scholarly journals The GTCP36-300, a Gas Turbine Auxiliary Power Unit for Advanced Technology Transport Aircraft

Author(s):  
L. M. Stohlgren ◽  
Lutz D. Werner

The Garrett GTCP36-300 Series Auxiliary Power Unit is being developed for use on advanced technology transport aircraft in the 150-passenger size class. The first application will be the Airbus Industries A320 Aircraft. The APU uses a 6:1 pressure ratio, single-stage compressor and turbine, driving a single-stage load compressor and accessory gearbox. The 480 horsepower APU delivers compressed air to the aircraft pneumatic system and drives a customer furnished 90 kva, 24,000 rpm electrical generator. State-of-the-art aerodynamics, materials, and digital electronics are used to give the user-airlines an APU delivering maximum performance with minimum envelope, weight, and cost of ownership.

Author(s):  
J. Kidwell

The Garrett Auxiliary Power Division’s Multipurpose Small Power unit (MPSPU), Contract DAAJ02-86-C-0006, sponsored by the Aviation Applied Technology Directorate, Ft. Eustis, Virginia, has progressed through detail design and analysis to component and power unit development testing. The MPSPU Advanced Development program is structured to provide advanced technology for current and future United States Army and other Department of Defense auxiliary power unit/secondary power system applications for aircraft, combat vehicles, and mobile tactical shelters. The MPSPU has been designed for low specific fuel consumption, low weight and volume, low acquisition and life cycle costs and high reliability and durability. This paper discusses the design and current developmental status of the Garrett GTP50 MPSPU as reported by Kidwell (1988).


Author(s):  
SooYong Kim ◽  
JunYoung Park ◽  
Victor L. Goldenberg

Prevention of compressor surge is one of the most important tasks in operation of gas turbine engine. The easiest way to see the phenomena is to show the static and dynamic operation characteristic on the map. Its operation zone will be restricted by the surge limit and, static and transient process must have some margin for it. Surge margin of a static regime is normally chosen during its design stage. Safe operation during part load condition without facing the surge is an indispensable task for control system design and a swift response from the engine is required to avoid it. Effect of rotor moment of inertia, air/gas volumes and heat transfer are factors to cause the transition from the static line. In case a large volume such as heat exchanger exists in the system it will exert a substantial influence to dynamic characteristics. In the present paper, influence of air volume bled from the compressor exit on transient process is investigated with an example of an auxiliary power unit micro-turbine engine. A typical compressor characteristic with scaling was used for the calculation. Turbine mass, pressure ratio, rotation speed, power and moment are calculated based on mass and work conservation. Result from the present study can give a guidance to design the control system. A computer program is developed to calculate the dynamic process using the MathCAD commercial software. Air volume is changed from 0.02 to 6 m3.


Author(s):  
L. M. Stohlgren

The Garrett GTCP331 series auxiliary power unit (APU) is currently entering airline service as a Category I -Essential APU with the Boeing and Airbus advanced transport aircraft. The GTCP331 APU serves as a secondary pneumatic and electrical power source for the aircraft systems, both on the ground and in-flight. As it enters airline service, the GTCP331 APU offers: sound design origin, advanced metallurgical technology, a rigorous test program background, state-of-the-art full authority digital electronic controls, and the application of acoustic attenuating techniques and materials. These facets combine to present user-airlines with a modern, high-technology APU that through lowered operating cost, and increased reliability and maintainability, meets the challenge of reduced cost of ownership.


2009 ◽  
Vol 129 (2) ◽  
pp. 228-229
Author(s):  
Noboru Katayama ◽  
Hideyuki Kamiyama ◽  
Yusuke Kudo ◽  
Sumio Kogoshi ◽  
Takafumi Fukada

1989 ◽  
Author(s):  
DOUG MEYER ◽  
KENT WEBER ◽  
WALTER SCOTT

2020 ◽  
Vol 33 (2) ◽  
pp. 448-455 ◽  
Author(s):  
Liansheng LIU ◽  
Yu PENG ◽  
Lulu WANG ◽  
Yu DONG ◽  
Datong LIU ◽  
...  

2021 ◽  
Author(s):  
Thomas Bronson ◽  
Rudy Dudebout ◽  
Nagaraja Rudrapatna

Abstract The aircraft Auxiliary Power Unit (APU) is required to provide power to start the main engines, conditioned air and power when there are no facilities available and, most importantly, emergency power during flight operation. Given the primary purpose of providing backup power, APUs have historically been designed to be extremely reliable while minimizing weight and fabrication cost. Since APUs are operated at airports especially during taxi operations, the emissions from the APUs contribute to local air quality. There is clearly significant regulatory and public interest in reducing emissions from all sources at airports, including from APUs. As such, there is a need to develop technologies that reduce criteria pollutants, namely oxides of nitrogen (NOx), unburned hydrocarbons (UHC), carbon monoxide (CO) and smoke (SN) from aircraft APUs. Honeywell has developed a Low-Emissions (Low-E) combustion system technology for the 131-9 and HGT750 family of APUs to provide significant reduction in pollutants for narrow-body aircraft application. This article focuses on the combustor technology and processes that have been successfully utilized in this endeavor, with an emphasis on abating NOx. This paper describes the 131-9/HGT750 APU, the requirements and challenges for small gas turbine engines, and the selected strategy of Rich-Quench-Lean (RQL) combustion. Analytical and experimental results are presented for the current generation of APU combustion systems as well as the Low-E system. The implementation of RQL aerodynamics is well understood within the aero-gas turbine engine industry, but the application of RQL technology in a configuration with tangential liquid fuel injection which is also required to meet altitude ignition at 41,000 ft is the novelty of this development. The Low-E combustion system has demonstrated more than 25% reduction in NOx (dependent on the cycle of operation) vs. the conventional 131-9 combustion system while meeting significant margins in other criteria pollutants. In addition, the Low-E combustion system achieved these successes as a “drop-in” configuration within the existing envelope, and without significantly impacting combustor/turbine durability, combustor pressure drop, or lean stability.


Sign in / Sign up

Export Citation Format

Share Document