A Horizontal Diamagnetic Levitation Based Low Frequency Vibration Energy Harvester

2015 ◽  
Vol 137 (6) ◽  
Author(s):  
S. Palagummi ◽  
J. Zou ◽  
F. G. Yuan
Keyword(s):  
Energy Harvester ◽  
Frequency Tuning ◽  
Pyrolytic Graphite ◽  
Low Frequency ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Vibration Energy Harvester ◽  
Graphite Plate ◽  
Diamagnetic Levitation ◽  
Coil Geometry

This paper investigates a horizontal diamagnetic levitation (HDL) system for vibration energy harvesting in contrast to the vertical diamagnetic levitation (VDL) system recently proposed by Wang et al. (2013, “A Magnetically Levitated Vibration Energy Harvester,” Smart Mater. Struct., 22(5), p. 055016). In this configuration, two large magnets, alias lifting magnets (LMs), are arranged co-axially at a distance such that in between them a magnet, alias floating magnet (FM), is passively levitated at a laterally offset equilibrium position. The levitation is stabilized in the horizontal direction by two diamagnetic plates (DPs) made of pyrolytic graphite placed on each side of the FM. This HDL configuration mitigates the limitation on the amplitude of the FM imposed in the VDL configuration and exploits the ability to tailor the geometry to meet specific applications due to its frequency tuning capability. A simple circular coil geometry is designed to replace a portion of the pyrolytic graphite plate without sacrificing the stability of the levitation for transduction. An experimental setup exhibits a weak softening frequency response and validates the theoretical findings; at an input root mean square (RMS) acceleration of 0.0434 m/s2 and at a resonant frequency of 1.2 Hz, the prototype generated a RMS power of 3.6 μW with an average system efficiency of 1.93%.

An enhanced performance of a horizontal diamagnetic levitation mechanism–based vibration energy harvester for low frequency applications

2016 ◽  
Vol 28 (5) ◽  
pp. 578-594 ◽  
Author(s):  
Sri Vikram Palagummi ◽  
Fuh-Gwo Yuan
Keyword(s):  
Figure Of Merit ◽  
Permanent Magnets ◽  
Energy Harvester ◽  
Performance Metrics ◽  
Low Frequency ◽  
Experimental System ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Vibration Energy Harvester ◽  
Diamagnetic Levitation

This article identifies and studies key parameters that characterize a horizontal diamagnetic levitation mechanism–based low frequency vibration energy harvester with the aim of enhancing performance metrics such as efficiency and volume figure of merit. The horizontal diamagnetic levitation mechanism comprises three permanent magnets and two diamagnetic plates. Two of the magnets, lifting magnets, are placed co-axially at a distance such that each attracts a centrally located magnet, floating magnet, to balance its weight. This floating magnet is flanked closely by two diamagnetic plates which stabilize the levitation in the axial direction. The influence of the geometry of the floating magnet, the lifting magnet, and the diamagnetic plate is parametrically studied to quantify their effects on the size, stability of the levitation mechanism, and the resonant frequency of the floating magnet. For vibration energy harvesting using the horizontal diamagnetic levitation mechanism, a coil geometry and eddy current damping are critically discussed. Based on the analysis, an efficient experimental system is setup which showed a softening frequency response with an average system efficiency of 25.8% and a volume figure of merit of 0.23% when excited at a root mean square acceleration of 0.0546 m/s2 and at a frequency of 1.9 Hz.

A Novel Broadband Vibration Energy Harvester

2014 ◽  
Vol 644-650 ◽  
pp. 3560-3563
Author(s):  
Yu Liu ◽  
Xiao Yan He ◽  
Shen Liu ◽  
Ying Wu ◽  
Yi Ou
Keyword(s):  
Resonance Frequency ◽  
Energy Harvester ◽  
Engineering Application ◽  
Low Frequency ◽  
Structure Design ◽  
Vibration Energy ◽  
Vibration Energy Harvester ◽  
Collector Efficiency ◽  
Energy Acquisition ◽  
Mode Energy

A single resonance frequency is the main factor of limiting vibration energy collector efficiency. In this paper, the multi degree of freedom oscillation adjusting bandwidth scheme is reported, designing a kind of new broadband vibration energy harvester, which has multi-mode energy acquisition, multi freedom vibration and broadband characteristics. Firstly, Broadband energy collector structure design. Secondly, Combining with the main vibration form, using the ANSYS carried out a detailed analysis of its working model. Finally, designing the prototype and doing some experimental verification, the results show that the designed energy collector with low frequency and wideband energy acquisition performance, the frequency domain of energy collection is 57.6 to 69.45HZ ,which break through the bottleneck of traditional single resonance frequency of energy acquisition, has a high value of theory and engineering application.

Modelling of Mechanical Nonlinearity in an Electromagnetic Vibration Energy Harvester Using a Forced Duffing Equation

2012 ◽  
Author(s):  
S. D. Moss ◽  
L. A. Vandewater ◽  
S. C. Galea
Keyword(s):  
Output Power ◽  
Energy Harvester ◽  
Duffing Oscillator ◽  
Maximum Output Power ◽  
Vibration Energy ◽  
Maximum Output ◽  
Vibration Energy Harvesting ◽  
Vibration Energy Harvester ◽  
Homotopy Analysis ◽  
Wire Coil

This work reports on the modelling and experimental validation of a bi-axial vibration energy harvesting approach that uses a permanent-magnet/ball-bearing arrangement and a wire-coil transducer. The harvester’s behaviour is modelled using a forced Duffing oscillator, and the primary first order steady state resonant solutions are found using the homotopy analysis method (or HAM). Solutions found are shown to compare well with measured bearing displacements and harvested output power, and are used to predict the wideband frequency response of this type of vibration energy harvester. A prototype harvesting arrangement produced a maximum output power of 12.9 mW from a 12 Hz, 500 milli-g (or 4.9 m/s2) rms excitation.

Sign in / Sign up

Export Citation Format

Share Document