Interpreting Microscopic Magnetic Resonance Elastography Measurements Using Finite Element Analysis

2013 ◽  
Author(s):  
Yifei Liu ◽  
Temel Yasar ◽  
Thomas J. Royston
Keyword(s):  
Finite Element Analysis ◽  
Wave Propagation ◽  
Magnetic Resonance ◽  
Material Parameter ◽  
Shear Stiffness ◽  
Small Dimension ◽  
Magnetic Resonance Elastography ◽  
Element Analysis ◽  
Axisymmetric Shell ◽  
Parameter Values

Microscopic Magnetic Resonance Elastography (μMRE) could be useful in estimating the shear stiffness of biological or other samples of small dimension. In this study, a silicon rubber phantom shell with liquid inside of it was measured using μMRE. A parametric simulation study of a simplified axisymmetric shell model was performed in order to interpret the wave propagation and how it is affected by the material parameter values.

scholarly journals Simulasi Pembebanan Komponen Bender pada Desain Mesin Begel Fabricator Menggunakan Software Autodesk Inventor 2020

2021 ◽  
Vol 2 (2) ◽  
pp. 93-97
Author(s):  
Satriawan Dini Hariyanto ◽  
Wikan Kurniawan
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cast Iron ◽  
Mild Steel ◽  
Modulus Of Elasticity ◽  
Material Parameter ◽  
Element Analysis ◽  
Material Parameters ◽  
Constituent Material ◽  
Loading Parameter

Stress analysis of the bender components in the design of the begel fabricator machine was carried out using FEA (Finite Element Analysis) with three variations of the constituent material parameters, namely 6061 aluminum, mild steel, and cast iron with a modulus of elasticity of 68.9 GPa, 220 GPa, 120.5 GPa, respectively. The test is carried out by a loading parameter 2520 MPa and fixed constraint. The maximum von misses stress and displacement obtained for each material parameter components using aluminum, mild steel, and cast iron are 17.78 MPa; 0.00765, 17.49 MPa; 0.00229, 17.62 MPa; 0.00427 respectively.

Prediction of Cutting Force in Bone Cutting Using Finite Element Analysis

2021 ◽  
Author(s):  
Varatharajan Prasannavenkadesan ◽  
Ponnusamy Pandithevan
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cutting Force ◽  
Material Model ◽  
Tensile Tests ◽  
Bovine Bone ◽  
Element Analysis ◽  
Cutting Processes ◽  
Parameter Values ◽  
First Time

Abstract In orthopedic surgery, bone cutting is an indispensable procedure followed by the surgeons to treat the fractured and fragmented bones. Because of the unsuitable parameter values used in the cutting processes, micro crack, fragmentation, and thermal osteonecrosis of bone are observed. Therefore, prediction of suitable cutting force is essential to subtract the bone without any adverse effect. In this study, the Cowper-Symonds model for bovine bone was developed for the first time. Then the developed model was coupled with the finite element analysis to predict the cutting force. To determine the model constants, tensile tests with different strain rates (10−5/s, 10−4/s, 10−3/s, and 1/s) were conducted on the cortical bone specimens. The developed material model was implemented in the bone cutting simulation and validated with the experiments.

Sign in / Sign up

Export Citation Format

Share Document