Optimization of Machining Parameters for Milling Zirconia Ceramics by Polycrystalline Diamond Tool

Zirconia ceramics are widely used in many fields because of their excellent physical and mechanical properties. However, there are some challenges to machine zirconia ceramics with high processing efficiency. In order to optimize parameters for milling zirconia ceramics by polycrystalline diamond tool, finite element method was used to simulate machining process based on Johnson-Cook constitutive model. The effects of spindle speed, feed rate, radial and axial cutting depth on cutting force, tool flank wear and material removal rate were investigated. The results of the simulation experiment were analyzed and optimized by the response surface method. The optimal parameter combination was obtained when the spindle speed, feed rate, radial and axial cutting depth were 8000 r/min, 90.65 mm/min, 0.10 mm and 1.37 mm, respectively. Under these conditions, the cutting force was 234.81 N, the tool flank wear was 33.40 μm when the milling length was 60 mm and the material removal rate was 44.65 mm3/min.

Theoretical Insight Into Diamond Doping and Its Possible Effect on Diamond Tool Wear During Cutting of Steel

Natural diamond tools experience wear during cutting of steel. As reported in our previous work, Ga doping of diamond has an effect on suppressing graphitization of diamond which is a major route of wear. We investigate interstitial and substitutional dopants of different valence and different ionic radii (Ga, B, and He) to achieve a deeper understanding of inhibiting graphitization. In this study, ab initio calculations are used to explore the effects of three dopants that might affect the diamond wear. We consider mechanical effects via possible solution strengthening and electronic effects via dopant-induced modifications of the electronic structure. We find that the bulk modulus difference between pristine and doped diamond is clearly related to strain energies. Furthermore, boron doping makes the resulting graphite with stable sp2 hybridization more perfect than diamond, but Ga-doped diamond needs 2.49 eV to form the two graphene-like layers than only one layer, which would result in the suppressed graphitization and reduced chemical wear of the diamond tool.

A Study on Focused Ion Beam (FIB) Milling Machining and Fabrication Technology of Nano-Scale Diamond Tool for Machining Fine-Patterns in a Free-Form Surfaces

Recently, the technology of the industry has been increasing for diffractive optical elements, holograms, optical components, and next-generation display components. The advanced high value-added industry is designing fine patterns on ultra-precision optical components and applying them to various industries. In the case of the ultra-fine pattern, a contact-type machining technique is required because it requires a precise pattern in nano-scale units. In this paper, the fabrication technology of ultra-precision diamond which is essential in the ultra-precision processing technology was suggested. The material used in the experiment was a single-crystal diamond tool (SCD), and the equipment for machining the SCD used a focused ion beam (FEI COMPANY, system Nova 600) equipment. The back fire method was applied without metal coating in order to carry out the process study and the focused beam of 30 keV Ga+ ions were carried out processing for various fabrication of diamond cutting tools. As a result of applying the backfire method through the process experiment, the cutting edge width of the ultra-precision diamond tool was verified 275 nm.