Type Synthesis of Six-DOF Wrist-Partitioned Fully Parallel Manipulators

2007 ◽  
Author(s):  
Xianwen Kong ◽  
Cle´ment M. Gosselin
Keyword(s):  
Parallel Manipulator ◽  
General Structure ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Type Synthesis ◽  
Forward Displacement ◽  
Serial Manipulators ◽  
Six Dof ◽  
Moving Platform ◽  
Actuated Joints

A six-DOF wrist-partitioned fully parallel manipulator is a parallel manipulator in which three of the six actuated joints are used to control the position of a point on the moving platform while the other three are further used to control the orientation of the moving platform. Such parallel manipulators are in fact the parallel counterparts of the wrist-partitioned serial manipulators, which are widely used in industry. Unlike parallel manipulators of a general structure, a six-DOF wrist-partitioned fully parallel manipulator usually has simple kinematic characteristics such as its forward displacement analysis and singularity analysis are easy to solve. This paper deals with the type synthesis of six-DOF wrist-partitioned fully parallel manipulators. An approach is first proposed for the type synthesis of this class of parallel manipulators. Using the proposed approach, six-DOF wrist-partitioned fully parallel manipulators can be constructed from the types of three-DOF non-overconstrained spherical parallel manipulators. A large number of six-DOF wrist-partitioned fully parallel manipulators are then obtained, and several types of practical relevance are also identified.

Type Synthesis of Six-DOF Wrist-Partitioned Parallel Manipulators

2008 ◽  
Vol 130 (6) ◽  
Author(s):  
Xianwen Kong ◽  
Clément M. Gosselin
Keyword(s):  
Parallel Manipulator ◽  
General Structure ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Type Synthesis ◽  
Forward Displacement ◽  
Serial Manipulators ◽  
Six Dof ◽  
Moving Platform ◽  
Actuated Joints

A six-DOF wrist-partitioned parallel manipulator is a parallel manipulator in which three of the six actuated joints are used to control the position of a point on the moving platform while the other three are further used to control the orientation of the moving platform. Such parallel manipulators are, in fact, the parallel counterparts of the wrist-partitioned serial manipulators, which are widely used in industry. Unlike parallel manipulators of a general structure, a six-DOF wrist-partitioned parallel manipulator usually has simple kinematic characteristics such as its forward displacement analysis and singularity analysis are easy to solve. This paper deals with the type synthesis of six-DOF wrist-partitioned parallel manipulators. An approach is first proposed for the type synthesis of this class of parallel manipulators. Using the proposed approach, six-DOF wrist-partitioned parallel manipulators can be constructed from the types of three-DOF nonoverconstrained spherical parallel manipulators. A large number of six-DOF wrist-partitioned parallel manipulators are then obtained, and several types of practical relevance are also identified.

Forward Displacement Analysis of a Linearly Actuated Quadratic Spherical Parallel Manipulator

2010 ◽  
Author(s):  
Xianwen Kong ◽  
Cle´ment Gosselin ◽  
James M. Ritchie
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Alternative Formulation ◽  
Forward Displacement ◽  
Displacement Analysis ◽  
Singular Configuration ◽  
Actuated Joints ◽  
Spherical Parallel Manipulator ◽  
Forward Displacement Analysis

A quadratic parallel manipulator refers to a parallel manipulator with a quadratic characteristic polynomial. This paper revisits the forward displacement analysis (FDA) of a linearly actuated quadratic spherical parallel manipulator. An alternative formulation of the kinematic equations of the quadratic spherical parallel manipulator is proposed. The singularity analysis of the quadratic spherical parallel manipulator is then dealt with. A new type of singularity of parallel manipulators — leg actuation singularity — is identified. If a leg is in a leg actuation singular configuration, the actuated joints in this leg cannot be actuated even if the actuated joints in other legs are released. A formula is revealed that produces a unique current solution to the FDA for a given set of inputs. The input space is also revealed for the quadratic spherical parallel manipulator in order to guarantee that the robot works in the same assembly mode. This work may facilitate the control of the quadratic spherical parallel manipulator.

Forward Displacement Analysis of a Linearly Actuated Quadratic Spherical Parallel Manipulator

2011 ◽  
Vol 3 (1) ◽  
Author(s):  
Xianwen Kong ◽  
Clément Gosselin ◽  
James M. Ritchie
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Alternative Formulation ◽  
Forward Displacement ◽  
Displacement Analysis ◽  
Singular Configuration ◽  
Actuated Joints ◽  
Spherical Parallel Manipulator ◽  
Forward Displacement Analysis

A quadratic parallel manipulator refers to a parallel manipulator with a quadratic characteristic polynomial. This paper revisits the forward displacement analysis (FDA) of a linearly actuated quadratic spherical parallel manipulator. An alternative formulation of the kinematic equations of the quadratic spherical parallel manipulator is proposed. The singularity analysis of the quadratic spherical parallel manipulator is then dealt with. A new type of singularity of parallel manipulators—leg actuation singularity—is identified. If a leg is in a leg actuation singular configuration, the actuated joints in this leg cannot be actuated even if the actuated joints in other legs are released. A formula is revealed that produces a unique current solution to the FDA for a given set of inputs. The input space is also revealed for the quadratic spherical parallel manipulator in order to guarantee that the robot works in the same assembly mode. This work may facilitate the control of the quadratic spherical parallel manipulator.

scholarly journals Singularity Conditions of 3T1R Parallel Manipulators With Identical Limb Structures

2012 ◽  
Vol 4 (1) ◽  
Author(s):  
Semaan Amine ◽  
Mehdi Tale Masouleh ◽  
Stéphane Caro ◽  
Philippe Wenger ◽  
Clément Gosselin
Keyword(s):  
Parallel Manipulator ◽  
Jacobian Matrix ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Type Synthesis ◽  
Constraint Analysis ◽  
Fixed Direction ◽  
Geometric Singularity ◽  
Grassmann Geometry ◽  
Grassmann Cayley Algebra

This paper deals with the singularity analysis of parallel manipulators with identical limb structures performing Schönflies motions, namely, three independent translations and one rotation about an axis of fixed direction (3T1R). Eleven architectures obtained from a recent type synthesis of such manipulators are analyzed. The constraint analysis shows that these architectures are all overconstrained and share some common properties between the actuation and the constraint wrenches. The singularities of such manipulators are examined through the singularity analysis of the 4-RUU parallel manipulator. A wrench graph representing the constraint wrenches and the actuation forces of the manipulator is introduced to formulate its superbracket. Grassmann–Cayley Algebra is used to obtain geometric singularity conditions. Based on the concept of wrench graph, Grassmann geometry is used to show the rank deficiency of the Jacobian matrix for the singularity conditions. Finally, this paper shows the general aspect of the obtained singularity conditions and their validity for 3T1R parallel manipulators with identical limb structures.

A Class of Parallel Manipulators Based on Kinematically Simple Branches

1994 ◽  
Vol 116 (3) ◽  
pp. 908-914 ◽  
Author(s):  
R. P. Podhorodeski ◽  
K. H. Pittens
Keyword(s):  
Parallel Manipulators ◽  
Parallel Structure ◽  
End Effector ◽  
Forward Displacement ◽  
Parallel Class ◽  
Serial Chain ◽  
Order Polynomial ◽  
Six Dof ◽  
Actuated Joints ◽  
Chain Branch

Parallel manipulators consisting of serial branches acting in parallel on a common end effector are examined. All nonredundant, six DOF manipulators corresponding to this in-parallel class of structures are enumerated. A specific in-parallel structure, three branches with two actuated joints per branch (3–2,2,2), is chosen as most promising based upon performance considerations. A class of kimematically simple (KS) serial-chain branch joint layouts suitable for the chosen in-parallel structure is defined. Arguments based upon kinematic equivalency of the branches and mobility of the assembled in-parallel manipulator chain are used to show that there exist only five unique branch joint-layouts belonging to the KS class. It is demonstrated that the solution to the inverse displacement problem for in-parallel manipulators based on the KS branches can be expressed in a closed form. Furthermore, the 3–2,2,2 in-parallel manipulators are shown to belong to a family of manipulators whose forward displacement solutions can be resolved through roots of a 16th order polynomial.

Classification of 6-SPS Parallel Manipulators According to Their Components

2000 ◽  
Author(s):  
Xianwen Kong ◽  
Clément M. Gosselin
Keyword(s):  
Parallel Manipulator ◽  
Kinematic Chain ◽  
Parallel Manipulators ◽  
Rigid Bodies ◽  
Type Synthesis ◽  
Forward Displacement ◽  
Quadratic Equations ◽  
Straight Lines ◽  
Forward Displacement Analysis

Abstract The complexity of the forward displacement analysis (FDA) of 6-SPS parallel manipulators1 varies to a great extent with the change of their geometric parameters. This paper presents a classification of the 6-SPS parallel manipulators according to their components. At first, we give the components for the 6-SPS parallel manipulator. A component refers to a part of the 6-SPS kinematic chain in which the number of actuators is equivalent to the degree of freedom. In addition to the commonly used rigid bodies, points and (straight) lines are also taken as elements of the components. Type synthesis of the 6-SPS parallel manipulators is then performed. The influence of the types of components on the maximal numbers of configurations and the degrees of the characteristic polynomials of the 6-SPS parallel manipulators is then revealed. The number of redundant sensors needed to reduce the FDA of 6-SPS parallel manipulators to the solution of several univariate quadratic equations in sequence based on the component method is also presented.

Type Synthesis of Uncoupled 2T2R Parallel Manipulators

2012 ◽  
Author(s):  
Yanbin Zhang ◽  
Kwun-lon Ting
Keyword(s):  
Parallel Manipulator ◽  
Screw Theory ◽  
Control Design ◽  
Parallel Manipulators ◽  
Velocity Space ◽  
Type Synthesis ◽  
Systematic Method ◽  
Structure Synthesis ◽  
Hybrid Manipulator ◽  
Actuated Joints

This paper presents a simple and systematic method for type synthesis of four-degree-of-freedom uncoupled parallel manipulators with two-translational and two-rotational (2T2R) motion components. Based on the concept of hybrid manipulator, one uncoupled 2T2R hybrid manipulator, which is composed of one full-isotropic planar 2T1R parallel manipulator and one revolute joint in serial assembly, is designed first. Then the structure synthesis of the fourth leg of 2T2R parallel manipulator is performed in terms of the reciprocal screw theory. Finally, the type synthesis of uncoupled 2T2R parallel manipulators is realized by combining the uncoupled 2T2R hybrid manipulator and one of the synthesized fourth legs. The Jacobian of the uncoupled 2T2R parallel manipulator is a 4×4 diagonal matrix. Therefore, there exists a one-to-one correspondence between the input velocity space of the actuated joints and the output velocity space of the moving platform. Moreover, both the control design and the path planning of these proposed manipulators are very simple.

Forward Displacement Analysis and Singularity Analysis of a Special 2-DOF 5R Spherical Parallel Manipulator

2011 ◽  
Vol 3 (2) ◽  
Author(s):  
Xianwen Kong
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Type I ◽  
Forward Displacement ◽  
Displacement Analysis ◽  
Singular Configuration ◽  
Self Motion ◽  
Spherical Parallel Manipulator ◽  
Forward Displacement Analysis

This paper deals with the forward displacement analysis and singularity analysis of a special 2-DOF 5R spherical parallel manipulator, in which the angle between the axes of any two adjacent revolute joints is a right angle. An alternative formulation of the kinematic equations of the 5R spherical parallel manipulator is proposed. A formula is then derived to produce directly the unique current solution to the forward displacement analysis of the 5R spherical parallel manipulator. It will also be addressed to keep the spherical parallel manipulator in the same working mode and assembly mode by simply restraining the range of an input angle. Unlike other parallel manipulators, the 5R spherical parallel manipulator always undergoes self-motion in a type-II singular configuration, and the 3R leg of the 5R spherical parallel manipulator also always undergoes self-motion in a type-I singular configuration.

Forward Displacement Analysis and Singularity Analysis of a 2-DOF 5R Spherical Parallel Manipulator

2009 ◽  
Author(s):  
Xianwen Kong
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Alternative Formulation ◽  
Forward Displacement ◽  
Displacement Analysis ◽  
Singular Configuration ◽  
Self Motion ◽  
Spherical Parallel Manipulator ◽  
Forward Displacement Analysis

This paper deals with the forward displacement analysis and singularity analysis of a 2-DOF 5R spherical parallel manipulator. An alternative formulation of the kinematic equations of the 2-DOF spherical parallel manipulator is proposed. A formula is then derived to produce directly the unique current solution to the FDA of the 2-DOF spherical parallel manipulator. It is proved that the formula is associated with the same assembly mode and working mode as the reference configuration of the spherical parallel manipulator. Unlike other parallel manipulators, the 2-DOF 5R spherical parallel manipulator always undergoes self-motion in a Type 2 singular configuration, and the 3R leg of the 2-DOF spherical parallel manipulator also always undergoes self-motion in a Type 1 singular configuration.

Synthesis and Design of a Novel 3T1R Fully-Parallel Manipulator

2008 ◽  
Vol 130 (4) ◽  
Author(s):  
Oscar Salgado ◽  
Oscar Altuzarra ◽  
Víctor Petuya ◽  
Alfonso Hernández
Keyword(s):  
Closed Form ◽  
Kinematic Analysis ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Type Synthesis ◽  
Complete Type ◽  
Pick And Place ◽  
Schönflies Motion

In this paper a new topology of four degrees-of-freedom 3T1R fully-parallel manipulator is presented, which is defined only using lower kinematic pairs. The paper starts with a complete type synthesis of different topologies of fully-parallel manipulators that can perform the so-called Schönflies motion, based on the Theory of Groups of Displacements. After imposing some practical requirements, the different possibilities of manipulators are reduced to only one topology of fully-parallel and fully-symmetrical parallel manipulator. Then, the kinematic analysis of the manipulator is shown, including the closed-form resolution of both forward and inverse position problems, the velocity and the singularity analysis. Finally, a prototype of the manipulator is presented, which is intended to be used in pick and place applications.

Sign in / Sign up

Export Citation Format

Share Document