A Technique for High-Speed Microscopic Imaging of Dynamic Failure Events and Its Application to Shear Band Initiation in Polycarbonate

2021 ◽  
pp. 1-28
Author(s):  
Pinkesh Malhotra ◽  
Sijun Niu ◽  
Vikas Srivastava ◽  
Pradeep R. Guduru
Keyword(s):  
Shear Band ◽  
High Speed ◽  
Computational Simulation ◽  
Constitutive Models ◽  
Deformation Field ◽  
Shear Instability ◽  
Large Field ◽  
Dynamic Failure ◽  
Dominant Band ◽  
Notch Tip

Abstract An experimental technique is reported, which can image the deformation fields associated with dynamic failure events at high spatial and temporal resolutions simultaneously. The technique is demonstrated at a spatial resolution of ~1 μm and a temporal resolution of 250 ns, while maintaining a relatively large field of view (≈ 1.11 mm × 0.63 mm). As a demonstration, the technique is used to image the deformation field near a notch tip during initiation of a shear instability in polycarbonate. An ordered array of 10 μm diameter speckles with 20 μm pitch, and deposited on the specimen surface near the notch tip helps track evolution of the deformation field. Experimental results show that the width of the shear band in polycarbonate is approximately 75 μm near the notch-tip within resolution limits of the experiments. The measurements also reveal formation of two incipient localization bands near the crack tip, one of which subsequently becomes the dominant band while the other is suppressed. Computational simulation of the experiment was conducted using a thermo-mechanically coupled rate-dependent constitutive model of polycarbonate to gain further insight into the experimental observations enabled by the combination of high spatial and temporal resolutions. The simulation results show reasonable agreement with the experimentally observed kinematic field and features near the notch-tip, while also pointing to the need for further refinement of constitutive models that are calibrated at high strain rates (~105/s) and also account for damage evolution.

Dynamic Failure Mechanisms in Beryllium-Bearing Bulk Metallic Glasses

1998 ◽  
Vol 554 ◽  
Author(s):  
David M. Owen ◽  
Ares J. Rosakis ◽  
William L. Johnson
Keyword(s):  
Crack Initiation ◽  
Shear Band ◽  
Metallic Glasses ◽  
Impact Loading ◽  
High Speed ◽  
Failure Mechanisms ◽  
Shear Bands ◽  
Dynamic Crack ◽  
Dynamic Failure ◽  
Asymmetric Impact

AbstractThe understanding of dynamic failure mechanisms in bulk metallic glasses is important for the application of this class of materials to a variety of engineering problems. This is true not only for design environments in which components are subject to high loading rates, but also when components are subjected to quasi-static loading conditions where observations have been made of damage propagation occurring in an unstable, highly dynamic manner. This paper presents preliminary results of a study of the phenomena of dynamic crack initiation and growth as well as the phenomenon of dynamic localization (shear band formation) in a beryllium-bearing bulk metallic glass, Zr41.25Ti13.75Ni10Cu12.75Be22.5. Pre-notched and prefatigued plate specimens were subjected to quasi-static and dynamic three-point bend loading to investigate crack initiation and propagation. Asymmetric impact loading with a gas gun was used to induce dynamic shear band growth. The mechanical fields in the vicinity of the dynamically loaded crack or notch tip were characterized using high-speed optical diagnostic techniques. The results demonstrated a dramatic increase in the crack initiation toughness with loading rate and subsequent crack tip speeds approaching 1000 m s−1. Dynamic crack tip branching was also observed under certain conditions. Shear bands formed readily under asymmetric impact loading. The shear bands traveled at speeds of approximately 1300 m s−1 and were accompanied by intense localized heating measured using high-speed full-field infrared imaging. The maximum temperatures recorded across the shear bands were in excess of 1500 K.

Assessment of two different constitutive models in High Speed Forming

2019 ◽  
Author(s):  
Andrey Brezolin ◽  
Tiago dos Santos ◽  
Pedro Rosa ◽  
Evandro Paese ◽  
Martin Geier ◽  
...  
Keyword(s):  
High Speed ◽  
Constitutive Models ◽  
High Speed Forming

scholarly journals Identification of cellular-activity dynamics across large tissue volumes in the mammalian brain

2017 ◽  
Author(s):  
Logan Grosenick ◽  
Michael Broxton ◽  
Christina K. Kim ◽  
Conor Liston ◽  
Ben Poole ◽  
...  
Keyword(s):  
High Speed ◽  
Dorsal Hippocampus ◽  
Computational Imaging ◽  
Three Dimensions ◽  
Large Field ◽  
Mammalian Brain ◽  
Subcortical Structures ◽  
Intact Tissue ◽  
Context Learning

Tracking the coordinated activity of cellular events through volumes of intact tissue is a major challenge in biology that has inspired significant technological innovation. Yet scanless measurement of the high-speed activity of individual neurons across three dimensions in scattering mammalian tissue remains an open problem. Here we develop and validate a computational imaging approach (SWIFT) that integrates high-dimensional, structured statistics with light field microscopy to allow the synchronous acquisition of single-neuron resolution activity throughout intact tissue volumes as fast as a camera can capture images (currently up to 100 Hz at full camera resolution), attaining rates needed to keep pace with emerging fast calcium and voltage sensors. We demonstrate that this large field-of-view, single-snapshot volume acquisition method—which requires only a simple and inexpensive modification to a standard fluorescence microscope—enables scanless capture of coordinated activity patterns throughout mammalian neural volumes. Further, the volumetric nature of SWIFT also allows fast in vivo imaging, motion correction, and cell identification throughout curved subcortical structures like the dorsal hippocampus, where cellular-resolution dynamics spanning hippocampal subfields can be simultaneously observed during a virtual context learning task in a behaving animal. SWIFT’s ability to rapidly and easily record from volumes of many cells across layers opens the door to widespread identification of dynamical motifs and timing dependencies among coordinated cell assemblies during adaptive, modulated, or maladaptive physiological processes in neural systems.

A Theory on the Onset of Acoustic Resonance in a Multistage Compressor

2018 ◽  
Vol 140 (8) ◽  
Author(s):  
Xiaohua Liu ◽  
Tobias Willeke ◽  
Florian Herbst ◽  
Jun Yang ◽  
Joerg Seume
Keyword(s):  
Rotor Blade ◽  
High Speed ◽  
Flow Instability ◽  
Computational Simulation ◽  
Computational Cost ◽  
Acoustic Resonance ◽  
Excitation Source ◽  
Acoustic Excitation ◽  
Tip Leakage Flow ◽  
Suction Surface

A novel theoretical model of the internal flow field in multistage axial compressors based on an eigenvalue approach is developed, in order to predict the onset of acoustic resonance in aircraft engines. Using an example high-speed four-stage compressor, it is shown that one of the resultant frequencies is in excellent agreement with the experimental data in terms of acoustic resonance. On the basis of the computed natural frequency of the whole compression system and the measured spanwise distribution of static pressure, the location of the acoustic excitation source can be found in the third stage. Unsteady flow simulations of the full annulus of this stage reveal two criteria for acoustic excitation at the rotor-blade tip, reversed flow near the suction surface and flow impingement on the pressure surface. Additionally, a fast Fourier transform of the unsteady pressure field at the upper rotor-blade span verifies the existence of the computed unstable frequency of the oscillating tip leakage flow. Using this novel theory, which combines a theoretical calculation of flow-instability frequency of the global system with the computational simulation of a single stage, the onset mechanism and location of the excitation source of acoustic resonance in multistage turbomachinery can be explained at acceptable computational cost.

Experimental Study of the Influence of the Pore Water Pressure Evolution and the Shear Band Formation on the Extraction Resistance of Submerged Anchor Plates

2018 ◽  
Author(s):  
Manuela Kanitz ◽  
Juergen Grabe
Keyword(s):  
Experimental Study ◽  
Shear Band ◽  
Pore Water ◽  
High Speed ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Offshore Structures ◽  
Shear Band Formation ◽  
Band Formation ◽  
Anchor Plates

Floating offshore structures used to generate wind energy are founded on submerged foundations such as anchor plates. Their extraction resistance is of major importance during and at the end of the lifetime cycle of these offshore structures. During their lifetime cycle, the foundation is suspended to complex loading conditions due to waves, tidal currents and wind loads. To guarantee a stable structure, the extraction resistance of the anchor plates has to be known. At the end of the lifetime cycle of the offshore structures, the extraction resistance is mainly influencing the removal of the anchor plates. This resistance is a lot higher than the sum of its self-weight and hydrostatic and earth pressure acting on the structure. With initiation of a motion of the anchor plate, the volume underneath this structure is increased leading to negative pore water pressure until inflowing pore water is filling the newly created volume. In order to investigate this effect, an extensive experimental study at model scale with a displacement-driven extraction is performed. Pore pressure measurements are carried out at various locations in the soil body and underneath the plate. The soil movement is tracked with a high-speed camera to investigate the shear band formation with the particle image velocimetry method (PIV). The experiments will be conducted considering different packing densities of the soil body and at different extraction velocities to investigate their effect on the extraction resistance of anchor plates.

scholarly journals High‐Speed Large‐Field Multifocal Illumination Fluorescence Microscopy

2019 ◽  
Vol 14 (2) ◽  
pp. 1900070 ◽  
Author(s):  
Zhenyue Chen ◽  
Benedict Mc Larney ◽  
Johannes Rebling ◽  
Xosé Luis Deán‐Ben ◽  
Quanyu Zhou ◽  
...  
Keyword(s):  
Fluorescence Microscopy ◽  
High Speed ◽  
Large Field
Sign in / Sign up

Export Citation Format

Share Document