Experimental Study on Heat Transfer of Single-Phase Flow and Boiling Two-Phase Flow in Vertical Narrow Annuli

2002 ◽  
Author(s):  
Suizheng Qiu ◽  
Minoru Takahashi ◽  
Guanghui Su ◽  
Dounan Jia
Keyword(s):  
Heat Transfer ◽  
Single Phase ◽  
Two Phase Flow ◽  
Annular Channel ◽  
Phase Flow ◽  
Single Phase Flow ◽  
Transfer Coefficients ◽  
Two Phase ◽  
Narrow Annuli ◽  
Narrow Gaps

Water single-phase and nucleate boiling heat transfer were experimentally investigated in vertical annuli with narrow gaps. The experimental data about water single-phase flow and boiling two-phase flow heat transfer in narrow annular channel were accumulated by two test sections with the narrow gaps of 1.0mm and 1.5mm. Empirical correlations to predict the heat transfer of the single-phase flow and boiling two-phase flow in the narrow annular channel were obtained, which were arranged in the forms of the Dittus-Boelter for heat transfer coefficients in a single-phase flow and the Jens-Lottes formula for a boiling two-phase flow in normal tubes, respectively. The mechanism of the difference between the normal channel and narrow annular channel were also explored. From experimental results, it was found that the turbulent heat transfer coefficients in narrow gaps are nearly the same to the normal channel in the experimental range, and the transition Reynolds number from a laminar flow to a turbulent flow in narrow annuli was much lower than that in normal channel, whereas the boiling heat transfer in narrow annular gap was greatly enhanced compared with the normal channel.

Pressure Drop During Two-Phase Flow of R134a and R32 in a Single Minichannel

2009 ◽  
Vol 131 (3) ◽  
Author(s):  
Alberto Cavallini ◽  
Davide Del Col ◽  
Marko Matkovic ◽  
Luisa Rossetto
Keyword(s):  
Heat Transfer ◽  
Surface Roughness ◽  
Single Phase ◽  
Two Phase Flow ◽  
Vapor Flow ◽  
Phase Flow ◽  
Single Phase Flow ◽  
Roughness Effects ◽  
Two Phase ◽  
Adiabatic Flow

Condensation in minichannels is widely used in air-cooled condensers for the automotive and air-conditioning industry, heat pipes, and compact heat exchangers. The knowledge of pressure drops in such small channels is important in order to optimize heat transfer surfaces. Most of the available experimental work refers to measurements obtained within multiport smooth extruded tubes and deal with the average values over the number of parallel channels. In this context, the present authors have set up a new test apparatus for heat transfer and fluid flow studies in single minichannels. This paper presents new experimental frictional pressure gradient data, relative to single-phase flow and adiabatic two-phase flow of R134a and R32 inside a single horizontal minitube, with a 0.96 mm inner diameter and with not-negligible surface roughness. The new all-liquid and all-vapor data are successfully compared against predictions of single-phase flow models. Also the two-phase flow data are compared against a model previously developed by the present authors for adiabatic flow or flow during condensation of halogenated refrigerants inside smooth minichannels. Surface roughness effects on the liquid-vapor flow are discussed. In this respect, the friction factor in the proposed model is modified, in order to take into consideration also effects due to wall roughness.

Frictional Pressure Drops During Vapour-Liquid Flow in Minichannels: Experimental Data and Modelling

2008 ◽  
Author(s):  
Alberto Cavallini ◽  
Davide Del Col ◽  
Marko Matkovic ◽  
Luisa Rossetto
Keyword(s):  
Heat Transfer ◽  
Surface Roughness ◽  
Single Phase ◽  
Two Phase Flow ◽  
Phase Flow ◽  
Single Phase Flow ◽  
Roughness Effects ◽  
Two Phase ◽  
Pressure Drops ◽  
Adiabatic Flow

Condensation in minichannels is widely used in air-cooled condensers for the automotive and air-conditioning industry, in heat pipes and other applications for cooling electronics. The knowledge of pressure drops in such small channels is important in order to optimize heat transfer surfaces. Most of the available experimental work refers to measurements obtained within multiport smooth extruded tubes and deal with the average values over the number of parallel channels. In this context, the present authors have set up a new test apparatus for heat transfer and fluid flow studies in single minichannels. This paper presents new experimental frictional pressure gradient data, relative to single-phase flow and adiabatic two-phase flow of R134a inside a single horizontal mini tube, with 0.96 mm inner diameter and with not-negligible surface roughness. The new all-liquid and all-vapour data are successfully compared against predictions of single-phase flow models. Also the two-phase flow data are compared against Cavallini et al. [1, 2] model, valid for adiabatic flow or for flow during condensation of halogenated refrigerants inside smooth minichannels. Surface roughness effects on the liquid-vapour flow are discussed. In this respect, the friction factor in the proposed model is modified, in order to take into consideration also effects due to wall roughness.

Turbulence Structure of a Liquid-Solid Two-Phase Jet by Means of Laser Techniques

2003 ◽  
Author(s):  
Toshimichi Arai ◽  
Naoki Kudo ◽  
Tsuneaki Ishima ◽  
Ismail M. Youssef ◽  
Tomio Obokata ◽  
...  
Keyword(s):  
Particle Size ◽  
Single Phase ◽  
Two Phase Flow ◽  
Volume Ratio ◽  
Water Phase ◽  
Phase Flow ◽  
Size Discrimination ◽  
Single Phase Flow ◽  
Particle Volume ◽  
Two Phase

Characteristics on particle motion in a liquid-solid two-phase jet flow were studied in the paper. The water jet including glass particle of 389 μm in mean diameter was injected into water bath. The experimental conditions were 0.21% of initial particle volume ratio, 5mm in pipe diameter and 1.84 m/s of mean velocity on outlet of the jet. A laser Doppler anemometer (LDA) with size discrimination was applied for measuring the time serious velocities of the single-phase flow, particle and water phase flow. A particle image velocimetry (PIV) was also applied in the two-phase flow. The normal PIV method can hardly measure the particle size and perform the particle size discrimination. In the experiment, using the gray scales related with the scattering light intensity, measuring method with size discrimination in two-phase flow was carried out. The experimental results show less difference between velocities of single-phase flow and water-phase flow under this low particle volume ratio condition. Particles have the relative motion with the water-phase and large rms velocity. The PIV used in this experiment, which is called multi-intensity-layer-PIV: MILP, can measure water-phase velocity with good accuracy.

Heat Transfer in Annular Channel With Continuous Flow Twisting

2010 ◽  
Author(s):  
S. E. Tarasevich ◽  
A. B. Yakovlev
Keyword(s):  
Heat Transfer ◽  
Single Phase ◽  
Flow Boiling ◽  
Annular Channel ◽  
Equivalent Diameter ◽  
Phase Flow ◽  
Two Phase ◽  
Channel Diameter ◽  
Subcooled Flow Boiling ◽  
Annular Channels

In paper the experimental results on a heat transfer in annular channels with continuous twisting at length at one- and two-phase flows are observed. For a flow twisting the wire was spirally coiled on the central body of the annular channel (diameter of a wire is equal to annular gap altitude). Results of experimental data of a heat transfer of authors and various researchers at a single phase flow in annular channels with a continuous twisting are analyzed. Sampling of diagnostic variables (equivalent diameter and velocity) is spent and generalizing associations for heat transfer calculation on the concave and convex surfaces in a single-phase phase are offered. Also the technique of definition of temperature of the subcooled flow boiling beginning on surfaces of annular channels with a twisting is offered. Features of boiling, origination of heat transfer crisis and results of visualization of a two-phase flow structure in annular channels with twisting are described.

Research on Two-Phase Flow Induced Vibration Characteristics of U-Tube Bundles

2017 ◽  
Author(s):  
Jiang Nai-bin ◽  
Gao Li-xia ◽  
Huang Xuan ◽  
Zang Feng-gang ◽  
Xiong Fu-rui
Keyword(s):  
Upper Bound ◽  
Single Phase ◽  
Two Phase Flow ◽  
Tube Bundle ◽  
Upper Bounds ◽  
Vibration Response ◽  
Phase Flow ◽  
Single Phase Flow ◽  
Two Phase ◽  
Tube Bundles

In steam generators and other heat exchangers, there are a lot of tube bundles subjected to two-phase cross-flow. The fluctuating pressure on tube bundle caused by turbulence can induce structural vibration. The experimental data from a U-tube bundle of steam generator in air-water flow loop are analyzed in this work. The different upper bounds of buffeting force are used to calculate the turbulence buffeting response of U-tubes, and the calculation results are compared with the experimental results. The upper bounds of buffeting force include one upper bound based on single-phase flow, and two upper bounds based on two-phase flow. It is shown that the upper bound based on single-phase flow seriously underestimated the turbulence excitation, the calculated vibration response is much less than the experimental measurement. On the other hand, the vibration response results calculated with the upper bounds based on two-phase flow are closer to the measured results under most circumstances.

Sign in / Sign up

Export Citation Format

Share Document