oxide formation
Recently Published Documents





2022 ◽  
Vol 210 ◽  
pp. 114419
Daniel K. Schreiber ◽  
Elizabeth J. Kautz ◽  
Matthew J. Olszta ◽  
Karen Kruska ◽  
Angela Y. Gerard ◽  

Materials ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6599
Eri Miura-Fujiwara ◽  
Soichiro Yamada ◽  
Keisuke Mizushima ◽  
Masahiko Nishijima ◽  
Yoshimi Watanabe ◽  

We found that specific biomedical Ti and its alloys, such as CP Ti, Ti–29Nb–13Ta–4.6Zr, and Ti–36Nb–2Ta–3Zr–0.3O, form a bright white oxide layer after a particular oxidation heat treatment. In this paper, the interfacial microstructure of the oxide layer on Ti–29Nb–13Ta–4.6Zr and the exfoliation resistance of commercially pure (CP) Ti, Ti–29Nb–13Ta–4.6Zr, and Ti–36Nb–2Ta–3Zr–0.3O were investigated. The alloys investigated were oxidized at 1273 or 1323 K for 0.3–3.6 ks in an air furnace. The exfoliation stress of the oxide layer was high in Ti–29Nb–13Ta–4.6Zr and Ti–36Nb–2Ta–3Zr–0.3O, and the maximum exfoliation stress was as high as 70 MPa, which is almost the same as the stress exhibited by epoxy adhesives, whereas the exfoliation stress of the oxide layer on CP Ti was less than 7 MPa, regardless of duration time. The nanoindentation hardness and frictional coefficients of the oxide layer on Ti–29Nb–13Ta–4.6Zr suggested that the oxide layer was hard and robust enough for artificial tooth coating. The cross-sectional transmission electron microscopic observations of the microstructure of oxidized Ti–29Nb–13Ta–4.6Zr revealed that a continuous oxide layer formed on the surface of the alloys. The Au marker method revealed that both in- and out-diffusion occur during oxidation in Ti–29Nb–13Ta–4.6Zr and Ti–36Nb–2Ta–3Zr–0.3O, whereas only out-diffusion governs oxidation in CP Ti. The obtained results indicate that the high exfoliation resistance of the oxide layer on Ti–29Nb–13Ta–4.6Zr and Ti-36Nb-2Ta-3Zr-0.3O are attributed to their dense microstructures composing of fine particles, and a composition-graded interfacial microstructure. On the basis of the results of our microstructural observations, the oxide formation mechanism of the Ti–Nb–Ta–Zr alloy is discussed.

2021 ◽  
pp. 102954
Hamed Pourzolfaghar ◽  
Soraya Hosseini ◽  
Fathiah Mohamed Zuki ◽  
Marziyeh Alinejad ◽  
Yuan-Yao Li

2021 ◽  
Vol MA2021-02 (6) ◽  
pp. 541-541
Manila Ozhukil Valappil ◽  
Farisa Forouzandeh ◽  
Marwa Atwa ◽  
Samantha Luong ◽  
Viola Ingrid Birss

Sign in / Sign up

Export Citation Format

Share Document