Effect of Jet Position on Cooling an Array of Heated Obstacles

2017 ◽  
Vol 10 (1) ◽  
Author(s):  
Hussein M. Maghrabie ◽  
M. Attalla ◽  
H. E. Fawaz ◽  
M. Khalil
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Flow Structure ◽  
Numerical Study ◽  
Cross Flow ◽  
Jet Impingement ◽  
Pumping Power ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Number Ratio

Numerical study of the effect of jet position (JP) on cooling process of an array of heated obstacles simulating electronic components has been investigated based on realizable k–ε model. Jet positions have been changed to impinge each row of obstacles consecutively. The experiments have been achieved at three different values of jet-to-channel Reynolds number ratio, Rej/Rec = 1, 2, and 4. In this study, a comparison between two different cooling processes, cross flow only (CF) and jet impingement with cross flow (JICF), has been achieved. The flow structure, heat transfer characteristics, and the pumping power have been investigated for different jet positions. The results show that the jet position affects significantly the flow structure, as well as the heat transfer characteristics. According to the results of average heat transfer coefficient and the pumping power, the more effective jet position for all values of jet-to-channel Reynolds number ratio (1, 2, and 4) is achieved when the jets impinge the third row of obstacles (JP3).

Numerical Study on Flow and Heat Transfer Characteristics of Jet Impingement Cooling

2011 ◽  
Vol 148-149 ◽  
pp. 680-683
Author(s):  
Run Peng Sun ◽  
Wei Bing Zhu ◽  
Hong Chen ◽  
Chang Jiang Chen
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Numerical Study ◽  
Cross Flow ◽  
Jet Impingement ◽  
Local Heat Transfer ◽  
Transfer Characteristic ◽  
Heat Transfer Characteristics ◽  
Impingement Cooling ◽  
Transfer Characteristics

Three-dimensional numerical study is conducted to investigate the heat transfer characteristics for the flow impingement cooling in the narrow passage based on cooling technology of turbine blade.The effects of the jet Reynolds number, impingement distance and initial cross-flow on heat transfer characteristic are investigated.Results show that when other parameters remain unchanged local heat transfer coefficient increases with increase of jet Reynolds number；overall heat transfer effect is reduced by initial cross-flow；there is an optimal distance to the best effect of heat transfer.

Experimental Investigation of Jet Impingement Heat Transfer in Cross-Flow Modified by a V-Shaped Rib

2014 ◽  
Author(s):  
Chenglong Wang ◽  
Lei Wang ◽  
Bengt Sundén
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Velocity Ratio ◽  
Cross Flow ◽  
Jet Impingement ◽  
Impinging Jet ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Impingement Heat Transfer ◽  
The Cross

Experimental studies are carried out to investigate the jet impingement heat transfer characteristics in cross-flow with and without the presence of a 45 deg V-shaped rib. The local heat transfer coefficients are obtained by a liquid crystal thermography (LCT) technique. The ratio of nozzle-to-surface spacing to jet diameter is 3.56, the jet Reynolds number is kept at 17,000, the cross-flow Reynolds number spans from 32,700 to 65,000, the velocity ratio of jet to cross-flow ranges from 1.5 to 3.0. The impingement heat transfer characteristics in cross-flow are changed from the results without the cross-flow, and they are strongly affected by the velocity ratio. The presence of a V-shaped rib significantly modifies the heat transfer patterns of the impinging jet in cross-flow. Compared to the results without ribs, the heat transfer over the ribbed surface is enhanced for a low velocity ratio but retarded for a high velocity ratio, depending on the interaction between the rib induced flow and the impinging jet.

Flow and Heat Transfer of Confined Impingement Jets Cooling

2000 ◽  
Author(s):  
Ting Wang ◽  
Mingjie Lin ◽  
Ronald S. Bunker
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Flow Structure ◽  
Experimental Studies ◽  
Cross Flow ◽  
Jet Impingement ◽  
Target Surface ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Transfer Behavior

Experimental studies on heat transfer and flow structure in confined impingement jets were performed. The objective of this study was to investigate the detailed heat transfer coefficient distribution on the jet impingement target surface and flow structure in the confined cavity. The distribution of heat transfer coefficients on the target surface was obtained by employing the transient liquid crystal method coupled with a 3-D inverse transient conduction scheme under Reynolds number ranging from 1039 to 5175. The results show that the average heat transfer coefficients increased linearly with the Reynolds number as Nu = 0.00304 Pr0.42Re. The effects of cross flow on heat transfer were investigated. The flow structure were analyzed to gain insight into convective heat transfer behavior.

Numerical Study of Flow and Heat Transfer Characteristics of Impinging Jets

2010 ◽  
Author(s):  
Tarek M. Abdel-Salam
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Nusselt Number ◽  
Numerical Study ◽  
Three Dimensional ◽  
Impinging Jets ◽  
Two Dimensional ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Flow And Heat Transfer

This study presents results for flow and heat transfer characteristics of two-dimensional rectangular impinging jets and three-dimensional circular impinging jets. Flow geometries under consideration are single and multiple impinging jets issued from a plane wall. Both confined and unconfined configurations are simulated. Effects of Reynolds number and the distance between the jets are investigated. Results are obtained with a finite volume computational fluid dynamics (CFD) code. Structured grids are used in all cases of the present study. Turbulence is treated with a two equation k-ε model. Different jet velocities have been examined corresponding to Reynolds numbers of 5,000 to 20,000. Results of the three-dimensional cases show that Reynolds number has no effect on the velocity distribution of the center jet. Results of both two-dimensional and three-dimensional cases show that Reynolds number highly affects the heat transfer and values of the Nusselt number. The maximum Nusselt number was always found at the stagnation point of the center jet.

Heat Transfer Characteristics of CuO-Water Nanofluids Jet Impingement on a Hot Surface

2016 ◽  
Author(s):  
Sandesh S. Chougule ◽  
Mayank Modak ◽  
Prajakta D. Gharge ◽  
S. K. Sahu
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Jet Impingement ◽  
Target Surface ◽  
Test Surface ◽  
Initial Surface ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Impingement Heat Transfer ◽  
Hot Surface

In present study, an experimental investigation has been carried out to analyze the heat transfer characteristics of CuO-water nanofluids jets on a hot surface. A rectangular stainless steel foil (AISI-304, 0.15 mm thick) is used as a test surface is electrically heated to obtain the required initial temperature. The distribution of heat flux on the target surface is evaluated from the recorded thermal images during transient cooling. The effect of nanoparticle concentration and Reynolds number of the nanofluids jet impingement heat transfer characteristics is studied. Tests were performed for an initial surface temperature of 500°C, Reynolds number (5000≤Re≤13000), CuO-water nanofluids concentration (Φ= 0.15%, 0.6%) and nozzle to plate distance was l/d= 4.

An Experimental Investigation on Heat Transfer Characteristics of Hot Surface by Using CuO–Water Nanofluids in Circular Jet Impingement Cooling

2017 ◽  
Vol 140 (1) ◽  
Author(s):  
Mayank Modak ◽  
Sandesh S. Chougule ◽  
Santosh K. Sahu
Keyword(s):  
Heat Transfer ◽  
Experimental Investigation ◽  
Reynolds Number ◽  
Nusselt Number ◽  
Jet Impingement ◽  
Test Surface ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Hot Surface ◽  
Plate Distance

In the present study, an experimental investigation has been carried out to analyze the heat transfer characteristics of CuO–water nanofluids jet on a hot surface. A rectangular stainless steel foil (AISI-304, 0.15 mm thick) used as the test surface is electrically heated to obtain the required initial temperature (500 °C). The distribution of surface heat flux on the target surface is evaluated from the recorded thermal images during transient cooling. The effect of nanoparticle concentration and Reynolds number of the nanofluids on the heat transfer characteristics is studied. Tests are performed for varied range of Reynolds number (5000 ≤ Re ≤ 12,000), two different CuO–water nanofluids concentration (Ф = 0.15%, 0.6%) and two different nozzle to plate distance (l/d = 6, 12). The enhancement in Nusselt number for CuO–water nanofluids was found to be 14% and 90%, for nanofluids concentration of Ф = 0.15% and Ф = 0.60%, respectively, compared to pure water. The test surface characteristics after nanofluids jet impingement are studied using scanning electron microscope (SEM). Based on the investigation, a correlation among various parameters, namely, Reynolds number (Re), Prandtl number (Pr), nozzle to plate distance (l/d), and Nusselt number (Nu), is presented.

Numerical Investigations of Flow and Heat Transfer Characteristics Between Turbulent Double Jet Impingement and a Moving Plate

2019 ◽  
Vol 11 (5) ◽  
Author(s):  
N. Satish ◽  
K. Venkatasubbaiah
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Jet Impingement ◽  
Heat Transfer Characteristics ◽  
Moving Plate ◽  
Enhancement Of Heat Transfer ◽  
Transfer Characteristics ◽  
Flow And Heat Transfer ◽  
Plate Velocity ◽  
Single Jet

The analysis of fluid flow and heat transfer characteristics of double turbulent jet flow impinging on a stationary and moving plate has been numerically studied. Unsteady-state two-dimensional incompressible turbulent forced convection flow is considered for present analysis. Turbulence is modelled by the Reynolds-averaged Navier–Stokes (RANS) equation with the k − ε model and enhanced wall treatment. The governing equations are solved using a finite volume based commercial solver. The results for the effect of single jet and double jet, jet Reynolds number, plate velocity, location, and center spacing between the two jets on flow and heat transfer characteristics are reported. The results show that the enhancement of heat transfer is 32.70% for the double jet compared with the single jet impingement on a stationary plate. As significant enhancement of heat transfer is observed with an increase in the second jet Reynolds number and plate velocity. The results show that the size and shape of the recirculation zones between jets are greatly altered with respect to spacing between the jets to the plate and the center distance between the jets. The results show that the enhancement of heat transfer is 37.3% for moving plate velocity due to a decrease in the spacing between the jets and the plate from 6 to 4. Results show that the local peak Nusselt number is influenced by the plate velocity. These results are validated by experimental and numerical results available in the literature.

Sign in / Sign up

Export Citation Format

Share Document