NO Prediction in Turbulent Diffusion Flame Using Multiple Unsteady Laminar Flamelet Modeling

Author(s):  
Rakesh Yadav ◽  
Pravin Rajeshirke ◽  
Pravin Nakod

The steady laminar flamelet model (SLFM) [1, 2] has been shown to be reasonably good for the predictions of mean temperature and the major species in turbulent flames [3, 4]. However, the SLFM approach has limitations in the prediction of the slow chemistry phenomena like NO formation [5, 6]. In case of SLFM, the turbulence and chemistry are coupled through a single variable, called scalar dissipation, which is representative of the strain inside the flow. The SLFM model is not able to respond to the steep changes in the scalar dissipation values and generally tend to approach to the equilibrium solution as the strain relaxes [7]. The pollutant like NO is formed in the post flame zones and with a high residence time, where the scalar dissipation diminishes and hence the NO is over predicted using SLFM approach. In order to improve the prediction of slow forming species, a transient history of the scalar dissipation evolution is required. In this work, a multiple unsteady laminar flamelet approach is implemented and used to model the NO formation in two turbulent diffusion flames using detailed chemistry. In this approach, multiple unsteady flamelet equations are solved, where each flamelet is associated with its own scalar dissipation history. The time averaged mean variables are calculated from weighted average contributions from different flamelets. The unsteady laminar flamelet solution starts with a converged solution obtained from steady laminar flamelet modeling approach. The unsteady flamelet equations are therefore solved as a post processing step with the frozen flow field. The domain averaged scalar dissipation for a flamelet at each time step is obtained by solving a scalar transport equation, which represents the probability of occurrence of the considered flamelet. The present work involves the study of the effect of number of flamelets and also the different methods of probability initialization on the accuracy of NO prediction. The current model predictions are compared with the experimental data. It is seen that the NO predictions improves significantly even with a single unsteady flamelet and further improves marginally with an increase in number of unsteady flamelets.

Author(s):  
Rakesh Yadav ◽  
Pravin Nakod ◽  
Pravin Rajeshirke

The steady laminar flamelet model (SLFM) (Peters, 1984, “Laminar Diffusion Flamelet Models in Non-Premixed Turbulent Combustion,” Prog. Energy Combust. Sci., 10(3), pp. 319–339; Peters, 1986, “Laminar Flamelet Concepts in Turbulent Combustion,” Symp. (Int.) Combust., 21(1), pp. 1231–1250) has been shown to be reasonably good for the predictions of mean temperature and the major species in turbulent flames (Borghi, 1988, “Turbulent Combustion Modeling,” Prog. Energy Combust. Sci., 14(4), pp. 245–292; Veynante and Vervisch, 2002, “Turbulent Combustion Modeling,” Prog. Energy Combust. Sci., 28(3), pp. 193–266). However, the SLFM approach has limitations in the prediction of slow chemistry phenomena like NO formation (Benim and Syed, 1998, “Laminar Flamelet Modeling of Turbulent Premixed Combustion,” Appl. Math. Model., 22(1–2), pp. 113–136; Heyl and Bockhorn, 2001, “Flamelet Modeling of NO Formation in Laminar and Turbulent Diffusion Flames,” Chemosphere, 42(5–7), pp. 449–462). In the case of SLFM, the turbulence and chemistry are coupled through a single variable called scalar dissipation, which is representative of the strain inside the flow. The SLFM is not able to respond to the steep changes in the scalar dissipation values and generally tends to approach to the equilibrium solution as the strain relaxes (Haworth et al., 1989, “The Importance of Time-Dependent Flame Structures in Stretched Laminar Flamelet Models for Turbulent Jet Diffusion Flames,” Symp. (Int.) Combust., 22(1), pp. 589–597). A pollutant like NO is formed in the post flame zones and with a high residence time, where the scalar dissipation diminishes and hence the NO is overpredicted using the SLFM approach. In order to improve the prediction of slow forming species, a transient history of the scalar dissipation evolution is required. In this work, a multiple unsteady laminar flamelet approach is implemented and used to model the NO formation in two turbulent diffusion flames using detailed chemistry. In this approach, multiple unsteady flamelet equations are solved, where each flamelet is associated with its own scalar dissipation history. The time averaged mean variables are calculated from weighted average contributions from different flamelets. The unsteady laminar flamelet solution starts with a converged solution obtained from the steady laminar flamelet modeling approach. The unsteady flamelet equations are, therefore, solved as a post processing step with the frozen flow field. The domain averaged scalar dissipation for a flamelet at each time step is obtained by solving a scalar transport equation, which represents the probability of occurrence of the considered flamelet. The present work involves the study of the effect of the number of flamelets and also the different methods of probability initialization on the accuracy of NO prediction. The current model predictions are compared with the experimental data. It is seen that the NO predictions improves significantly even with a single unsteady flamelet and further improves marginally with an increase in number of unsteady flamelets.


2018 ◽  
Vol 2018 ◽  
pp. 1-13
Author(s):  
Yinli Xiao ◽  
Zupeng Wang ◽  
Zhengxin Lai ◽  
Wenyan Song

The development of high-performance aeroengine combustion chambers strongly depends on the accuracy and reliability of efficient numerical models. In the present work, a reacting solver with a steady laminar flamelet model and spray model has been developed in OpenFOAM and the solver details are presented. The solver is firstly validated by Sandia/ETH-Zurich flames. Furthermore, it is used to simulate nonpremixed kerosene/air spray combustion in an aeroengine combustion chamber with the RANS method. A comparison with available experimental data shows good agreement and validates the capability of the new developed solver in OpenFOAM.


Author(s):  
M. A. Gadalla ◽  
M. A. R. Sharif

Abstract A mathematical/empirical model compatible with the jet mixing theory for predicting the flow field properties, flame envelope, temperature distribution, and flame heights around a free vertical axi-symmetric turbulent diffusion flame has been developed. The model considers the effects of buoyancy force and the relative angle between the reactant jets. The flames are issued from a burner which consists of a central air jet and an annular fuel (commercial butane) jet. The annular jet is issued either vertically or at an angle to the flame axis. Experiments were performed earlier to measure the temperature distribution and concentration of carbon dioxide and oxygen in such flames. Three angular positions of the annular fuel jet and nine burner geometries were investigated. The model predictions in similar configurations are found to be in fair agreement with the experimental data.


Sign in / Sign up

Export Citation Format

Share Document