Heat Transfer in Annular Channel With Continuous Flow Twisting

2010 ◽  
Author(s):  
S. E. Tarasevich ◽  
A. B. Yakovlev
Keyword(s):  
Heat Transfer ◽  
Single Phase ◽  
Flow Boiling ◽  
Annular Channel ◽  
Equivalent Diameter ◽  
Phase Flow ◽  
Two Phase ◽  
Channel Diameter ◽  
Subcooled Flow Boiling ◽  
Annular Channels

In paper the experimental results on a heat transfer in annular channels with continuous twisting at length at one- and two-phase flows are observed. For a flow twisting the wire was spirally coiled on the central body of the annular channel (diameter of a wire is equal to annular gap altitude). Results of experimental data of a heat transfer of authors and various researchers at a single phase flow in annular channels with a continuous twisting are analyzed. Sampling of diagnostic variables (equivalent diameter and velocity) is spent and generalizing associations for heat transfer calculation on the concave and convex surfaces in a single-phase phase are offered. Also the technique of definition of temperature of the subcooled flow boiling beginning on surfaces of annular channels with a twisting is offered. Features of boiling, origination of heat transfer crisis and results of visualization of a two-phase flow structure in annular channels with twisting are described.

Experimental Study on Heat Transfer of Single-Phase Flow and Boiling Two-Phase Flow in Vertical Narrow Annuli

2002 ◽  
Author(s):  
Suizheng Qiu ◽  
Minoru Takahashi ◽  
Guanghui Su ◽  
Dounan Jia
Keyword(s):  
Heat Transfer ◽  
Single Phase ◽  
Two Phase Flow ◽  
Annular Channel ◽  
Phase Flow ◽  
Single Phase Flow ◽  
Transfer Coefficients ◽  
Two Phase ◽  
Narrow Annuli ◽  
Narrow Gaps

Water single-phase and nucleate boiling heat transfer were experimentally investigated in vertical annuli with narrow gaps. The experimental data about water single-phase flow and boiling two-phase flow heat transfer in narrow annular channel were accumulated by two test sections with the narrow gaps of 1.0mm and 1.5mm. Empirical correlations to predict the heat transfer of the single-phase flow and boiling two-phase flow in the narrow annular channel were obtained, which were arranged in the forms of the Dittus-Boelter for heat transfer coefficients in a single-phase flow and the Jens-Lottes formula for a boiling two-phase flow in normal tubes, respectively. The mechanism of the difference between the normal channel and narrow annular channel were also explored. From experimental results, it was found that the turbulent heat transfer coefficients in narrow gaps are nearly the same to the normal channel in the experimental range, and the transition Reynolds number from a laminar flow to a turbulent flow in narrow annuli was much lower than that in normal channel, whereas the boiling heat transfer in narrow annular gap was greatly enhanced compared with the normal channel.

Thermofluid Characteristics of Two-Phase Microgap Coolers

2007 ◽  
Author(s):  
Dae W. Kim ◽  
Emil Rahim ◽  
Avram Bar-Cohen ◽  
Bongtae Han
Keyword(s):  
Heat Transfer ◽  
Numerical Model ◽  
Pressure Drop ◽  
Single Phase ◽  
Flow Boiling ◽  
Phase Flow ◽  
Dissolved Gas ◽  
Single Phase Flow ◽  
Two Phase ◽  
Phase Water

The thermofluid characteristics of a chip-scale microgap cooler, including single-phase flow of water and FC-72 and flow boiling of FC-72, are explored. Heat transfer and pressure drop results for single phase water are used to validate a detailed numerical model and, together with the convective FC-72 data, establish a baseline for microgap cooler performance. Experimental results for single phase water and FC-72 flowing in 120 μm, 260 μm and 600 μm microgap coolers, 31mm wide by 34mm long, at velocities of 0.1 – 2 m/s are reported. “Pseudo-boiling” driven by dissolved gas and flow boiling of FC-72 are found to provide significant enhancement in heat transfer relative to theoretical single phase values.

A New Thermodynamic and Heat Transfer Model for Nanolubricants and Refrigerant Heat Transfer Processes in Smooth Copper Tubes

2020 ◽  
Vol 142 (8) ◽  
Author(s):  
Pratik S. Deokar ◽  
Lorenzo Cremaschi ◽  
Andrea A. M. Bigi
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Single Phase ◽  
Flow Boiling ◽  
Heat Transfer Model ◽  
Forced Flow ◽  
Transfer Model ◽  
Phase Flow ◽  
Two Phase

Abstract In air conditioning systems, lubricating oil leaves the compressor and circulates through the other system components. This lubricant acts as a contaminant affecting heat transfer in heat exchangers. The literature indicated that mixtures of refrigerants and nanolubricants, that is, nanoparticles dispersed in the lubricant oils, have potentials to augment heat transfer exchange effectiveness. However, the nanoparticle mechanisms leading to such heat transfer changes are still unclear and not well included in the models. In this work, an existing single-phase forced flow convective heat transfer model, originally developed for water-based nanofluids, was modified to include the effects of diffusion and mass balance of different shape nanoparticles within the laminar sublayer and turbulent layer of the flow. A new physics-based superposition heat transfer model for saturated two-phase flow boiling of refrigerant and nanolubricants was also developed by integrating the modified forced flow convective heat transfer model and a semi-empirical pool boiling model for nanolubricants. The new model included the several physical effects that influenced heat transfer, such as slip mechanisms at the nanoparticles and base fluid interface and its influence on the laminar sublayer thickness, momentum transfer from the nanoparticles to the growing bubbles, and formation of lubricant excess concentration at the tube surface and its influence on bubble growth and tube wetting. The new model was validated for single-phase convective heat transfer and two-phase flow boiling of refrigerant R410A with two nanolubricants, having nonspherical ZnO nanoparticles and spherical Al2O3 nanoparticles.

Numerical Simulation of Subcooled Flow Boiling Heat Transfer in Helical Tubes

2008 ◽  
Vol 131 (1) ◽  
Author(s):  
Jong Chull Jo ◽  
Woong Sik Kim ◽  
Chang-Yong Choi ◽  
Yong Kab Lee
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Steam Generator ◽  
Two Phase Flow ◽  
Flow Boiling ◽  
Heat Transfer Analysis ◽  
Normal Operation ◽  
Phase Flow ◽  
Two Phase ◽  
Side Flow

This paper addresses the numerical simulation of two-phase flow heat transfer in the helically coiled tubes of an integral type pressurized water reactor steam generator under normal operation using a computational fluid dynamics code. The shell-side flow field where a single-phase fluid flows in the downward direction is also calculated in conjunction with the tube-side two-phase flow characteristics. For the calculation of tube-side two-phase flow, the inhomogeneous two-fluid model is used. Both the Rensselaer Polytechnic Institute wall boiling model and the bulk boiling model are implemented for the numerical simulations of boiling-induced two-phase flow in a vertical straight pipe and channel, and the computed results are compared with the available measured data. The conjugate heat transfer analysis method is employed to calculate the conduction in the tube wall with finite thickness and the convections in the internal and external fluids simultaneously so as to match the fluid-wall-fluid interface conditions properly. Both the internal and external turbulent flows are simulated using the standard k-ε model. From the results of the present numerical simulation, it is shown that the bulk boiling model can be applied to the simulation of two-phase flow in the helically coiled steam generator tubes. In addition, the present simulation method is considered to be physically plausible in the light of discussions on the computed results.

Flow Boiling Heat Transfer and Two-Phase Flow Instability of Nanofluids in a Minichannel

2015 ◽  
Vol 137 (5) ◽  
Author(s):  
Leyuan Yu ◽  
Aritra Sur ◽  
Dong Liu
Keyword(s):  
Heat Transfer ◽  
Boiling Heat Transfer ◽  
Two Phase Flow ◽  
Flow Instability ◽  
Flow Boiling ◽  
Nucleate Boiling ◽  
Flow Instabilities ◽  
Phase Flow ◽  
Two Phase ◽  
Flow Boiling Heat Transfer

Single-phase convective heat transfer of nanofluids has been studied extensively, and different degrees of enhancement were observed over the base fluids, whereas there is still debate on the improvement in overall thermal performance when both heat transfer and hydrodynamic characteristics are considered. Meanwhile, very few studies have been devoted to investigating two-phase heat transfer of nanofluids, and it remains inconclusive whether the same pessimistic outlook should be expected. In this work, an experimental study of forced convective flow boiling and two-phase flow was conducted for Al2O3–water nanofluids through a minichannel. General flow boiling heat transfer characteristics were measured, and the effects of nanofluids on the onset of nucleate boiling (ONB) were studied. Two-phase flow instabilities were also explored with an emphasis on the transition boundaries of onset of flow instabilities (OFI). It was found that the presence of nanoparticles delays ONB and suppresses OFI, and the extent is correlated to the nanoparticle volume concentration. These effects were attributed to the changes in available nucleation sites and surface wettability as well as thinning of thermal boundary layers in nanofluid flow. Additionally, it was observed that the pressure-drop type flow instability prevails in two-phase flow of nanofluids, but with reduced amplitude in pressure, temperature, and mass flux oscillations.

Sign in / Sign up

Export Citation Format

Share Document