Diamond ◽  
Thrust Forces

This paper presents an investigation of green micromachining (GMM) forces during orthogonal micromachining green-state AlN ceramics. Green-state ceramics contain ceramic powders within a binder; processed samples are subsequently debound and sintered to obtain solid ceramic parts. An effective approach to create microscale features on ceramics is to use mechanical micromachining when the ceramics are at their green state. This approach, referred to as GMM, considerably reduces the forces and tool wear with respect to micromachining of sintered ceramics. As such, fundamental understanding on GMM of ceramics is critically needed. To this end, in this work, the force characteristics of powder injection molded AlN ceramics with two different binder states were experimentally investigated via orthogonal cutting. The effects of micromachining parameters on force components and specific energies were experimentally identified for a tungsten carbide (WC) and a single crystal diamond tools. As expected, the thrust forces were seen to be significantly larger than the cutting forces at low uncut chip thicknesses when using the carbide tool with its large edge radius. The cutting forces are found to be more sensitive to uncut chip thickness than the thrust forces are. When a sharp diamond tool is used, cutting forces are significantly larger than the thrust forces even for small uncut chip thicknesses. The specific energies follow an exponential decrease with increasing uncut chip thickness similar to the common trends in metal cutting. However, due to interaction characteristics between cutting edge and ceramic particles in the green body, evidence of plowing and rubbing along the cutting region was observed even with a sharp diamond tool.

Estimating the wax breaking force and wax removal efficiency of cup pig using orthogonal cutting and slip-line field theory

Fuel ◽  
2019 ◽  
Vol 236 ◽  
pp. 1529-1539 ◽  
Author(s):  
Weidong Li ◽  
Qiyu Huang ◽  
Wenda Wang ◽  
Xue Dong ◽  
Xuedong Gao ◽  
...  
Keyword(s):  
Field Theory ◽  
Removal Efficiency ◽  
Slip Line ◽  
Orthogonal Cutting ◽  
Breaking Force ◽  
Line Field ◽  
Slip Line Field ◽  
Wax Removal

A Slip Line Field Solution of the Free Oblique Continuous Cutting Problem in Conditions of Light Friction at Chip-Tool Interface

1980 ◽  
Vol 102 (4) ◽  
pp. 310-314 ◽  
Author(s):  
W. A. Morcos
Keyword(s):  
Plane Strain ◽  
Slip Line ◽  
Metal Cutting ◽  
Orthogonal Cutting ◽  
Cutting Parameters ◽  
Experimental Results ◽  
Line Field ◽  
Slip Line Field ◽  
Field Solution ◽  
Cutting Problem

Lee and Shaffer’s slip line field solution [11] for orthogonal cutting is generalized to the free oblique continuous cutting problem in plane strain. Comparison of the results as predicted by this solution with those of the plane strain modified Merchant model [8] and experimental results is achieved for some key metal cutting parameters. It is shown that in some respect, the plane strain modified Merchant model [8] predicts values of parameters which are closer to experimental results.

Sign in / Sign up

Export Citation Format

Share Document