Performance Optimization of Compact Ceramic High Temperature Heat Exchangers

2007 ◽  
Author(s):  
Q. Y. Chen ◽  
M. Zeng ◽  
D. H. Zhang ◽  
Q. W. Wang
Keyword(s):  
Heat Transfer ◽  
High Temperature ◽  
Heat Exchanger ◽  
Performance Optimization ◽  
Heat Exchangers ◽  
Radiation Heat Transfer ◽  
Surface Radiation ◽  
Radiation Heat ◽  
High Temperature Side ◽  
Temperature Heat

In the present paper, the compact ceramic high temperature heat exchangers with parallel offset strip fins and inclined strip fins (inclined angle β = 0∼70°) are investigated with CFD method. The numerical simulations are carried out for high temperature (1500°C), without and with radiation heat transfer, and the periodic boundary is used in transverse direction. The fluid of high temperature side is the standard flue gas. The material of heat exchanger is SiC. NuS-G.R(with surface and gaseous radiation heat transfer) is averagely higher than NuNo.R (without radiation heat transfer) by 7% and fS-G.R is averagely higher than fNo.R by 5%. NuS-G.R(with surface and gaseous radiation heat transfer) is averagely higher than NuS.R (with only surface radiation heat transfer) by 0.8% and fS-G.R is averagely higher than fS.R by 3%. The thermal properties have significantly influence on the heat transfer and pressure drop characteristics, respectively. The heat transfer performance of the ceramic heat exchanger with inclined fins (β = 30°) is the best.

Fluidized-Bed Heat Transfer Modeling for the Development of Particle/Supercritical-CO2 Heat Exchanger

2017 ◽  
Author(s):  
Zhiwen Ma ◽  
Janna Martinek
Keyword(s):  
Heat Transfer ◽  
High Temperature ◽  
Heat Exchanger ◽  
Fluidized Bed ◽  
Solid Particles ◽  
Heat Transfer Modeling ◽  
Power Cycle ◽  
Heat Exchanger Design ◽  
Temperature Heat ◽  
The Cost

Concentrating solar power (CSP) technology is moving toward high-temperature and high-performance design. One technology approach is to explore high-temperature heat-transfer fluids and storage, integrated with a high-efficiency power cycle such as the supercritical carbon dioxide (s-CO2) Brayton power cycle. The s-CO2 Brayton power system has great potential to enable the future CSP system to achieve high solar-to-electricity conversion efficiency and to reduce the cost of power generation. Solid particles have been proposed as a possible high-temperature heat-transfer medium that is inexpensive and stable at high temperatures above 1,000°C. The particle/heat exchanger provides a connection between the particles and s-CO2 fluid in the emerging s-CO2 power cycles in order to meet CSP power-cycle performance targets of 50% thermal-to-electric efficiency, and dry cooling at an ambient temperature of 40°C. The development goals for a particle/s-CO2 heat exchanger are to heat s-CO2 to ≥720°C and to use direct thermal storage with low-cost, stable solid particles. This paper presents heat-transfer modeling to inform the particle/s-CO2 heat-exchanger design and assess design tradeoffs. The heat-transfer process was modeled based on a particle/s-CO2 counterflow configuration. Empirical heat-transfer correlations for the fluidized bed and s-CO2 were used in calculating the heat-transfer area and optimizing the tube layout. A 2-D computational fluid-dynamics simulation was applied for particle distribution and fluidization characterization. The operating conditions were studied from the heat-transfer analysis, and cost was estimated from the sizing of the heat exchanger. The paper shows the path in achieving the cost and performance objectives for a heat-exchanger design.

Viability of Ceramic High Temperature Heat Exchangers in NGNP Applications

2008 ◽  
Author(s):  
Merrill A. Wilson ◽  
Charles Lewinsohn ◽  
James Cutts ◽  
Yitung Chen ◽  
Valery Ponyavin
Keyword(s):  
High Temperature ◽  
Heat Exchanger ◽  
Heat Exchangers ◽  
Ceramic Materials ◽  
Reliability Models ◽  
Tube Heat Exchanger ◽  
Temperature Heat ◽  
Intermediate Heat Exchanger ◽  
Recent Developments ◽  
Higher Temperature

The recent developments in the energy industry have kindled renewed interest in producing energy more efficiently. This has motivated the development of higher temperature cycles and their associated equipment. In this paper we will discuss several design configurations coupled with the inherent properties of preferred ceramic materials to assess the viability and design reliability of ceramic heat exchangers for next generation high temperature heat exchangers. These analyses have been extended to conceptually compare the traditional shell and tube heat exchanger with shell and plate heat exchangers. These analyses include hydrodynamic, heat transfer, mechanical stress and reliability models applicable to an Intermediate Heat Exchanger (IHX) and Process Coupling Heat Exchangers. It was found that ceramic micro-channel heat exchanger designs proved to have the greatest reliability due to their inherent mechanical properties, minimal thermo-mechanical stresses while improving the performance efficiency in a compact footprint.

Sign in / Sign up

Export Citation Format

Share Document